failure of cluster while using IPC shared memory

Discussion:

Alceu R. de Freitas Jr.

2011-06-02 17:49:33 UTC

Hello everybody,

I finally got the cluster running and initiated some tests.

For that, I have two programs with the same funcionality and both uses fork() to parallelize the processing of data. The difference is that one of these programs use IPC Shared Memory so the children process can share state information between them.

I was able to execute the program that does not use IPC Shared Memory, but the second one generates errors and after some tries I even got a situation that I was not able to ssh to the node that started the program in port 2222. I had to restarted mannually both nodes.

The program is written in Perl and uses IPC::ShareLite module for IPC Shared Memory. The error message from the Perl program does not give much details (something like "cannot access key: invalid arguments) but I got messages from /var/log/messages file in the NFS root:

Jun 2 01:49:50 node2 kernel: [ 1214.533098] send_kerrighed_signal: 12 (events/1) -> 14079 (dup_finder4.pl)
Jun 2 01:49:52 node2 kernel: [ 1216.527589] send_kerrighed_signal: 13 (events/2) -> 14289 (dup_finder4.pl)
Jun 2 01:49:55 node2 kernel: [ 1219.519281] send_kerrighed_signal: 13 (events/2) -> 14627 (dup_finder4.pl)
Jun 2 01:49:57 node2 kernel: [ 1221.513803] send_kerrighed_signal: 14 (events/3) -> 14854 (dup_finder4.pl)
Jun 2 01:50:00 node2 kernel: [ 1224.505438] send_kerrighed_signal: 13 (events/2) -> 15219 (dup_finder4.pl)
Jun 2 01:50:03 node2 kernel: [ 1227.497135] send_kerrighed_signal: 13 (events/2) -> 15610 (dup_finder4.pl)
Jun 2 01:50:06 node2 kernel: [ 1230.488857] send_kerrighed_signal: 14 (events/3) -> 16048 (dup_finder4.pl)
Jun 2 01:50:09 node2 kernel: [ 1233.480463] send_kerrighed_signal: 11 (events/0) -> 16526 (dup_finder4.pl)
Jun 2 01:50:12 node2 kernel: [ 1236.472225] send_kerrighed_signal: 13 (events/2) -> 17072 (dup_finder4.pl)
Jun 2 01:50:15 node2 kernel: [ 1239.463852] send_kerrighed_signal: 11 (events/0) -> 17728 (dup_finder4.pl)
Jun 2 01:50:18 node2 kernel: [ 1242.455662] send_kerrighed_signal: 14 (events/3) -> 18596 (dup_finder4.pl)
Jun 2 01:50:47 node2 kernel: [ 1271.377249] send_kerrighed_signal: 12 (events/1) -> 19046 (dup_finder4.pl)
Jun 2 01:50:50 node2 kernel: [ 1274.368923] send_kerrighed_signal: 11 (events/0) -> 19368 (dup_finder4.pl)
Jun 2 01:50:53 node2 kernel: [ 1277.360605] send_kerrighed_signal: 11 (events/0) -> 19703 (dup_finder4.pl)
Jun 2 01:50:56 node2 kernel: [ 1280.352291] send_kerrighed_signal: 11 (events/0) -> 20058 (dup_finder4.pl)
Jun 2 01:50:58 node2 kernel: [ 1282.346796] send_kerrighed_signal: 12 (events/1) -> 20304 (dup_finder4.pl)
Jun 2 01:51:01 node2 kernel: [ 1285.338450] send_kerrighed_signal: 11 (events/0) -> 20716 (dup_finder4.pl)
Jun 2 01:51:03 node2 kernel: [ 1287.333000] send_kerrighed_signal: 14 (events/3) -> 21003 (dup_finder4.pl)
Jun 2 01:51:06 node2 kernel: [ 1290.324676] send_kerrighed_signal: 13 (events/2) -> 21478 (dup_finder4.pl)
Jun 2 01:51:09 node2 kernel: [ 1293.316392] send_kerrighed_signal: 13 (events/2) -> 22025 (dup_finder4.pl)
Jun 2 01:51:12 node2 kernel: [ 1296.307997] send_kerrighed_signal: 11 (events/0) -> 22666 (dup_finder4.pl)
Jun 2 01:51:14 node2 kernel: [ 1298.304930] send_kerrighed_signal: 14 (events/3) -> 23220 (dup_finder4.pl)
Jun 2 01:52:19 node2 kernel: [ 1363.123475] send_kerrighed_signal: 12 (events/1) -> 23931 (dup_finder5.pl)
Jun 2 01:52:19 node2 kernel: [ 1363.414932] Check why the page is dirty...
Jun 2 01:52:22 node2 kernel: [ 1366.115167] send_kerrighed_signal: 12 (events/1) -> 23934 (dup_finder5.pl)
Jun 2 01:52:29 node2 kernel: [ 1373.095781] send_kerrighed_signal: 12 (events/1) -> 23932 (dup_finder5.pl)
Jun 2 01:55:13 node2 kernel: [ 1537.224632] CPU 2
Jun 2 01:55:13 node2 kernel: [ 1537.224937] Modules linked in: remote_cache_filter threshold_filter freq_limit_filter mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 2 01:55:13 node2 kernel: [ 1537.225738] Pid: 2106, comm: krgrpc Not tainted 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 2 01:55:13 node2 kernel: [ 1537.226250] RIP: 0010:[<ffffffff810b881d>] [<ffffffff810b881d>] kfree+0x59/0xb8
Jun 2 01:55:13 node2 kernel: [ 1537.226801] RSP: 0018:ffff88011d48bc80 EFLAGS: 00010246
Jun 2 01:55:13 node2 kernel: [ 1537.227078] RAX: 0200000000080000 RBX: ffff880100000001 RCX: ffff88011d09a510
Jun 2 01:55:13 node2 kernel: [ 1537.227357] RDX: ffffe20000000000 RSI: 0000000000000123 RDI: ffffe20004800000
Jun 2 01:55:13 node2 kernel: [ 1537.227635] RBP: ffff88011d48bca0 R08: ffff88011d48bca0 R09: ffff88011e1f0108
Jun 2 01:55:13 node2 kernel: [ 1537.227915] R10: ffff88011d0e4600 R11: ffff880000015000 R12: ffff880100000001
Jun 2 01:55:13 node2 kernel: [ 1537.228194] R13: ffffffff8113c174 R14: 0000000000000001 R15: ffff88011d9dfe00
Jun 2 01:55:13 node2 kernel: [ 1537.228475] FS: 0000000000000000(0000) GS:ffff88002cc34000(0000) knlGS:0000000000000000
Jun 2 01:55:13 node2 kernel: [ 1537.228986] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Jun 2 01:55:13 node2 kernel: [ 1537.229262] CR2: 00007f1dcdd0e010 CR3: 0000000001001000 CR4: 00000000000006e0
Jun 2 01:55:13 node2 kernel: [ 1537.229540] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jun 2 01:55:13 node2 kernel: [ 1537.229819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jun 2 01:55:13 node2 kernel: [ 1537.230099] Process krgrpc (pid: 2106, threadinfo ffff88011d48a000, task ffff88011d698000)
Jun 2 01:55:13 node2 kernel: [ 1537.236596] ffff88011d48bca0 ffff880100000001 ffff88011d09a510 ffff88011d09a5c4
Jun 2 01:55:13 node2 kernel: [ 1537.248462] RSP <ffff88011d48bc80>
Jun 2 01:55:13 node2 kernel: [ 1537.248791] ---[ end trace 9906e36b0046a369 ]---
Jun 2 01:58:03 node2 kernel: [ 1706.173845] send_kerrighed_signal: 12 (events/1) -> 24028 (dup_finder5.pl)
Jun 2 01:58:03 node2 kernel: [ 1706.416929] Check why the page is dirty...
Jun 2 01:58:06 node2 kernel: [ 1709.165540] send_kerrighed_signal: 12 (events/1) -> 24029 (dup_finder5.pl)
Jun 2 01:58:09 node2 kernel: [ 1712.157252] send_kerrighed_signal: 12 (events/1) -> 24030 (dup_finder5.pl)
Jun 2 01:59:32 node2 kernel: [ 1794.928413] send_kerrighed_signal: 13 (events/2) -> 24038 (dup_finder6.pl)
Jun 2 01:59:32 node2 kernel: [ 1795.147838] Check why the page is dirty...
Jun 2 01:59:33 node2 kernel: [ 1795.595241] CPU 1
Jun 2 01:59:33 node2 kernel: [ 1795.595546] Modules linked in: remote_cache_filter threshold_filter freq_limit_filter mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 2 01:59:33 node2 kernel: [ 1795.596345] Pid: 2005, comm: krgrpc Tainted: G D 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 2 01:59:33 node2 kernel: [ 1795.596857] RIP: 0010:[<ffffffff810b9342>] [<ffffffff810b9342>] __kmalloc+0xa8/0x106
Jun 2 01:59:33 node2 kernel: [ 1795.597407] RSP: 0018:ffff88011d4fbc40 EFLAGS: 00010002
Jun 2 01:59:33 node2 kernel: [ 1795.597680] RAX: 0000000000000000 RBX: 0400000000000016 RCX: ffffffff811709b4
Jun 2 01:59:33 node2 kernel: [ 1795.597960] RDX: ffff88002cc27e80 RSI: 00000000000080d0 RDI: 0000000000000001
Jun 2 01:59:33 node2 kernel: [ 1795.598238] RBP: ffff88011d4fbc70 R08: 0000000000000000 R09: 0000000000000000
Jun 2 01:59:33 node2 kernel: [ 1795.598517] R10: 0000000000000000 R11: ffff88011f18b0f0 R12: 0000000000000282
Jun 2 01:59:33 node2 kernel: [ 1795.598796] R13: ffffffff81761330 R14: 00000000000080d0 R15: 0000000000000056
Jun 2 01:59:33 node2 kernel: [ 1795.599077] FS: 0000000000000000(0000) GS:ffff88002cc1a000(0000) knlGS:0000000000000000
Jun 2 01:59:33 node2 kernel: [ 1795.599587] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Jun 2 01:59:33 node2 kernel: [ 1795.599864] CR2: 00007f521cc34004 CR3: 000000011c5c6000 CR4: 00000000000006e0
Jun 2 01:59:33 node2 kernel: [ 1795.600144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jun 2 01:59:33 node2 kernel: [ 1795.600421] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jun 2 01:59:33 node2 kernel: [ 1795.600701] Process krgrpc (pid: 2005, threadinfo ffff88011d4fa000, task ffff88011e330000)
Jun 2 01:59:33 node2 kernel: [ 1795.601484] 000000601d4fbc80 ffff88011c497c00 0000000000000001 ffff88011c4cacf0
Jun 2 01:59:33 node2 kernel: [ 1795.611171] RSP <ffff88011d4fbc40>
Jun 2 01:59:33 node2 kernel: [ 1795.611445] ---[ end trace 9906e36b0046a36a ]---
Jun 2 02:03:56 node2 kernel: [ 2058.797763] CPU 1
Jun 2 02:03:56 node2 kernel: [ 2058.798068] Modules linked in: remote_cache_filter threshold_filter freq_limit_filter mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 2 02:03:56 node2 kernel: [ 2058.798871] Pid: 2138, comm: bash Tainted: G D 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 2 02:03:56 node2 kernel: [ 2058.799382] RIP: 0010:[<ffffffff810b869c>] [<ffffffff810b869c>] kmem_cache_alloc+0x3f/0xbd
Jun 2 02:03:56 node2 kernel: [ 2058.799932] RSP: 0018:ffff88011c47bd08 EFLAGS: 00010002
Jun 2 02:03:56 node2 kernel: [ 2058.800209] RAX: 0000000000000000 RBX: 0000000000000292 RCX: ffffffff8113c25a
Jun 2 02:03:56 node2 kernel: [ 2058.800488] RDX: ffff88002cc27e80 RSI: 00000000000000d0 RDI: ffffffff81761330
Jun 2 02:03:56 node2 kernel: [ 2058.800767] RBP: ffff88011c47bd38 R08: 0000000000000000 R09: ffff88011c47bc48
Jun 2 02:03:56 node2 kernel: [ 2058.801045] R10: ffff88011c47be48 R11: ffff88011e7b72c0 R12: 0400000000000016
Jun 2 02:03:56 node2 kernel: [ 2058.801323] R13: ffffffff81761330 R14: 00000000000000d0 R15: 0000000000000060
Jun 2 02:03:56 node2 kernel: [ 2058.801601] FS: 00007f21a260a6e0(0000) GS:ffff88002cc1a000(0000) knlGS:0000000000000000
Jun 2 02:03:56 node2 kernel: [ 2058.802113] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jun 2 02:03:56 node2 kernel: [ 2058.802389] CR2: 000000000194b031 CR3: 000000011c44f000 CR4: 00000000000006e0
Jun 2 02:03:56 node2 kernel: [ 2058.802674] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jun 2 02:03:56 node2 kernel: [ 2058.802954] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jun 2 02:03:56 node2 kernel: [ 2058.803233] Process bash (pid: 2138, threadinfo ffff88011c47a000, task ffff88011d699060)
Jun 2 02:03:56 node2 kernel: [ 2058.804012] ffff88011c47bd48 ffff88011e48d200 ffff88011f4249c0 ffff88011d9dfe00
Jun 2 02:03:56 node2 kernel: [ 2058.813370] RSP <ffff88011c47bd08>
Jun 2 02:03:56 node2 kernel: [ 2058.813644] ---[ end trace 9906e36b0046a36b ]---

My questions are:

1 - Is it possible to use IPC Shared Memory with Kerrighed?
2 - Is it known any issue about using Perl with IPC Shared Memory inside a Kerrighed cluster?
3 - Is there any configuration related to usage of IPC?

If it is necessary to post the Perl code, please let me know. The program starts with a pre-defined number of children to be forked (see Parallel::ForkManager at http://search.cpan.org) and a child process lives until it's set of data was processed. The parent process will fork a new child until there are no more sets of data to be processed.

Thanks,
Alceu

Louis Rilling

2011-06-06 08:08:23 UTC

Permalink

Post by Alceu R. de Freitas Jr.
Hello everybody,
I finally got the cluster running and initiated some tests.
For that, I have two programs with the same funcionality and both uses fork() to parallelize the processing of data. The difference is that one of these programs use IPC Shared Memory so the children process can share state information between them.
I was able to execute the program that does not use IPC Shared Memory, but the second one generates errors and after some tries I even got a situation that I was not able to ssh to the node that started the program in port 2222. I had to restarted mannually both nodes.
Jun 2 01:49:50 node2 kernel: [ 1214.533098] send_kerrighed_signal: 12 (events/1) -> 14079 (dup_finder4.pl)
Jun 2 01:49:52 node2 kernel: [ 1216.527589] send_kerrighed_signal: 13 (events/2) -> 14289 (dup_finder4.pl)
Jun 2 01:49:55 node2 kernel: [ 1219.519281] send_kerrighed_signal: 13 (events/2) -> 14627 (dup_finder4.pl)
Jun 2 01:49:57 node2 kernel: [ 1221.513803] send_kerrighed_signal: 14 (events/3) -> 14854 (dup_finder4.pl)
Jun 2 01:50:00 node2 kernel: [ 1224.505438] send_kerrighed_signal: 13 (events/2) -> 15219 (dup_finder4.pl)
Jun 2 01:50:03 node2 kernel: [ 1227.497135] send_kerrighed_signal: 13 (events/2) -> 15610 (dup_finder4.pl)
Jun 2 01:50:06 node2 kernel: [ 1230.488857] send_kerrighed_signal: 14 (events/3) -> 16048 (dup_finder4.pl)
Jun 2 01:50:09 node2 kernel: [ 1233.480463] send_kerrighed_signal: 11 (events/0) -> 16526 (dup_finder4.pl)
Jun 2 01:50:12 node2 kernel: [ 1236.472225] send_kerrighed_signal: 13 (events/2) -> 17072 (dup_finder4.pl)
Jun 2 01:50:15 node2 kernel: [ 1239.463852] send_kerrighed_signal: 11 (events/0) -> 17728 (dup_finder4.pl)
Jun 2 01:50:18 node2 kernel: [ 1242.455662] send_kerrighed_signal: 14 (events/3) -> 18596 (dup_finder4.pl)
Jun 2 01:50:47 node2 kernel: [ 1271.377249] send_kerrighed_signal: 12 (events/1) -> 19046 (dup_finder4.pl)
Jun 2 01:50:50 node2 kernel: [ 1274.368923] send_kerrighed_signal: 11 (events/0) -> 19368 (dup_finder4.pl)
Jun 2 01:50:53 node2 kernel: [ 1277.360605] send_kerrighed_signal: 11 (events/0) -> 19703 (dup_finder4.pl)
Jun 2 01:50:56 node2 kernel: [ 1280.352291] send_kerrighed_signal: 11 (events/0) -> 20058 (dup_finder4.pl)
Jun 2 01:50:58 node2 kernel: [ 1282.346796] send_kerrighed_signal: 12 (events/1) -> 20304 (dup_finder4.pl)
Jun 2 01:51:01 node2 kernel: [ 1285.338450] send_kerrighed_signal: 11 (events/0) -> 20716 (dup_finder4.pl)
Jun 2 01:51:03 node2 kernel: [ 1287.333000] send_kerrighed_signal: 14 (events/3) -> 21003 (dup_finder4.pl)
Jun 2 01:51:06 node2 kernel: [ 1290.324676] send_kerrighed_signal: 13 (events/2) -> 21478 (dup_finder4.pl)
Jun 2 01:51:09 node2 kernel: [ 1293.316392] send_kerrighed_signal: 13 (events/2) -> 22025 (dup_finder4.pl)
Jun 2 01:51:12 node2 kernel: [ 1296.307997] send_kerrighed_signal: 11 (events/0) -> 22666 (dup_finder4.pl)
Jun 2 01:51:14 node2 kernel: [ 1298.304930] send_kerrighed_signal: 14 (events/3) -> 23220 (dup_finder4.pl)
Jun 2 01:52:19 node2 kernel: [ 1363.123475] send_kerrighed_signal: 12 (events/1) -> 23931 (dup_finder5.pl)

The lines above just log migration requests from the scheduler for your perl
processes.

Post by Alceu R. de Freitas Jr.
Jun 2 01:52:19 node2 kernel: [ 1363.414932] Check why the page is dirty...
Jun 2 01:52:22 node2 kernel: [ 1366.115167] send_kerrighed_signal: 12 (events/1) -> 23934 (dup_finder5.pl)
Jun 2 01:52:29 node2 kernel: [ 1373.095781] send_kerrighed_signal: 12 (events/1) -> 23932 (dup_finder5.pl)
Jun 2 01:55:13 node2 kernel: [ 1537.224632] CPU 2
Jun 2 01:55:13 node2 kernel: [ 1537.224937] Modules linked in: remote_cache_filter threshold_filter freq_limit_filter mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 2 01:55:13 node2 kernel: [ 1537.225738] Pid: 2106, comm: krgrpc Not tainted 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 2 01:55:13 node2 kernel: [ 1537.226250] RIP: 0010:[<ffffffff810b881d>] [<ffffffff810b881d>] kfree+0x59/0xb8
Jun 2 01:55:13 node2 kernel: [ 1537.226801] RSP: 0018:ffff88011d48bc80 EFLAGS: 00010246
Jun 2 01:55:13 node2 kernel: [ 1537.227078] RAX: 0200000000080000 RBX: ffff880100000001 RCX: ffff88011d09a510
Jun 2 01:55:13 node2 kernel: [ 1537.227357] RDX: ffffe20000000000 RSI: 0000000000000123 RDI: ffffe20004800000
Jun 2 01:55:13 node2 kernel: [ 1537.227635] RBP: ffff88011d48bca0 R08: ffff88011d48bca0 R09: ffff88011e1f0108
Jun 2 01:55:13 node2 kernel: [ 1537.227915] R10: ffff88011d0e4600 R11: ffff880000015000 R12: ffff880100000001
Jun 2 01:55:13 node2 kernel: [ 1537.228194] R13: ffffffff8113c174 R14: 0000000000000001 R15: ffff88011d9dfe00
Jun 2 01:55:13 node2 kernel: [ 1537.228475] FS: 0000000000000000(0000) GS:ffff88002cc34000(0000) knlGS:0000000000000000
Jun 2 01:55:13 node2 kernel: [ 1537.228986] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Jun 2 01:55:13 node2 kernel: [ 1537.229262] CR2: 00007f1dcdd0e010 CR3: 0000000001001000 CR4: 00000000000006e0
Jun 2 01:55:13 node2 kernel: [ 1537.229540] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jun 2 01:55:13 node2 kernel: [ 1537.229819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jun 2 01:55:13 node2 kernel: [ 1537.230099] Process krgrpc (pid: 2106, threadinfo ffff88011d48a000, task ffff88011d698000)
Jun 2 01:55:13 node2 kernel: [ 1537.236596] ffff88011d48bca0 ffff880100000001 ffff88011d09a510 ffff88011d09a5c4
Jun 2 01:55:13 node2 kernel: [ 1537.248462] RSP <ffff88011d48bc80>
Jun 2 01:55:13 node2 kernel: [ 1537.248791] ---[ end trace 9906e36b0046a369 ]---
Jun 2 01:58:03 node2 kernel: [ 1706.173845] send_kerrighed_signal: 12 (events/1) -> 24028 (dup_finder5.pl)
Jun 2 01:58:03 node2 kernel: [ 1706.416929] Check why the page is dirty...
Jun 2 01:58:06 node2 kernel: [ 1709.165540] send_kerrighed_signal: 12 (events/1) -> 24029 (dup_finder5.pl)
Jun 2 01:58:09 node2 kernel: [ 1712.157252] send_kerrighed_signal: 12 (events/1) -> 24030 (dup_finder5.pl)
Jun 2 01:59:32 node2 kernel: [ 1794.928413] send_kerrighed_signal: 13 (events/2) -> 24038 (dup_finder6.pl)
Jun 2 01:59:32 node2 kernel: [ 1795.147838] Check why the page is dirty...
Jun 2 01:59:33 node2 kernel: [ 1795.595241] CPU 1
Jun 2 01:59:33 node2 kernel: [ 1795.595546] Modules linked in: remote_cache_filter threshold_filter freq_limit_filter mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 2 01:59:33 node2 kernel: [ 1795.596345] Pid: 2005, comm: krgrpc Tainted: G D 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 2 01:59:33 node2 kernel: [ 1795.596857] RIP: 0010:[<ffffffff810b9342>] [<ffffffff810b9342>] __kmalloc+0xa8/0x106
Jun 2 01:59:33 node2 kernel: [ 1795.597407] RSP: 0018:ffff88011d4fbc40 EFLAGS: 00010002
Jun 2 01:59:33 node2 kernel: [ 1795.597680] RAX: 0000000000000000 RBX: 0400000000000016 RCX: ffffffff811709b4
Jun 2 01:59:33 node2 kernel: [ 1795.597960] RDX: ffff88002cc27e80 RSI: 00000000000080d0 RDI: 0000000000000001
Jun 2 01:59:33 node2 kernel: [ 1795.598238] RBP: ffff88011d4fbc70 R08: 0000000000000000 R09: 0000000000000000
Jun 2 01:59:33 node2 kernel: [ 1795.598517] R10: 0000000000000000 R11: ffff88011f18b0f0 R12: 0000000000000282
Jun 2 01:59:33 node2 kernel: [ 1795.598796] R13: ffffffff81761330 R14: 00000000000080d0 R15: 0000000000000056
Jun 2 01:59:33 node2 kernel: [ 1795.599077] FS: 0000000000000000(0000) GS:ffff88002cc1a000(0000) knlGS:0000000000000000
Jun 2 01:59:33 node2 kernel: [ 1795.599587] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Jun 2 01:59:33 node2 kernel: [ 1795.599864] CR2: 00007f521cc34004 CR3: 000000011c5c6000 CR4: 00000000000006e0
Jun 2 01:59:33 node2 kernel: [ 1795.600144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jun 2 01:59:33 node2 kernel: [ 1795.600421] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jun 2 01:59:33 node2 kernel: [ 1795.600701] Process krgrpc (pid: 2005, threadinfo ffff88011d4fa000, task ffff88011e330000)
Jun 2 01:59:33 node2 kernel: [ 1795.601484] 000000601d4fbc80 ffff88011c497c00 0000000000000001 ffff88011c4cacf0
Jun 2 01:59:33 node2 kernel: [ 1795.611171] RSP <ffff88011d4fbc40>
Jun 2 01:59:33 node2 kernel: [ 1795.611445] ---[ end trace 9906e36b0046a36a ]---
Jun 2 02:03:56 node2 kernel: [ 2058.797763] CPU 1
Jun 2 02:03:56 node2 kernel: [ 2058.798068] Modules linked in: remote_cache_filter threshold_filter freq_limit_filter mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 2 02:03:56 node2 kernel: [ 2058.798871] Pid: 2138, comm: bash Tainted: G D 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 2 02:03:56 node2 kernel: [ 2058.799382] RIP: 0010:[<ffffffff810b869c>] [<ffffffff810b869c>] kmem_cache_alloc+0x3f/0xbd
Jun 2 02:03:56 node2 kernel: [ 2058.799932] RSP: 0018:ffff88011c47bd08 EFLAGS: 00010002
Jun 2 02:03:56 node2 kernel: [ 2058.800209] RAX: 0000000000000000 RBX: 0000000000000292 RCX: ffffffff8113c25a
Jun 2 02:03:56 node2 kernel: [ 2058.800488] RDX: ffff88002cc27e80 RSI: 00000000000000d0 RDI: ffffffff81761330
Jun 2 02:03:56 node2 kernel: [ 2058.800767] RBP: ffff88011c47bd38 R08: 0000000000000000 R09: ffff88011c47bc48
Jun 2 02:03:56 node2 kernel: [ 2058.801045] R10: ffff88011c47be48 R11: ffff88011e7b72c0 R12: 0400000000000016
Jun 2 02:03:56 node2 kernel: [ 2058.801323] R13: ffffffff81761330 R14: 00000000000000d0 R15: 0000000000000060
Jun 2 02:03:56 node2 kernel: [ 2058.801601] FS: 00007f21a260a6e0(0000) GS:ffff88002cc1a000(0000) knlGS:0000000000000000
Jun 2 02:03:56 node2 kernel: [ 2058.802113] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jun 2 02:03:56 node2 kernel: [ 2058.802389] CR2: 000000000194b031 CR3: 000000011c44f000 CR4: 00000000000006e0
Jun 2 02:03:56 node2 kernel: [ 2058.802674] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jun 2 02:03:56 node2 kernel: [ 2058.802954] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jun 2 02:03:56 node2 kernel: [ 2058.803233] Process bash (pid: 2138, threadinfo ffff88011c47a000, task ffff88011d699060)
Jun 2 02:03:56 node2 kernel: [ 2058.804012] ffff88011c47bd48 ffff88011e48d200 ffff88011f4249c0 ffff88011d9dfe00
Jun 2 02:03:56 node2 kernel: [ 2058.813370] RSP <ffff88011c47bd08>
Jun 2 02:03:56 node2 kernel: [ 2058.813644] ---[ end trace 9906e36b0046a36b ]---

Unfortunately parts of the bug traces are missing. This looks like the kernel
memory allocator is misused/corrupted, but the (incomplete) traces don't show
who calls the memory allocator...

Could you check on the monitor if more output is available? Especially stack
backtraces would be useful.

Post by Alceu R. de Freitas Jr.
1 - Is it possible to use IPC Shared Memory with Kerrighed?

Yes.

Post by Alceu R. de Freitas Jr.
2 - Is it known any issue about using Perl with IPC Shared Memory inside a Kerrighed cluster?

Not that I am aware of. But there might be issues.

Post by Alceu R. de Freitas Jr.
3 - Is there any configuration related to usage of IPC?

No.

Post by Alceu R. de Freitas Jr.
If it is necessary to post the Perl code, please let me know. The program starts with a pre-defined number of children to be forked (see Parallel::ForkManager at http://search.cpan.org) and a child process lives until it's set of data was processed. The parent process will fork a new child until there are no more sets of data to be processed.

Posting the code could help reproducing the bug actually, and collect complete
traces ;). However, I can't tell you when time will be available to try
reproducing it.

Thanks,

Louis

Post by Alceu R. de Freitas Jr.
Thanks,
Alceu

--
Dr Louis Rilling Kerlabs
Skype: louis.rilling Batiment Germanium
Phone: (+33|0) 6 80 89 08 23 80 avenue des Buttes de Coesmes
http://www.kerlabs.com/ 35700 Rennes

Alceu Rodrigues de Freitas Junior

2011-06-12 21:07:42 UTC

Permalink

Hello Louis,

Post by Louis Rilling
Unfortunately parts of the bug traces are missing. This looks like the kernel
memory allocator is misused/corrupted, but the (incomplete) traces don't show
who calls the memory allocator...
Could you check on the monitor if more output is available? Especially stack
backtraces would be useful.

I'm putting the complete log messages, since node booting, at the end of
the e-mail, after my signature.

If it's not enough, I can get a screenshot from it.

Post by Louis Rilling
Posting the code could help reproducing the bug actually, and collect complete
traces ;). However, I can't tell you when time will be available to try
reproducing it.

I'm not sure that posting the code and the necessary database on an
e-mail will not bother other subscribers. I'll send you by e-mail the
complete set privately. There is not problem in sharing the code, I just
think is too large for here.

Regards,
Alceu

Jun 6 14:39:47 node2 kernel: imklog 3.18.6, log source = /proc/kmsg
started.
Jun 6 14:39:47 node2 rsyslogd: [origin software="rsyslogd"
swVersion="3.18.6" x-pid="1961" x-info="http://www.rsyslog.com"] restart
Jun 6 14:39:47 node2 kernel: [ 0.000000] Initializing cgroup subsys
cpuset
Jun 6 14:39:47 node2 kernel: [ 0.000000] Initializing cgroup subsys cpu
Jun 6 14:39:47 node2 kernel: [ 0.000000] Linux version
2.6.30-krg3.0.0-1 (***@debian) (gcc version 4.3.2 (Debian 4.3.2-1.1) )
#2 SMP Tue May 31 02:15:37 UTC 2011
Jun 6 14:39:47 node2 kernel: [ 0.000000] Command line: root=/dev/nfs
nfsroot=192.168.0.2:/nfsroot/kerrighed ip=dhcp rw session_id=1
autonodeid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 14:39:47 node2 kernel: [ 0.000000] KERNEL supported cpus:
Jun 6 14:39:47 node2 kernel: [ 0.000000] Intel GenuineIntel
Jun 6 14:39:47 node2 kernel: [ 0.000000] AMD AuthenticAMD
Jun 6 14:39:47 node2 kernel: [ 0.000000] Centaur CentaurHauls
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009fc00 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
000000000009fc00 - 00000000000a0000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
00000000000e4000 - 0000000000100000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 00000000df770000 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
00000000df770000 - 00000000df788000 (ACPI data)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
00000000df788000 - 00000000df7dc000 (ACPI NVS)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
00000000df7dc000 - 00000000e0000000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
00000000fee00000 - 00000000fee01000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
00000000ffe00000 - 0000000100000000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] BIOS-e820:
0000000100000000 - 0000000120000000 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] DMI 2.6 present.
Jun 6 14:39:47 node2 kernel: [ 0.000000] AMI BIOS detected: BIOS may
corrupt low RAM, working around it.
Jun 6 14:39:47 node2 kernel: [ 0.000000] last_pfn = 0x120000
max_arch_pfn = 0x100000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 0.000000] last_pfn = 0xdf770
max_arch_pfn = 0x100000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Scanning 0 areas for low
memory corruption
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified physical RAM map:
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 0000000000000000
- 0000000000010000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 0000000000010000
- 000000000009fc00 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 000000000009fc00
- 00000000000a0000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 00000000000e4000
- 0000000000100000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 0000000000100000
- 00000000df770000 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 00000000df770000
- 00000000df788000 (ACPI data)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 00000000df788000
- 00000000df7dc000 (ACPI NVS)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 00000000df7dc000
- 00000000e0000000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 00000000fee00000
- 00000000fee01000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 00000000ffe00000
- 0000000100000000 (reserved)
Jun 6 14:39:47 node2 kernel: [ 0.000000] modified: 0000000100000000
- 0000000120000000 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000df770000
Jun 6 14:39:47 node2 kernel: [ 0.000000] init_memory_mapping:
0000000100000000-0000000120000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: RSDP 00000000000fba20
00024 (v02 ACPIAM)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: XSDT 00000000df770100
00054 (v01 070710 XSDT1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: FACP 00000000df770290
000F4 (v03 070710 FACP1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: DSDT 00000000df7704a0
09463 (v01 A1590 A1590001 00000001 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: FACS 00000000df788000
00040
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: APIC 00000000df770390
000CC (v01 070710 APIC1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: MCFG 00000000df770460
0003C (v01 070710 OEMMCFG 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: OEMB 00000000df788040
00072 (v01 070710 OEMB1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: HPET 00000000df779910
00038 (v01 070710 OEMHPET 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: SSDT 00000000df7899f0
00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 0.000000] No NUMA configuration found
Jun 6 14:39:47 node2 kernel: [ 0.000000] Faking a node at
0000000000000000-0000000120000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Bootmem setup node 0
0000000000000000-0000000120000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] NODE_DATA
[0000000000015000 - 0000000000019fff]
Jun 6 14:39:47 node2 kernel: [ 0.000000] bootmap [000000000001a000
- 000000000003dfff] pages 24
Jun 6 14:39:47 node2 kernel: [ 0.000000] (7 early reservations) ==>
bootmem [0000000000 - 0120000000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #1 [0000006000 -
0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #2 [0001000000 -
00018dd198] TEXT DATA BSS ==> [0001000000 - 00018dd198]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #3 [000009f800 -
0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #4 [00018de000 -
00018de2ba] BRK ==> [00018de000 - 00018de2ba]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #5 [0000010000 -
0000014000] PGTABLE ==> [0000010000 - 0000014000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #6 [0000014000 -
0000015000] PGTABLE ==> [0000014000 - 0000015000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] found SMP MP-table at
[ffff8800000ff780] ff780
Jun 6 14:39:47 node2 kernel: [ 0.000000] Zone PFN ranges:
Jun 6 14:39:47 node2 kernel: [ 0.000000] DMA 0x00000010 ->
0x00001000
Jun 6 14:39:47 node2 kernel: [ 0.000000] DMA32 0x00001000 ->
0x00100000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Normal 0x00100000 ->
0x00120000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Movable zone start PFN for
each node
Jun 6 14:39:47 node2 kernel: [ 0.000000] early_node_map[3] active
PFN ranges
Jun 6 14:39:47 node2 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Jun 6 14:39:47 node2 kernel: [ 0.000000] 0: 0x00000100 -> 0x000df770
Jun 6 14:39:47 node2 kernel: [ 0.000000] 0: 0x00100000 -> 0x00120000
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x04] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x01] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x05] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x84] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x85] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07]
lapic_id[0x86] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08]
lapic_id[0x87] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x09]
lapic_id[0x88] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0a]
lapic_id[0x89] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0b]
lapic_id[0x8a] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0c]
lapic_id[0x8b] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0d]
lapic_id[0x8c] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0e]
lapic_id[0x8d] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0f]
lapic_id[0x8e] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x10]
lapic_id[0x8f] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x06]
address[0xfec00000] gsi_base[0])
Jun 6 14:39:47 node2 kernel: [ 0.000000] IOAPIC[0]: apic_id 6,
version 0, address 0xfec00000, GSI 0-23
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 high level)
Jun 6 14:39:47 node2 kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: HPET id: 0x8086a701
base: 0xfed00000
Jun 6 14:39:47 node2 kernel: [ 0.000000] SMP: Allowing 16 CPUs, 12
hotplug CPUs
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e4000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000e4000 - 0000000000100000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000df770000 - 00000000df788000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000df788000 - 00000000df7dc000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000df7dc000 - 00000000e0000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000e0000000 - 00000000fee00000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fee00000 - 00000000fee01000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fee01000 - 00000000ffe00000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000ffe00000 - 0000000100000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Allocating PCI resources
starting at e2000000 (gap: e0000000:1ee00000)
Jun 6 14:39:47 node2 kernel: [ 0.000000] NR_CPUS:64
nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
Jun 6 14:39:47 node2 kernel: [ 0.000000] PERCPU: Embedded 26 pages
at ffff88002cc00000, static data 74208 bytes
Jun 6 14:39:47 node2 kernel: [ 0.000000] Built 1 zonelists in Node
order, mobility grouping on. Total pages: 1025431
Jun 6 14:39:47 node2 kernel: [ 0.000000] Policy zone: Normal
Jun 6 14:39:47 node2 kernel: [ 0.000000] Kernel command line:
root=/dev/nfs nfsroot=192.168.0.2:/nfsroot/kerrighed ip=dhcp rw
session_id=1 autonodeid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 14:39:47 node2 kernel: [ 0.000000] Initializing CPU#0
Jun 6 14:39:47 node2 kernel: [ 0.000000] Experimental hierarchical
RCU implementation.
Jun 6 14:39:47 node2 kernel: [ 0.000000] Experimental hierarchical
RCU init done.
Jun 6 14:39:47 node2 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:536
Jun 6 14:39:47 node2 kernel: [ 0.000000] PID hash table entries:
4096 (order: 12, 32768 bytes)
Jun 6 14:39:47 node2 kernel: [ 0.000000] Extended CMOS year: 2000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Fast TSC calibration using PIT
Jun 6 14:39:47 node2 kernel: [ 0.000000] Detected 3211.417 MHz
processor.
Jun 6 14:39:47 node2 kernel: [ 48.708375] Console: colour VGA+ 80x25
Jun 6 14:39:47 node2 kernel: [ 48.708377] console [tty0] enabled
Jun 6 14:39:47 node2 kernel: [ 48.747480] Checking aperture...
Jun 6 14:39:47 node2 kernel: [ 48.752641] No AGP bridge found
Jun 6 14:39:47 node2 kernel: [ 48.752960] PCI-DMA: Using software
bounce buffering for IO (SWIOTLB)
Jun 6 14:39:47 node2 kernel: [ 48.761360] Placing 64MB software IO
TLB between ffff880020000000 - ffff880024000000
Jun 6 14:39:47 node2 kernel: [ 48.761875] software IO TLB at phys
0x20000000 - 0x24000000
Jun 6 14:39:47 node2 kernel: [ 48.790064] Memory: 4032304k/4718592k
available (4716k kernel code, 533508k absent, 152780k reserved, 2832k
data, 544k init)
Jun 6 14:39:47 node2 kernel: [ 48.790607] SLUB: Genslabs=14,
HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Jun 6 14:39:47 node2 kernel: [ 48.791236] HPET: 8 timers in total, 5
timers will be used for per-cpu timer
Jun 6 14:39:47 node2 kernel: [ 48.791518] Calibrating delay loop
(skipped), value calculated using timer frequency.. 6422.83 BogoMIPS
(lpj=3211417)
Jun 6 14:39:47 node2 kernel: [ 48.792300] Dentry cache hash table
entries: 524288 (order: 10, 4194304 bytes)
Jun 6 14:39:47 node2 kernel: [ 48.793617] Inode-cache hash table
entries: 262144 (order: 9, 2097152 bytes)
Jun 6 14:39:47 node2 kernel: [ 48.794264] Mount-cache hash table
entries: 256
Jun 6 14:39:47 node2 kernel: [ 48.794633] Initializing cgroup subsys ns
Jun 6 14:39:47 node2 kernel: [ 48.794909] Initializing cgroup subsys
cpuacct
Jun 6 14:39:47 node2 kernel: [ 48.795186] Initializing cgroup subsys
freezer
Jun 6 14:39:47 node2 kernel: [ 48.795551] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 48.795824] CPU: Processor Core ID: 0
Jun 6 14:39:47 node2 kernel: [ 48.796098] CPU: L1 I cache: 32K, L1 D
cache: 32K
Jun 6 14:39:47 node2 kernel: [ 48.796414] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 48.796686] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 48.796959] CPU 0/0x0 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 48.797242] CPU0: Thermal monitoring
enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 48.797519] CPU 0 MCA banks CMCI:2
CMCI:3 CMCI:5 CMCI:6
Jun 6 14:39:47 node2 kernel: [ 48.797972] using mwait in idle threads.
Jun 6 14:39:47 node2 kernel: [ 48.798264] ACPI: Core revision 20090320
Jun 6 14:39:47 node2 kernel: [ 48.831934] Setting APIC routing to flat
Jun 6 14:39:47 node2 kernel: [ 48.832532] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 6 14:39:47 node2 kernel: [ 48.842784] CPU0: Intel(R) Core(TM) i3
CPU 550 @ 3.20GHz stepping 05
Jun 6 14:39:47 node2 kernel: [ 48.944869] Booting processor 1 APIC
0x4 ip 0x6000
Jun 6 14:39:47 node2 kernel: [ 48.955525] Initializing CPU#1
Jun 6 14:39:47 node2 kernel: [ 49.015585] Calibrating delay using
timer specific routine.. 6422.05 BogoMIPS (lpj=3211026)
Jun 6 14:39:47 node2 kernel: [ 49.015592] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.015592] CPU: Processor Core ID: 2
Jun 6 14:39:47 node2 kernel: [ 49.015594] CPU: L1 I cache: 32K, L1 D
cache: 32K
Jun 6 14:39:47 node2 kernel: [ 49.015595] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 49.015596] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 49.015597] CPU 1/0x4 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 49.015605] CPU1: Thermal monitoring
enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 49.015608] CPU 1 MCA banks CMCI:2
CMCI:3 CMCI:5 SHD:6
Jun 6 14:39:47 node2 kernel: [ 49.016160] x86 PAT enabled: cpu 1, old
0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 49.016973] CPU1: Intel(R) Core(TM) i3
CPU 550 @ 3.20GHz stepping 05
Jun 6 14:39:47 node2 kernel: [ 49.026340] Skipping synchronization
checks as TSC is reliable.
Jun 6 14:39:47 node2 kernel: [ 49.026688] Booting processor 2 APIC
0x1 ip 0x6000
Jun 6 14:39:47 node2 kernel: [ 49.037176] Initializing CPU#2
Jun 6 14:39:47 node2 kernel: [ 49.097353] Calibrating delay using
timer specific routine.. 6422.05 BogoMIPS (lpj=3211025)
Jun 6 14:39:47 node2 kernel: [ 49.097360] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.097361] CPU: Processor Core ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.097363] CPU: L1 I cache: 32K, L1 D
cache: 32K
Jun 6 14:39:47 node2 kernel: [ 49.097365] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 49.097365] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 49.097367] CPU 2/0x1 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 49.097376] CPU2: Thermal monitoring
enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 49.097379] CPU 2 MCA banks SHD:2 SHD:3
SHD:5 SHD:6
Jun 6 14:39:47 node2 kernel: [ 49.098092] x86 PAT enabled: cpu 2, old
0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 49.099132] CPU2: Intel(R) Core(TM) i3
CPU 550 @ 3.20GHz stepping 05
Jun 6 14:39:47 node2 kernel: [ 49.102762] Skipping synchronization
checks as TSC is reliable.
Jun 6 14:39:47 node2 kernel: [ 49.103108] Booting processor 3 APIC
0x5 ip 0x6000
Jun 6 14:39:47 node2 kernel: [ 49.113598] Initializing CPU#3
Jun 6 14:39:47 node2 kernel: [ 49.174135] Calibrating delay using
timer specific routine.. 6422.05 BogoMIPS (lpj=3211025)
Jun 6 14:39:47 node2 kernel: [ 49.174141] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.174142] CPU: Processor Core ID: 2
Jun 6 14:39:47 node2 kernel: [ 49.174144] CPU: L1 I cache: 32K, L1 D
cache: 32K
Jun 6 14:39:47 node2 kernel: [ 49.174145] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 49.174146] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 49.174147] CPU 3/0x5 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 49.174155] CPU3: Thermal monitoring
enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 49.174157] CPU 3 MCA banks SHD:2 SHD:3
SHD:5 SHD:6
Jun 6 14:39:47 node2 kernel: [ 49.174912] x86 PAT enabled: cpu 3, old
0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 49.176014] CPU3: Intel(R) Core(TM) i3
CPU 550 @ 3.20GHz stepping 05
Jun 6 14:39:47 node2 kernel: [ 49.179634] Skipping synchronization
checks as TSC is reliable.
Jun 6 14:39:47 node2 kernel: [ 49.179923] Brought up 4 CPUs
Jun 6 14:39:47 node2 kernel: [ 49.180197] Total of 4 processors
activated (25688.98 BogoMIPS).
Jun 6 14:39:47 node2 kernel: [ 49.180691] khelper used greatest stack
depth: 5952 bytes left
Jun 6 14:39:47 node2 kernel: [ 49.181026] net_namespace: 1024 bytes
Jun 6 14:39:47 node2 kernel: [ 49.181466] Time: 14:39:42 Date: 06/06/11
Jun 6 14:39:47 node2 kernel: [ 49.181778] NET: Registered protocol
family 16
Jun 6 14:39:47 node2 kernel: [ 49.182308] ACPI: bus type pci registered
Jun 6 14:39:47 node2 kernel: [ 49.182657] PCI: MCFG configuration 0:
base f8000000 segment 0 buses 0 - 63
Jun 6 14:39:47 node2 kernel: [ 49.182939] PCI: Not using MMCONFIG.
Jun 6 14:39:47 node2 kernel: [ 49.183215] PCI: Using configuration
type 1 for base access
Jun 6 14:39:47 node2 kernel: [ 49.186805] bio: create slab <bio-0> at 0
Jun 6 14:39:47 node2 kernel: [ 49.197919] ACPI: Interpreter enabled
Jun 6 14:39:47 node2 kernel: [ 49.198197] ACPI: (supports S0 S1 S3 S4 S5)
Jun 6 14:39:47 node2 kernel: [ 49.198661] ACPI: Using IOAPIC for
interrupt routing
Jun 6 14:39:47 node2 kernel: [ 49.198986] PCI: MCFG configuration 0:
base f8000000 segment 0 buses 0 - 63
Jun 6 14:39:47 node2 kernel: [ 49.201781] PCI: MCFG area at f8000000
reserved in ACPI motherboard resources
Jun 6 14:39:47 node2 kernel: [ 49.203173] PCI: Using MMCONFIG at
f8000000 - fbffffff
Jun 6 14:39:47 node2 kernel: [ 49.211574] ACPI Warning
(tbutils-0246): Incorrect checksum in table [OEMB] - E7, should be E6
[20090320]
Jun 6 14:39:47 node2 kernel: [ 49.212269] ACPI: No dock devices found.
Jun 6 14:39:47 node2 kernel: [ 49.212759] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Jun 6 14:39:47 node2 kernel: [ 49.213114] pci 0000:00:01.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.213395] pci 0000:00:01.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.213764] pci 0000:00:1a.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.214046] pci 0000:00:1a.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.214381] pci 0000:00:1b.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.214662] pci 0000:00:1b.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.214977] pci 0000:00:1c.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.215259] pci 0000:00:1c.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.215577] pci 0000:00:1c.4: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.215858] pci 0000:00:1c.4: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.216217] pci 0000:00:1d.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.216497] pci 0000:00:1d.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.217323] pci 0000:02:00.0: PME#
supported from D1 D2 D3hot
Jun 6 14:39:47 node2 kernel: [ 49.217605] pci 0000:02:00.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.217990] pci 0000:04:01.0: PME#
supported from D0 D1 D2 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.218272] pci 0000:04:01.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.218581] pci 0000:00:1e.0:
transparent bridge
Jun 6 14:39:47 node2 kernel: [ 49.230667] ACPI: PCI Interrupt Link
[LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
Jun 6 14:39:47 node2 kernel: [ 49.231438] ACPI: PCI Interrupt Link
[LNKB] (IRQs *5)
Jun 6 14:39:47 node2 kernel: [ 49.231921] ACPI: PCI Interrupt Link
[LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
Jun 6 14:39:47 node2 kernel: [ 49.232687] ACPI: PCI Interrupt Link
[LNKD] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
Jun 6 14:39:47 node2 kernel: [ 49.233758] ACPI: PCI Interrupt Link
[LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
Jun 6 14:39:47 node2 kernel: [ 49.234828] ACPI: PCI Interrupt Link
[LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
Jun 6 14:39:47 node2 kernel: [ 49.235593] ACPI: PCI Interrupt Link
[LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
Jun 6 14:39:47 node2 kernel: [ 49.236360] ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
Jun 6 14:39:47 node2 kernel: [ 49.237199] SCSI subsystem initialized
Jun 6 14:39:47 node2 kernel: [ 49.237661] usbcore: registered new
interface driver usbfs
Jun 6 14:39:47 node2 kernel: [ 49.237961] usbcore: registered new
interface driver hub
Jun 6 14:39:47 node2 kernel: [ 49.238266] usbcore: registered new
device driver usb
Jun 6 14:39:47 node2 kernel: [ 49.238683] PCI: Using ACPI for IRQ routing
Jun 6 14:39:47 node2 kernel: [ 49.242026] hpet0: at MMIO 0xfed00000,
IRQs 2, 8, 24, 25, 26, 27, 28, 0
Jun 6 14:39:47 node2 kernel: [ 49.242628] hpet0: 8 comparators,
64-bit 14.318180 MHz counter
Jun 6 14:39:47 node2 kernel: [ 49.248941] pnp: PnP ACPI init
Jun 6 14:39:47 node2 kernel: [ 49.249231] ACPI: bus type pnp registered
Jun 6 14:39:47 node2 kernel: [ 49.252351] pnp: PnP ACPI: found 15 devices
Jun 6 14:39:47 node2 kernel: [ 49.252625] ACPI: ACPI bus type pnp
unregistered
Jun 6 14:39:47 node2 kernel: [ 49.252906] system 00:01: iomem range
0xfed14000-0xfed19fff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.253192] system 00:06: ioport range
0x290-0x29f has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.253474] system 00:07: ioport range
0x4d0-0x4d1 has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.253753] system 00:07: ioport range
0x800-0x87f has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254036] system 00:07: ioport range
0x500-0x57f has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254316] system 00:07: iomem range
0xfed1c000-0xfed1ffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254597] system 00:07: iomem range
0xfed20000-0xfed3ffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254878] system 00:07: iomem range
0xfed40000-0xfed8ffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.255166] system 00:0a: iomem range
0xffc00000-0xffdfffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.255449] system 00:0c: iomem range
0xfec00000-0xfec00fff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.255730] system 00:0c: iomem range
0xfee00000-0xfee00fff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.256015] system 00:0d: iomem range
0xf8000000-0xfbffffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.256294] system 00:0e: iomem range
0x0-0x9ffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.256574] system 00:0e: iomem range
0xc0000-0xcffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.256854] system 00:0e: iomem range
0xe0000-0xfffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.257139] system 00:0e: iomem range
0x100000-0xdfffffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.257654] system 00:0e: iomem range
0xfed90000-0xffffffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.262958] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
Jun 6 14:39:47 node2 kernel: [ 49.263238] pci 0000:00:01.0: IO
window: 0xc000-0xcfff
Jun 6 14:39:47 node2 kernel: [ 49.263514] pci 0000:00:01.0: MEM
window: 0xf6000000-0xf7dfffff
Jun 6 14:39:47 node2 kernel: [ 49.263794] pci 0000:00:01.0:
PREFETCH window: 0x000000e0000000-0x000000f3ffffff
Jun 6 14:39:47 node2 kernel: [ 49.264311] pci 0000:00:1c.0: PCI
bridge, secondary bus 0000:03
Jun 6 14:39:47 node2 kernel: [ 49.264589] pci 0000:00:1c.0: IO
window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.264868] pci 0000:00:1c.0: MEM
window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.265147] pci 0000:00:1c.0:
PREFETCH window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.265425] pci 0000:00:1c.4: PCI
bridge, secondary bus 0000:02
Jun 6 14:39:47 node2 kernel: [ 49.265705] pci 0000:00:1c.4: IO
window: 0xd000-0xdfff
Jun 6 14:39:47 node2 kernel: [ 49.265987] pci 0000:00:1c.4: MEM
window: 0xf7e00000-0xf7efffff
Jun 6 14:39:47 node2 kernel: [ 49.266269] pci 0000:00:1c.4:
PREFETCH window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.266549] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:04
Jun 6 14:39:47 node2 kernel: [ 49.266829] pci 0000:00:1e.0: IO
window: 0xe000-0xefff
Jun 6 14:39:47 node2 kernel: [ 49.267109] pci 0000:00:1e.0: MEM
window: 0xf7f00000-0xf7ffffff
Jun 6 14:39:47 node2 kernel: [ 49.267390] pci 0000:00:1e.0:
PREFETCH window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.267679] pci 0000:00:01.0: PCI INT A
-> GSI 16 (level, low) -> IRQ 16
Jun 6 14:39:47 node2 kernel: [ 49.267970] pci 0000:00:1c.0: PCI INT A
-> GSI 17 (level, low) -> IRQ 17
Jun 6 14:39:47 node2 kernel: [ 49.268255] pci 0000:00:1c.4: PCI INT A
-> GSI 17 (level, low) -> IRQ 17
Jun 6 14:39:47 node2 kernel: [ 49.268574] NET: Registered protocol
family 2
Jun 6 14:39:47 node2 kernel: [ 49.284978] IP route cache hash table
entries: 131072 (order: 8, 1048576 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.286116] TCP established hash table
entries: 524288 (order: 11, 8388608 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.288102] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.288562] TCP: Hash tables configured
(established 524288 bind 65536)
Jun 6 14:39:47 node2 kernel: [ 49.288845] TCP reno registered
Jun 6 14:39:47 node2 kernel: [ 49.292961] NET: Registered protocol
family 1
Jun 6 14:39:47 node2 kernel: [ 49.294357] Microcode Update Driver:
v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/***@public.gmane.org>, Peter Oruba
Jun 6 14:39:47 node2 kernel: [ 49.294874] Scanning for low memory
corruption every 60 seconds
Jun 6 14:39:47 node2 kernel: [ 49.295295] audit: initializing netlink
socket (disabled)
Jun 6 14:39:47 node2 kernel: [ 49.295579] type=2000
audit(1307371181.368:1): initialized
Jun 6 14:39:47 node2 kernel: [ 49.301343] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
Jun 6 14:39:47 node2 kernel: [ 49.303066] VFS: Disk quotas dquot_6.5.2
Jun 6 14:39:47 node2 kernel: [ 49.303385] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.304212] msgmni has been set to 7875
Jun 6 14:39:47 node2 kernel: [ 49.304757] alg: No test for stdrng (krng)
Jun 6 14:39:47 node2 kernel: [ 49.305096] Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 252)
Jun 6 14:39:47 node2 kernel: [ 49.305608] io scheduler noop registered
Jun 6 14:39:47 node2 kernel: [ 49.305885] io scheduler anticipatory
registered
Jun 6 14:39:47 node2 kernel: [ 49.306161] io scheduler deadline
registered
Jun 6 14:39:47 node2 kernel: [ 49.306474] io scheduler cfq registered
(default)
Jun 6 14:39:47 node2 kernel: [ 49.307272] pci_hotplug: PCI Hot Plug
PCI Core version: 0.5
Jun 6 14:39:47 node2 kernel: [ 49.307717] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 6 14:39:47 node2 kernel: [ 49.308236] ACPI: Power Button [PWRF]
Jun 6 14:39:47 node2 kernel: [ 49.308563] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 6 14:39:47 node2 kernel: [ 49.309078] ACPI: Power Button [PWRB]
Jun 6 14:39:47 node2 kernel: [ 49.310151] ACPI: SSDT 00000000df7880c0
01448 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 49.311089] ACPI: SSDT 00000000df789510
004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 49.312047] ACPI: CPU0 (power states:
C1[C1] C2[C2])
Jun 6 14:39:47 node2 kernel: [ 49.312453] processor ACPI_CPU:00:
registered as cooling_device0
Jun 6 14:39:47 node2 kernel: [ 49.312958] ACPI: CPU1 (power states:
C1[C1] C2[C2])
Jun 6 14:39:47 node2 kernel: [ 49.313360] processor ACPI_CPU:01:
registered as cooling_device1
Jun 6 14:39:47 node2 kernel: [ 49.319558] ACPI: CPU2 (power states:
C1[C1] C2[C2])
Jun 6 14:39:47 node2 kernel: [ 49.319964] processor ACPI_CPU:02:
registered as cooling_device2
Jun 6 14:39:47 node2 kernel: [ 49.320461] ACPI: CPU3 (power states:
C1[C1] C2[C2])
Jun 6 14:39:47 node2 kernel: [ 49.320867] processor ACPI_CPU:03:
registered as cooling_device3
Jun 6 14:39:47 node2 kernel: [ 49.325223] Non-volatile memory driver v1.3
Jun 6 14:39:47 node2 kernel: [ 49.325498] Linux agpgart interface v0.103
Jun 6 14:39:47 node2 kernel: [ 49.325828] [drm] Initialized drm 1.1.0
20060810
Jun 6 14:39:47 node2 kernel: [ 49.326127] Serial: 8250/16550 driver,
4 ports, IRQ sharing enabled
Jun 6 14:39:47 node2 kernel: [ 49.569183] serial8250: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
Jun 6 14:39:47 node2 kernel: [ 49.569774] 00:0b: ttyS0 at I/O 0x3f8
(irq = 4) is a 16550A
Jun 6 14:39:47 node2 kernel: [ 49.571023] brd: module loaded
Jun 6 14:39:47 node2 kernel: [ 49.571732] loop: module loaded
Jun 6 14:39:47 node2 kernel: [ 49.572062] Driver 'sd' needs updating
- please use bus_type methods
Jun 6 14:39:47 node2 kernel: [ 49.572362] Driver 'sr' needs updating
- please use bus_type methods
Jun 6 14:39:47 node2 kernel: [ 49.572742] ata_piix 0000:00:1f.2: PCI
INT D -> GSI 21 (level, low) -> IRQ 21
Jun 6 14:39:47 node2 kernel: [ 49.573023] ata_piix 0000:00:1f.2: MAP
[ P0 P2 P1 P3 ]
Jun 6 14:39:47 node2 kernel: [ 49.573538] scsi0 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.573887] scsi1 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.575345] ata1: SATA max UDMA/133 cmd
0xac00 ctl 0xa880 bmdma 0xa400 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.575628] ata2: SATA max UDMA/133 cmd
0xa800 ctl 0xa480 bmdma 0xa408 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.575916] work_for_cpu used greatest
stack depth: 5144 bytes left
Jun 6 14:39:47 node2 kernel: [ 49.576232] ata_piix 0000:00:1f.5: PCI
INT D -> GSI 21 (level, low) -> IRQ 21
Jun 6 14:39:47 node2 kernel: [ 49.576515] ata_piix 0000:00:1f.5: MAP
[ P0 -- P1 -- ]
Jun 6 14:39:47 node2 kernel: [ 49.577006] scsi2 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.577349] scsi3 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.578602] ata3: SATA max UDMA/133 cmd
0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.578886] ata4: SATA max UDMA/133 cmd
0xb800 ctl 0xb480 bmdma 0xb408 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.579275] Intel(R) PRO/1000 Network
Driver - version 7.3.21-k3-NAPI
Jun 6 14:39:47 node2 kernel: [ 49.579555] Copyright (c) 1999-2006
Intel Corporation.
Jun 6 14:39:47 node2 kernel: [ 49.579870] e100: Intel(R) PRO/100
Network Driver, 3.5.24-k2-NAPI
Jun 6 14:39:47 node2 kernel: [ 49.580157] e100: Copyright(c)
1999-2006 Intel Corporation
Jun 6 14:39:47 node2 kernel: [ 49.580478] sky2 driver version 1.22
Jun 6 14:39:47 node2 kernel: [ 49.580789] via-rhine.c:v1.10-LK1.4.3
2007-03-06 Written by Donald Becker
Jun 6 14:39:47 node2 kernel: [ 49.581077] via-rhine 0000:04:01.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 14:39:47 node2 kernel: [ 49.586935] eth0: VIA Rhine III at
0x1e800, 00:22:b0:61:00:9a, IRQ 16.
Jun 6 14:39:47 node2 kernel: [ 49.587927] eth0: MII PHY found at
address 1, status 0x786d advertising 05e1 Link 45e1.
Jun 6 14:39:47 node2 kernel: [ 49.588527] console [netcon0] enabled
Jun 6 14:39:47 node2 kernel: [ 49.588802] netconsole: network logging
started
Jun 6 14:39:47 node2 kernel: [ 49.589167] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
Jun 6 14:39:47 node2 kernel: [ 49.589473] ehci_hcd 0000:00:1a.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 14:39:47 node2 kernel: [ 49.589770] ehci_hcd 0000:00:1a.0: EHCI
Host Controller
Jun 6 14:39:47 node2 kernel: [ 49.590121] ehci_hcd 0000:00:1a.0: new
USB bus registered, assigned bus number 1
Jun 6 14:39:47 node2 kernel: [ 49.594534] ehci_hcd 0000:00:1a.0:
debug port 2
Jun 6 14:39:47 node2 kernel: [ 49.594822] ehci_hcd 0000:00:1a.0: irq
16, io mem 0xf5ffe000
Jun 6 14:39:47 node2 kernel: [ 49.603978] ehci_hcd 0000:00:1a.0: USB
2.0 started, EHCI 1.00
Jun 6 14:39:47 node2 kernel: [ 49.604285] usb usb1: New USB device
found, idVendor=1d6b, idProduct=0002
Jun 6 14:39:47 node2 kernel: [ 49.604567] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 14:39:47 node2 kernel: [ 49.605082] usb usb1: Product: EHCI
Host Controller
Jun 6 14:39:47 node2 kernel: [ 49.605359] usb usb1: Manufacturer:
Linux 2.6.30-krg3.0.0-1 ehci_hcd
Jun 6 14:39:47 node2 kernel: [ 49.605637] usb usb1: SerialNumber:
0000:00:1a.0
Jun 6 14:39:47 node2 kernel: [ 49.605957] usb usb1: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 49.606272] hub 1-0:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 49.606551] hub 1-0:1.0: 2 ports detected
Jun 6 14:39:47 node2 kernel: [ 49.606950] ehci_hcd 0000:00:1d.0: PCI
INT A -> GSI 23 (level, low) -> IRQ 23
Jun 6 14:39:47 node2 kernel: [ 49.607244] ehci_hcd 0000:00:1d.0: EHCI
Host Controller
Jun 6 14:39:47 node2 kernel: [ 49.607572] ehci_hcd 0000:00:1d.0: new
USB bus registered, assigned bus number 2
Jun 6 14:39:47 node2 kernel: [ 49.611969] ehci_hcd 0000:00:1d.0:
debug port 2
Jun 6 14:39:47 node2 kernel: [ 49.612256] ehci_hcd 0000:00:1d.0: irq
23, io mem 0xf5ffd000
Jun 6 14:39:47 node2 kernel: [ 49.621930] ehci_hcd 0000:00:1d.0: USB
2.0 started, EHCI 1.00
Jun 6 14:39:47 node2 kernel: [ 49.622229] usb usb2: New USB device
found, idVendor=1d6b, idProduct=0002
Jun 6 14:39:47 node2 kernel: [ 49.622508] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 14:39:47 node2 kernel: [ 49.623024] usb usb2: Product: EHCI
Host Controller
Jun 6 14:39:47 node2 kernel: [ 49.623305] usb usb2: Manufacturer:
Linux 2.6.30-krg3.0.0-1 ehci_hcd
Jun 6 14:39:47 node2 kernel: [ 49.623583] usb usb2: SerialNumber:
0000:00:1d.0
Jun 6 14:39:47 node2 kernel: [ 49.623897] usb usb2: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 49.624210] hub 2-0:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 49.624487] hub 2-0:1.0: 2 ports detected
Jun 6 14:39:47 node2 kernel: [ 49.624861] ohci_hcd: USB 1.1 'Open'
Host Controller (OHCI) Driver
Jun 6 14:39:47 node2 kernel: [ 49.625167] uhci_hcd: USB Universal
Host Controller Interface driver
Jun 6 14:39:47 node2 kernel: [ 49.625497] usbcore: registered new
interface driver usblp
Jun 6 14:39:47 node2 kernel: [ 49.625777] Initializing USB Mass
Storage driver...
Jun 6 14:39:47 node2 kernel: [ 49.626080] usbcore: registered new
interface driver usb-storage
Jun 6 14:39:47 node2 kernel: [ 49.626359] USB Mass Storage support
registered.
Jun 6 14:39:47 node2 kernel: [ 49.626659] usbcore: registered new
interface driver libusual
Jun 6 14:39:47 node2 kernel: [ 49.627023] PNP: No PS/2 controller
found. Probing ports directly.
Jun 6 14:39:47 node2 kernel: [ 49.629486] serio: i8042 KBD port at
0x60,0x64 irq 1
Jun 6 14:39:47 node2 kernel: [ 49.629765] serio: i8042 AUX port at
0x60,0x64 irq 12
Jun 6 14:39:47 node2 kernel: [ 49.630082] mice: PS/2 mouse device
common for all mice
Jun 6 14:39:47 node2 kernel: [ 49.630472] rtc_cmos 00:03: RTC can
wake from S4
Jun 6 14:39:47 node2 kernel: [ 49.630783] rtc_cmos 00:03: rtc core:
registered rtc_cmos as rtc0
Jun 6 14:39:47 node2 kernel: [ 49.631084] rtc0: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
Jun 6 14:39:47 node2 kernel: [ 49.631406] i801_smbus 0000:00:1f.3:
PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 6 14:39:47 node2 kernel: [ 49.632062] device-mapper: ioctl:
4.14.0-ioctl (2008-04-23) initialised: dm-devel-H+wXaHxf7aLQT0dZR+***@public.gmane.org
Jun 6 14:39:47 node2 kernel: [ 49.632848] cpuidle: using governor ladder
Jun 6 14:39:47 node2 kernel: [ 49.633529] cpuidle: using governor menu
Jun 6 14:39:47 node2 kernel: [ 49.634348] usbcore: registered new
interface driver hiddev
Jun 6 14:39:47 node2 kernel: [ 49.634647] usbcore: registered new
interface driver usbhid
Jun 6 14:39:47 node2 kernel: [ 49.634930] usbhid: v2.6:USB HID core
driver
Jun 6 14:39:47 node2 kernel: [ 49.635283] Advanced Linux Sound
Architecture Driver Version 1.0.20.
Jun 6 14:39:47 node2 kernel: [ 49.635751] HDA Intel 0000:00:1b.0: PCI
INT A -> GSI 22 (level, low) -> IRQ 22
Jun 6 14:39:47 node2 kernel: [ 49.670879] ALSA device list:
Jun 6 14:39:47 node2 kernel: [ 49.671152] #0: HDA Intel at
0xf5ff8000 irq 22
Jun 6 14:39:47 node2 kernel: [ 49.671441] Netfilter messages via
NETLINK v0.30.
Jun 6 14:39:47 node2 kernel: [ 49.671726] nf_conntrack version 0.5.0
(16384 buckets, 65536 max)
Jun 6 14:39:47 node2 kernel: [ 49.672305] ctnetlink v0.93:
registering with nfnetlink.
Jun 6 14:39:47 node2 kernel: [ 49.672904] ip_tables: (C) 2000-2006
Netfilter Core Team
Jun 6 14:39:47 node2 kernel: [ 49.673204] TCP cubic registered
Jun 6 14:39:47 node2 kernel: [ 49.673477] NET: Registered protocol
family 17
Jun 6 14:39:47 node2 kernel: [ 49.674023] RPC: Registered udp
transport module.
Jun 6 14:39:47 node2 kernel: [ 49.674298] RPC: Registered tcp
transport module.
Jun 6 14:39:47 node2 kernel: [ 49.674582] TIPC: Activated (version
1.7.6 compiled May 31 2011 02:14:31)
Jun 6 14:39:47 node2 kernel: [ 49.674988] NET: Registered protocol
family 30
Jun 6 14:39:47 node2 kernel: [ 49.675265] TIPC: Started in single
node mode
Jun 6 14:39:47 node2 kernel: [ 49.677230] registered taskstats version 1
Jun 6 14:39:47 node2 kernel: [ 49.677605] Magic number: 15:67:687
Jun 6 14:39:47 node2 kernel: [ 49.893920] ata3: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 49.907197] usb 1-1: new high speed USB
device using ehci_hcd and address 2
Jun 6 14:39:47 node2 kernel: [ 50.021252] usb 1-1: New USB device
found, idVendor=8087, idProduct=0020
Jun 6 14:39:47 node2 kernel: [ 50.021532] usb 1-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.021889] usb 1-1: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.022350] hub 1-1:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 50.022737] hub 1-1:1.0: 6 ports detected
Jun 6 14:39:47 node2 kernel: [ 50.125601] usb 2-1: new high speed USB
device using ehci_hcd and address 2
Jun 6 14:39:47 node2 kernel: [ 50.179633] eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1
Jun 6 14:39:47 node2 kernel: [ 50.239633] usb 2-1: New USB device
found, idVendor=8087, idProduct=0020
Jun 6 14:39:47 node2 kernel: [ 50.239912] usb 2-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.240294] usb 2-1: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.240961] hub 2-1:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 50.241377] hub 2-1:1.0: 8 ports detected
Jun 6 14:39:47 node2 kernel: [ 50.334081] ata1.00: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 50.334402] ata1.01: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 50.353378] ata1.00: ATA-8: SAMSUNG
HD502HJ, 1AJ10001, max UDMA/133
Jun 6 14:39:47 node2 kernel: [ 50.353658] ata1.00: 976773168 sectors,
multi 16: LBA48 NCQ (depth 0/32)
Jun 6 14:39:47 node2 kernel: [ 50.373259] ata1.00: configured for
UDMA/133
Jun 6 14:39:47 node2 kernel: [ 50.373682] scsi 0:0:0:0: Direct-Access
ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
Jun 6 14:39:47 node2 kernel: [ 50.374645] sd 0:0:0:0: Attached scsi
generic sg0 type 0
Jun 6 14:39:47 node2 kernel: [ 50.374965] sd 0:0:0:0: [sda] 976773168
512-byte hardware sectors: (500 GB/465 GiB)
Jun 6 14:39:47 node2 kernel: [ 50.375472] sd 0:0:0:0: [sda] Write
Protect is off
Jun 6 14:39:47 node2 kernel: [ 50.375757] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 14:39:47 node2 kernel: [ 50.376320] sda: sda1 sda2 sda3 < sda5
sda6 sda7 >
Jun 6 14:39:47 node2 kernel: [ 50.413849] sd 0:0:0:0: [sda] Attached
SCSI disk
Jun 6 14:39:47 node2 kernel: [ 50.515762] usb 2-1.1: new low speed
USB device using ehci_hcd and address 3
Jun 6 14:39:47 node2 kernel: [ 50.607358] usb 2-1.1: New USB device
found, idVendor=0d62, idProduct=a100
Jun 6 14:39:47 node2 kernel: [ 50.607638] usb 2-1.1: New USB device
strings: Mfr=2, Product=1, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.608131] usb 2-1.1: Product: USB
Optical Mouse
Jun 6 14:39:47 node2 kernel: [ 50.608419] usb 2-1.1: Manufacturer: Darfon
Jun 6 14:39:47 node2 kernel: [ 50.608806] usb 2-1.1: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.612808] input: Darfon USB Optical
Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
Jun 6 14:39:47 node2 kernel: [ 50.613585] generic-usb
0003:0D62:A100.0001: input,hidraw0: USB HID v1.10 Mouse [Darfon USB
Optical Mouse] on usb-0000:00:1d.0-1.1/input0
Jun 6 14:39:47 node2 kernel: [ 50.677311] usb 2-1.2: new low speed
USB device using ehci_hcd and address 4
Jun 6 14:39:47 node2 kernel: [ 50.768315] usb 2-1.2: New USB device
found, idVendor=04f3, idProduct=0103
Jun 6 14:39:47 node2 kernel: [ 50.768594] usb 2-1.2: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.769204] usb 2-1.2: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.773764] input: HID 04f3:0103 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3
Jun 6 14:39:47 node2 kernel: [ 50.774590] generic-usb
0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID
04f3:0103] on usb-0000:00:1d.0-1.2/input0
Jun 6 14:39:47 node2 kernel: [ 50.779700] input: HID 04f3:0103 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input4
Jun 6 14:39:47 node2 kernel: [ 50.780478] generic-usb
0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103]
on usb-0000:00:1d.0-1.2/input1
Jun 6 14:39:47 node2 kernel: [ 50.843857] usb 2-1.5: new low speed
USB device using ehci_hcd and address 5
Jun 6 14:39:47 node2 kernel: [ 50.967997] usb 2-1.5: New USB device
found, idVendor=051d, idProduct=0002
Jun 6 14:39:47 node2 kernel: [ 50.968277] usb 2-1.5: New USB device
strings: Mfr=3, Product=1, SerialNumber=2
Jun 6 14:39:47 node2 kernel: [ 50.968804] usb 2-1.5: Product:
Back-UPS ES 600N FW:876.Q1j.D USB FW:Q1j
Jun 6 14:39:47 node2 kernel: [ 50.969070] usb 2-1.5: Manufacturer: APC
Jun 6 14:39:47 node2 kernel: [ 50.969338] usb 2-1.5: SerialNumber:
5B1035T13167
Jun 6 14:39:47 node2 kernel: [ 50.969728] usb 2-1.5: configuration #1
chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 51.134024] ata2.00: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 51.134303] ata2.01: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 51.137147] ata2.00: ATAPI: TSSTcorp
CDDVDW SH-S223C, SB04, max UDMA/100
Jun 6 14:39:47 node2 kernel: [ 51.143115] ata2.00: configured for
UDMA/100
Jun 6 14:39:47 node2 kernel: [ 51.144745] scsi 1:0:0:0: CD-ROM
TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5
Jun 6 14:39:47 node2 kernel: [ 51.153252] sr0: scsi3-mmc drive:
32x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 6 14:39:47 node2 kernel: [ 51.153758] Uniform CD-ROM driver
Revision: 3.20
Jun 6 14:39:47 node2 kernel: [ 51.154614] sr 1:0:0:0: Attached scsi
generic sg1 type 5
Jun 6 14:39:47 node2 kernel: [ 51.177746] Sending DHCP requests ., OK
Jun 6 14:39:47 node2 kernel: [ 51.183719] IP-Config: Got DHCP answer
from 192.168.0.2, my address is 192.168.0.4
Jun 6 14:39:47 node2 kernel: [ 51.184283] Automatic setting of
kerrighed_node_id: 4
Jun 6 14:39:47 node2 kernel: [ 51.184545] IP-Config: Complete:
Jun 6 14:39:47 node2 kernel: [ 51.184583] device=eth0,
addr=192.168.0.4, mask=255.255.255.0, gw=192.168.0.2,
Jun 6 14:39:47 node2 kernel: [ 51.185277] host=node2,
domain=kerrighed.foo.bar, nis-domain=(none),
Jun 6 14:39:47 node2 kernel: [ 51.185576]
bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=/nfsroot/kerrighed
Jun 6 14:39:47 node2 kernel: [ 51.249621] generic-usb
0003:051D:0002.0004: hiddev96,hidraw3: USB HID v1.10 Device [APC
Back-UPS ES 600N FW:876.Q1j.D USB FW:Q1j] on usb-0000:00:1d.0-1.5/input0
Jun 6 14:39:47 node2 kernel: [ 51.469642] ata4: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 51.469948] md: Waiting for all devices
to be available before autodetect
Jun 6 14:39:47 node2 kernel: [ 51.470242] md: If you don't use raid,
use raid=noautodetect
Jun 6 14:39:47 node2 kernel: [ 51.470741] md: Autodetecting RAID arrays.
Jun 6 14:39:47 node2 kernel: [ 51.471063] md: Scanned 0 and added 0
devices.
Jun 6 14:39:47 node2 kernel: [ 51.471337] md: autorun ...
Jun 6 14:39:47 node2 kernel: [ 51.471610] md: ... autorun DONE.
Jun 6 14:39:47 node2 kernel: [ 51.471900] Looking up port of RPC
100003/2 on 192.168.0.2
Jun 6 14:39:47 node2 kernel: [ 51.473293] Looking up port of RPC
100005/1 on 192.168.0.2
Jun 6 14:39:47 node2 kernel: [ 51.476187] VFS: Mounted root (nfs
filesystem) on device 0:15.
Jun 6 14:39:47 node2 kernel: [ 51.476484] Kerrighed: stage 0
Jun 6 14:39:47 node2 kernel: [ 51.476756] Kerrighed session ID : 1
Jun 6 14:39:47 node2 kernel: [ 51.477030] Kerrighed node ID : 4
Jun 6 14:39:47 node2 kernel: [ 51.477302] Kerrighed min nodes : -1
Jun 6 14:39:47 node2 kernel: [ 51.477576] Kerrighed: stage 1
Jun 6 14:39:47 node2 kernel: [ 51.478033] Kerrighed: stage 2
Jun 6 14:39:47 node2 kernel: [ 51.478314] Init Kerrighed low-level
framework...
Jun 6 14:39:47 node2 kernel: [ 51.478594] Init kerrighed syscall
mechanism
Jun 6 14:39:47 node2 kernel: [ 51.478873] Kerrighed tools - init module
Jun 6 14:39:47 node2 kernel: [ 51.479633] khelper used greatest stack
depth: 4144 bytes left
Jun 6 14:39:47 node2 kernel: [ 51.480397] TIPC: Started in network mode
Jun 6 14:39:47 node2 kernel: [ 51.480686] TIPC: Own node address
<1.1.5>, network identity 1
Jun 6 14:39:47 node2 kernel: [ 51.480979] RPC initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.481341] Init Kerrighed low-level
framework (nodeid 4) : done
Jun 6 14:39:47 node2 kernel: [ 51.481620] Init Kerrighed distributed
services...
Jun 6 14:39:47 node2 kernel: [ 51.481898] KDDM initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.482264] KDDM set init
Jun 6 14:39:47 node2 kernel: [ 51.482617] KDDM set init : done
Jun 6 14:39:47 node2 kernel: [ 51.482946] KDDM initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.483224] KerMM initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.483508] KerMM initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.483783] DVFS initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.484065] FAF: initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.484343] FAF: initialisation : done
Jun 6 14:39:47 node2 kernel: [ 51.484620] DVFS initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.484893] KrgIPC initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.485258] Shm Server configured
Jun 6 14:39:47 node2 kernel: [ 51.485529] KrgIPC initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.485806] Proc initialisation: start
Jun 6 14:39:47 node2 kernel: [ 51.486162] Proc initialisation: done
Jun 6 14:39:47 node2 kernel: [ 51.486474] EPM initialisation: start
Jun 6 14:39:47 node2 kernel: [ 51.486815] EPM initialisation: done
Jun 6 14:39:47 node2 kernel: [ 51.487091] Init Kerrighed distributed
services: done
Jun 6 14:39:47 node2 kernel: [ 51.487391] scheduler initialization
succeeded!
Jun 6 14:39:47 node2 kernel: [ 51.487665] Kerrighed... loaded!
Jun 6 14:39:47 node2 kernel: [ 51.487965] Freeing unused kernel
memory: 544k freed
Jun 6 14:39:47 node2 kernel: [ 51.488318] Write protecting the kernel
read-only data: 6828k
Jun 6 14:39:47 node2 kernel: [ 51.624798] modprobe used greatest
stack depth: 3312 bytes left
Jun 6 14:39:47 node2 kernel: [ 51.962710] create_static_n used
greatest stack depth: 3288 bytes left
Jun 6 14:39:47 node2 kernel: [ 54.792307] rc used greatest stack
depth: 2824 bytes left
Jun 6 14:39:48 node2 kernel: [ 55.191262] Try to enable bearer on
eth0:<5>TIPC: Enabled bearer <eth:eth0>, discovery domain <1.1.0>,
priority 10
Jun 6 14:39:48 node2 kernel: [ 55.191831] ok
Jun 6 14:39:48 node2 kernel: [ 55.225373] kerrighed: [ADD] Setting up
new nodes 4 ...
Jun 6 14:39:48 node2 kernel: [ 55.225692] kerrighed: [ADD] Setting up
new nodes succeeded.
Jun 6 14:39:48 node2 kernel: [ 55.226192] Kerrighed is running on 1
nodes: 4
Jun 6 14:39:48 node2 kernel: [ 55.266344] successfully registered
scheduler_policy_type round_robin_balancer
Jun 6 14:39:48 node2 kernel: [ 55.293075] successfully registered
scheduler_policy_type mosix_load_balancer
Jun 6 14:40:22 node2 kernel: [ 89.277794] TIPC: Established link
<1.1.5:eth0-1.1.6:eth0> on network plane A
Jun 6 14:40:23 node2 kernel: [ 90.247019] kerrighed: [ADD] Adding
nodes 5 ...
Jun 6 14:40:23 node2 kernel: [ 90.247323] kerrighed: [ADD] Adding
nodes succeeded.
Jun 6 14:40:23 node2 kernel: [ 90.247607] kerrighed: [ADD] Setting up
new nodes 5 ...
Jun 6 14:40:23 node2 kernel: [ 90.266629] kerrighed: [ADD] Setting up
new nodes succeeded.
Jun 6 14:40:23 node2 kernel: [ 90.329300] Kerrighed is running on 2
nodes: 4-5
eid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 17:39:30 node3 kernel: [ 0.000000] KERNEL supported cpus:
Jun 6 17:39:30 node3 kernel: [ 0.000000] Intel GenuineIntel
Jun 6 17:39:30 node3 kernel: [ 0.000000] AMD AuthenticAMD
Jun 6 17:39:30 node3 kernel: [ 0.000000] Centaur CentaurHauls
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009fc00 (usable)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
000000000009fc00 - 00000000000a0000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000000e4000 - 0000000000100000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 00000000bff90000 (usable)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000bff90000 - 00000000bff9e000 (ACPI data)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000bff9e000 - 00000000bffd0000 (ACPI NVS)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000bffd0000 - 00000000bffde000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000bffe0000 - 00000000c0000000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000fee00000 - 00000000fee01000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] BIOS-e820:
00000000fff00000 - 0000000100000000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] DMI present.
Jun 6 17:39:30 node3 kernel: [ 0.000000] AMI BIOS detected: BIOS may
corrupt low RAM, working around it.
Jun 6 17:39:30 node3 kernel: [ 0.000000] last_pfn = 0xbff90
max_arch_pfn = 0x100000000
Jun 6 17:39:30 node3 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
Jun 6 17:39:30 node3 kernel: [ 0.000000] Scanning 0 areas for low
memory corruption
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified physical RAM map:
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 0000000000000000
- 0000000000010000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 0000000000010000
- 000000000009fc00 (usable)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 000000000009fc00
- 00000000000a0000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000000e4000
- 0000000000100000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 0000000000100000
- 00000000bff90000 (usable)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000bff90000
- 00000000bff9e000 (ACPI data)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000bff9e000
- 00000000bffd0000 (ACPI NVS)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000bffd0000
- 00000000bffde000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000bffe0000
- 00000000c0000000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000fee00000
- 00000000fee01000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] modified: 00000000fff00000
- 0000000100000000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000bff90000
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: RSDP 00000000000fbdf0
00014 (v00 ACPIAM)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: RSDT 00000000bff90000
0003C (v01 A_M_I_ OEMRSDT 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: FACP 00000000bff90200
00084 (v02 A_M_I_ OEMFACP 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: DSDT 00000000bff905c0
0783E (v01 A1126 A1126000 00000000 INTL 20060113)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: FACS 00000000bff9e000
00040
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: APIC 00000000bff90390
0006C (v01 A_M_I_ OEMAPIC 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: MCFG 00000000bff90400
0003C (v01 A_M_I_ OEMMCFG 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: OEMB 00000000bff9e040
00080 (v01 A_M_I_ AMI_OEM 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: HPET 00000000bff97e00
00038 (v01 A_M_I_ OEMHPET 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: GSCI 00000000bff9e0c0
02024 (v01 A_M_I_ GMCHSCI 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] No NUMA configuration found
Jun 6 17:39:30 node3 kernel: [ 0.000000] Faking a node at
0000000000000000-00000000bff90000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Bootmem setup node 0
0000000000000000-00000000bff90000
Jun 6 17:39:30 node3 kernel: [ 0.000000] NODE_DATA
[0000000000013000 - 0000000000017fff]
Jun 6 17:39:30 node3 kernel: [ 0.000000] bootmap [0000000000018000
- 000000000002fff7] pages 18
Jun 6 17:39:30 node3 kernel: [ 0.000000] (6 early reservations) ==>
bootmem [0000000000 - 00bff90000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #1 [0000006000 -
0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #2 [0001000000 -
00018dd198] TEXT DATA BSS ==> [0001000000 - 00018dd198]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #3 [000009e800 -
0000100000] BIOS reserved ==> [000009e800 - 0000100000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #4 [00018de000 -
00018de284] BRK ==> [00018de000 - 00018de284]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #5 [0000010000 -
0000013000] PGTABLE ==> [0000010000 - 0000013000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] found SMP MP-table at
[ffff8800000ff780] ff780
Jun 6 17:39:30 node3 kernel: [ 0.000000] Zone PFN ranges:
Jun 6 17:39:30 node3 kernel: [ 0.000000] DMA 0x00000010 ->
0x00001000
Jun 6 17:39:30 node3 kernel: [ 0.000000] DMA32 0x00001000 ->
0x00100000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Normal 0x00100000 ->
0x00100000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Movable zone start PFN for
each node
Jun 6 17:39:30 node3 kernel: [ 0.000000] early_node_map[2] active
PFN ranges
Jun 6 17:39:30 node3 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Jun 6 17:39:30 node3 kernel: [ 0.000000] 0: 0x00000100 -> 0x000bff90
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x01] enabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x82] disabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x83] disabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
Jun 6 17:39:30 node3 kernel: [ 0.000000] IOAPIC[0]: apic_id 2,
version 0, address 0xfec00000, GSI 0-23
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 high level)
Jun 6 17:39:30 node3 kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201
base: 0xfed00000
Jun 6 17:39:30 node3 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2
hotplug CPUs
Jun 6 17:39:30 node3 kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Jun 6 17:39:30 node3 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e4000
Jun 6 17:39:30 node3 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000e4000 - 0000000000100000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Allocating PCI resources
starting at c4000000 (gap: c0000000:3ee00000)
Jun 6 17:39:30 node3 kernel: [ 0.000000] NR_CPUS:64
nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
Jun 6 17:39:30 node3 kernel: [ 0.000000] PERCPU: Embedded 26 pages
at ffff8800018fb000, static data 74208 bytes
Jun 6 17:39:30 node3 kernel: [ 0.000000] Built 1 zonelists in Node
order, mobility grouping on. Total pages: 772281
Jun 6 17:39:30 node3 kernel: [ 0.000000] Policy zone: DMA32
Jun 6 17:39:30 node3 kernel: [ 0.000000] Kernel command line:
root=/dev/nfs nfsroot=192.168.0.2:/nfsroot/kerrighed ip=dhcp rw
session_id=1 autonodeid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 17:39:30 node3 kernel: [ 0.000000] Initializing CPU#0
Jun 6 17:39:30 node3 kernel: [ 0.000000] Experimental hierarchical
RCU implementation.
Jun 6 17:39:30 node3 kernel: [ 0.000000] Experimental hierarchical
RCU init done.
Jun 6 17:39:30 node3 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:440
Jun 6 17:39:30 node3 kernel: [ 0.000000] PID hash table entries:
4096 (order: 12, 32768 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.000000] Fast TSC calibration using PIT
Jun 6 17:39:30 node3 kernel: [ 0.000000] Detected 2199.912 MHz
processor.
Jun 6 17:39:30 node3 kernel: [ 0.000999] Console: colour VGA+ 80x25
Jun 6 17:39:30 node3 kernel: [ 0.000999] console [tty0] enabled
Jun 6 17:39:30 node3 kernel: [ 0.000999] Checking aperture...
Jun 6 17:39:30 node3 kernel: [ 0.000999] No AGP bridge found
Jun 6 17:39:30 node3 kernel: [ 0.000999] Memory: 3079748k/3145280k
available (4716k kernel code, 452k absent, 65080k reserved, 2832k data,
544k init)
Jun 6 17:39:30 node3 kernel: [ 0.000999] SLUB: Genslabs=14,
HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jun 6 17:39:30 node3 kernel: [ 0.000999] HPET: 3 timers in total, 0
timers will be used for per-cpu timer
Jun 6 17:39:30 node3 kernel: [ 0.000999] Calibrating delay loop
(skipped), value calculated using timer frequency.. 4399.82 BogoMIPS
(lpj=2199912)
Jun 6 17:39:30 node3 kernel: [ 0.001191] Dentry cache hash table
entries: 524288 (order: 10, 4194304 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.004901] Inode-cache hash table
entries: 262144 (order: 9, 2097152 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.006795] Mount-cache hash table
entries: 256
Jun 6 17:39:30 node3 kernel: [ 0.007180] Initializing cgroup subsys ns
Jun 6 17:39:30 node3 kernel: [ 0.007421] Initializing cgroup subsys
cpuacct
Jun 6 17:39:30 node3 kernel: [ 0.007660] Initializing cgroup subsys
freezer
Jun 6 17:39:30 node3 kernel: [ 0.007917] CPU: L1 I cache: 32K, L1 D
cache: 32K
Jun 6 17:39:30 node3 kernel: [ 0.008237] CPU: L2 cache: 1024K
Jun 6 17:39:30 node3 kernel: [ 0.008475] CPU 0/0x0 -> Node 0
Jun 6 17:39:30 node3 kernel: [ 0.008711] CPU: Physical Processor ID: 0
Jun 6 17:39:30 node3 kernel: [ 0.008948] CPU: Processor Core ID: 0
Jun 6 17:39:30 node3 kernel: [ 0.009006] CPU0: Thermal monitoring
enabled (TM2)
Jun 6 17:39:30 node3 kernel: [ 0.009248] using mwait in idle threads.
Jun 6 17:39:30 node3 kernel: [ 0.009507] ACPI: Core revision 20090320
Jun 6 17:39:30 node3 kernel: [ 0.020069] Setting APIC routing to flat
Jun 6 17:39:30 node3 kernel: [ 0.020612] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 6 17:39:30 node3 kernel: [ 0.030861] CPU0: Intel(R) Pentium(R)
Dual CPU E2200 @ 2.20GHz stepping 0d
Jun 6 17:39:30 node3 kernel: [ 0.031995] Booting processor 1 APIC
0x1 ip 0x6000
Jun 6 17:39:30 node3 kernel: [ 0.000999] Initializing CPU#1
Jun 6 17:39:30 node3 kernel: [ 0.000999] Calibrating delay using
timer specific routine.. 4399.69 BogoMIPS (lpj=2199846)
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: L1 I cache: 32K, L1 D
cache: 32K
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: L2 cache: 1024K
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU 1/0x1 -> Node 0
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: Physical Processor ID: 0
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: Processor Core ID: 1
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU1: Thermal monitoring
enabled (TM2)
Jun 6 17:39:30 node3 kernel: [ 0.000999] x86 PAT enabled: cpu 1, old
0x7040600070406, new 0x7010600070106
Jun 6 17:39:30 node3 kernel: [ 0.103121] CPU1: Intel(R) Pentium(R)
Dual CPU E2200 @ 2.20GHz stepping 0d
Jun 6 17:39:30 node3 kernel: [ 0.104268] checking TSC
synchronization [CPU#0 -> CPU#1]: passed.
Jun 6 17:39:30 node3 kernel: [ 0.105003] Brought up 2 CPUs
Jun 6 17:39:30 node3 kernel: [ 0.105240] Total of 2 processors
activated (8799.51 BogoMIPS).
Jun 6 17:39:30 node3 kernel: [ 0.105572] khelper used greatest stack
depth: 5872 bytes left
Jun 6 17:39:30 node3 kernel: [ 0.106057] net_namespace: 1024 bytes
Jun 6 17:39:30 node3 kernel: [ 0.106332] Time: 17:39:21 Date: 06/06/11
Jun 6 17:39:30 node3 kernel: [ 0.106414] NET: Registered protocol
family 16
Jun 6 17:39:30 node3 kernel: [ 0.107007] ACPI: bus type pci registered
Jun 6 17:39:30 node3 kernel: [ 0.107247] PCI: MCFG configuration 0:
base f0000000 segment 0 buses 0 - 63
Jun 6 17:39:30 node3 kernel: [ 0.107994] PCI: Not using MMCONFIG.
Jun 6 17:39:30 node3 kernel: [ 0.108229] PCI: Using configuration
type 1 for base access
Jun 6 17:39:30 node3 kernel: [ 0.115083] bio: create slab <bio-0> at 0
Jun 6 17:39:30 node3 kernel: [ 0.124600] ACPI: Interpreter enabled
Jun 6 17:39:30 node3 kernel: [ 0.124840] ACPI: (supports S0 S1 S3 S4 S5)
Jun 6 17:39:30 node3 kernel: [ 0.125217] ACPI: Using IOAPIC for
interrupt routing
Jun 6 17:39:30 node3 kernel: [ 0.125513] PCI: MCFG configuration 0:
base f0000000 segment 0 buses 0 - 63
Jun 6 17:39:30 node3 kernel: [ 0.128210] PCI: MCFG area at f0000000
reserved in ACPI motherboard resources
Jun 6 17:39:30 node3 kernel: [ 0.129810] PCI: Using MMCONFIG at
f0000000 - f3ffffff
Jun 6 17:39:30 node3 kernel: [ 0.137108] ACPI Warning
(tbutils-0246): Incorrect checksum in table [OEMB] - 95, should be 94
[20090320]
Jun 6 17:39:30 node3 kernel: [ 0.139188] ACPI: No dock devices found.
Jun 6 17:39:30 node3 kernel: [ 0.139492] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Jun 6 17:39:30 node3 kernel: [ 0.140055] pci 0000:00:01.0: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.140296] pci 0000:00:01.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.140630] pci 0000:00:1b.0: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.140982] pci 0000:00:1b.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.141271] pci 0000:00:1c.0: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.141513] pci 0000:00:1c.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.142008] pci 0000:00:1c.1: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.142250] pci 0000:00:1c.1: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.142765] pci 0000:00:1d.7: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.142982] pci 0000:00:1d.7: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.143332] pci 0000:00:1f.0: quirk:
region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Jun 6 17:39:30 node3 kernel: [ 0.143779] pci 0000:00:1f.0: quirk:
region 0480-04bf claimed by ICH6 GPIO
Jun 6 17:39:30 node3 kernel: [ 0.143981] pci 0000:00:1f.0: ICH7 LPC
Generic IO decode 1 PIO at 0294 (mask 0003)
Jun 6 17:39:30 node3 kernel: [ 0.144575] pci 0000:00:1f.2: PME#
supported from D3hot
Jun 6 17:39:30 node3 kernel: [ 0.144816] pci 0000:00:1f.2: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.145324] pci 0000:02:00.0: PME#
supported from D0 D1 D2 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.145567] pci 0000:02:00.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.146062] pci 0000:00:1e.0:
transparent bridge
Jun 6 17:39:30 node3 kernel: [ 0.156324] ACPI: PCI Interrupt Link
[LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.157417] ACPI: PCI Interrupt Link
[LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.158099] ACPI: PCI Interrupt Link
[LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.158794] ACPI: PCI Interrupt Link
[LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.159527] ACPI: PCI Interrupt Link
[LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 6 17:39:30 node3 kernel: [ 0.160357] ACPI: PCI Interrupt Link
[LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 6 17:39:30 node3 kernel: [ 0.161355] ACPI: PCI Interrupt Link
[LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 6 17:39:30 node3 kernel: [ 0.162356] ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.163055] SCSI subsystem initialized
Jun 6 17:39:30 node3 kernel: [ 0.163290] usbcore: registered new
interface driver usbfs
Jun 6 17:39:30 node3 kernel: [ 0.163996] usbcore: registered new
interface driver hub
Jun 6 17:39:30 node3 kernel: [ 0.164231] usbcore: registered new
device driver usb
Jun 6 17:39:30 node3 kernel: [ 0.164231] PCI: Using ACPI for IRQ routing
Jun 6 17:39:30 node3 kernel: [ 0.167045] hpet0: at MMIO 0xfed00000,
IRQs 2, 8, 0
Jun 6 17:39:30 node3 kernel: [ 0.167411] hpet0: 3 comparators,
64-bit 14.318180 MHz counter
Jun 6 17:39:30 node3 kernel: [ 0.174016] pnp: PnP ACPI init
Jun 6 17:39:30 node3 kernel: [ 0.174273] ACPI: bus type pnp registered
Jun 6 17:39:30 node3 kernel: [ 0.177876] pnp: PnP ACPI: found 15 devices
Jun 6 17:39:30 node3 kernel: [ 0.178121] ACPI: ACPI bus type pnp
unregistered
Jun 6 17:39:30 node3 kernel: [ 0.178369] system 00:01: iomem range
0xfed14000-0xfed19fff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.178617] system 00:06: ioport range
0x290-0x297 has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.178862] system 00:07: ioport range
0x4d0-0x4d1 has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179109] system 00:07: ioport range
0x800-0x87f has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179349] system 00:07: ioport range
0x480-0x4bf has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179590] system 00:07: iomem range
0xfed1c000-0xfed1ffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179833] system 00:07: iomem range
0xfed20000-0xfed8ffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180081] system 00:0a: iomem range
0xffc00000-0xffefffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180326] system 00:0b: iomem range
0xfec00000-0xfec00fff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180567] system 00:0b: iomem range
0xfee00000-0xfee00fff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180810] system 00:0d: iomem range
0xf0000000-0xf3ffffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.181057] system 00:0e: iomem range
0x0-0x9ffff could not be reserved
Jun 6 17:39:30 node3 kernel: [ 0.181297] system 00:0e: iomem range
0xc0000-0xcffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.181538] system 00:0e: iomem range
0xe0000-0xfffff could not be reserved
Jun 6 17:39:30 node3 kernel: [ 0.181779] system 00:0e: iomem range
0x100000-0xbfffffff could not be reserved
Jun 6 17:39:30 node3 kernel: [ 0.187250] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
Jun 6 17:39:30 node3 kernel: [ 0.187491] pci 0000:00:01.0: IO
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.187732] pci 0000:00:01.0: MEM
window: 0xfc000000-0xfeafffff
Jun 6 17:39:30 node3 kernel: [ 0.187974] pci 0000:00:01.0:
PREFETCH window: 0x000000e0000000-0x000000efffffff
Jun 6 17:39:30 node3 kernel: [ 0.188428] pci 0000:00:1c.0: PCI
bridge, secondary bus 0000:03
Jun 6 17:39:30 node3 kernel: [ 0.188666] pci 0000:00:1c.0: IO
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.188905] pci 0000:00:1c.0: MEM
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.189145] pci 0000:00:1c.0:
PREFETCH window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.189388] pci 0000:00:1c.1: PCI
bridge, secondary bus 0000:02
Jun 6 17:39:30 node3 kernel: [ 0.189627] pci 0000:00:1c.1: IO
window: 0xe000-0xefff
Jun 6 17:39:30 node3 kernel: [ 0.189867] pci 0000:00:1c.1: MEM
window: 0xfeb00000-0xfebfffff
Jun 6 17:39:30 node3 kernel: [ 0.190113] pci 0000:00:1c.1:
PREFETCH window: 0x000000faf00000-0x000000faffffff
Jun 6 17:39:30 node3 kernel: [ 0.190562] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:04
Jun 6 17:39:30 node3 kernel: [ 0.190803] pci 0000:00:1e.0: IO
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.191048] pci 0000:00:1e.0: MEM
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.191290] pci 0000:00:1e.0:
PREFETCH window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.191548] pci 0000:00:01.0: PCI INT A
-> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.191798] pci 0000:00:1c.0: PCI INT A
-> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.192057] pci 0000:00:1c.1: PCI INT B
-> GSI 17 (level, low) -> IRQ 17
Jun 6 17:39:30 node3 kernel: [ 0.192358] NET: Registered protocol
family 2
Jun 6 17:39:30 node3 kernel: [ 0.200328] IP route cache hash table
entries: 131072 (order: 8, 1048576 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.202199] TCP established hash table
entries: 524288 (order: 11, 8388608 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.209298] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.210359] TCP: Hash tables configured
(established 524288 bind 65536)
Jun 6 17:39:30 node3 kernel: [ 0.210605] TCP reno registered
Jun 6 17:39:30 node3 kernel: [ 0.213287] NET: Registered protocol
family 1
Jun 6 17:39:30 node3 kernel: [ 0.214761] Microcode Update Driver:
v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/***@public.gmane.org>, Peter Oruba
Jun 6 17:39:30 node3 kernel: [ 0.215243] Scanning for low memory
corruption every 60 seconds
Jun 6 17:39:30 node3 kernel: [ 0.215723] audit: initializing netlink
socket (disabled)
Jun 6 17:39:30 node3 kernel: [ 0.215973] type=2000
audit(1307381961.215:1): initialized
Jun 6 17:39:30 node3 kernel: [ 0.223626] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
Jun 6 17:39:30 node3 kernel: [ 0.226411] VFS: Disk quotas dquot_6.5.2
Jun 6 17:39:30 node3 kernel: [ 0.226739] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.227956] msgmni has been set to 6015
Jun 6 17:39:30 node3 kernel: [ 0.228633] alg: No test for stdrng (krng)
Jun 6 17:39:30 node3 kernel: [ 0.228986] Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 252)
Jun 6 17:39:30 node3 kernel: [ 0.229449] io scheduler noop registered
Jun 6 17:39:30 node3 kernel: [ 0.229689] io scheduler anticipatory
registered
Jun 6 17:39:30 node3 kernel: [ 0.229928] io scheduler deadline
registered
Jun 6 17:39:30 node3 kernel: [ 0.230230] io scheduler cfq registered
(default)
Jun 6 17:39:30 node3 kernel: [ 0.231434] pci_hotplug: PCI Hot Plug
PCI Core version: 0.5
Jun 6 17:39:30 node3 kernel: [ 0.231943] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 6 17:39:30 node3 kernel: [ 0.232396] ACPI: Power Button [PWRF]
Jun 6 17:39:30 node3 kernel: [ 0.232717] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 6 17:39:30 node3 kernel: [ 0.233168] ACPI: Power Button [PWRB]
Jun 6 17:39:30 node3 kernel: [ 0.233873] ACPI: SSDT 00000000bffa00f0
00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
Jun 6 17:39:30 node3 kernel: [ 0.234689] processor ACPI_CPU:00:
registered as cooling_device0
Jun 6 17:39:30 node3 kernel: [ 0.235222] ACPI: SSDT 00000000bffa0310
00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
Jun 6 17:39:30 node3 kernel: [ 0.236015] processor ACPI_CPU:01:
registered as cooling_device1
Jun 6 17:39:30 node3 kernel: [ 0.241586] Non-volatile memory driver v1.3
Jun 6 17:39:30 node3 kernel: [ 0.241828] Linux agpgart interface v0.103
Jun 6 17:39:30 node3 kernel: [ 0.242252] [drm] Initialized drm 1.1.0
20060810
Jun 6 17:39:30 node3 kernel: [ 0.242532] Serial: 8250/16550 driver,
4 ports, IRQ sharing enabled
Jun 6 17:39:30 node3 kernel: [ 0.488783] serial8250: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
Jun 6 17:39:30 node3 kernel: [ 0.489505] 00:0c: ttyS0 at I/O 0x3f8
(irq = 4) is a 16550A
Jun 6 17:39:30 node3 kernel: [ 0.491383] brd: module loaded
Jun 6 17:39:30 node3 kernel: [ 0.492433] loop: module loaded
Jun 6 17:39:30 node3 kernel: [ 0.492819] Driver 'sd' needs updating
- please use bus_type methods
Jun 6 17:39:30 node3 kernel: [ 0.493091] Driver 'sr' needs updating
- please use bus_type methods
Jun 6 17:39:30 node3 kernel: [ 0.493513] ata_piix 0000:00:1f.1: PCI
INT A -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:39:30 node3 kernel: [ 0.493886] scsi0 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.494255] scsi1 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.496010] ata1: PATA max UDMA/100 cmd
0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Jun 6 17:39:30 node3 kernel: [ 0.496252] ata2: PATA max UDMA/100 cmd
0x170 ctl 0x376 bmdma 0xffa8 irq 15
Jun 6 17:39:30 node3 kernel: [ 0.496502] work_for_cpu used greatest
stack depth: 5144 bytes left
Jun 6 17:39:30 node3 kernel: [ 0.496918] ata_piix 0000:00:1f.2: PCI
INT B -> GSI 19 (level, low) -> IRQ 19
Jun 6 17:39:30 node3 kernel: [ 0.497162] ata_piix 0000:00:1f.2: MAP
[ P0 P2 P1 P3 ]
Jun 6 17:39:30 node3 kernel: [ 0.497617] scsi2 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.497970] scsi3 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.499695] ata3: SATA max UDMA/133 cmd
0xd400 ctl 0xd080 bmdma 0xc880 irq 19
Jun 6 17:39:30 node3 kernel: [ 0.499939] ata4: SATA max UDMA/133 cmd
0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
Jun 6 17:39:30 node3 kernel: [ 0.500445] Intel(R) PRO/1000 Network
Driver - version 7.3.21-k3-NAPI
Jun 6 17:39:30 node3 kernel: [ 0.500688] Copyright (c) 1999-2006
Intel Corporation.
Jun 6 17:39:30 node3 kernel: [ 0.501017] e100: Intel(R) PRO/100
Network Driver, 3.5.24-k2-NAPI
Jun 6 17:39:30 node3 kernel: [ 0.501257] e100: Copyright(c)
1999-2006 Intel Corporation
Jun 6 17:39:30 node3 kernel: [ 0.501565] sky2 driver version 1.22
Jun 6 17:39:30 node3 kernel: [ 0.501979] r8169 Gigabit Ethernet
driver 2.3LK-NAPI loaded
Jun 6 17:39:30 node3 kernel: [ 0.502231] r8169 0000:02:00.0: PCI INT
A -> GSI 17 (level, low) -> IRQ 17
Jun 6 17:39:30 node3 kernel: [ 0.502816] eth0: RTL8102e at
0xffffc2000066c000, 20:cf:30:a5:ec:80, XID 24c00000 IRQ 27
Jun 6 17:39:30 node3 kernel: [ 0.505117] console [netcon0] enabled
Jun 6 17:39:30 node3 kernel: [ 0.505358] netconsole: network logging
started
Jun 6 17:39:30 node3 kernel: [ 0.505767] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
Jun 6 17:39:30 node3 kernel: [ 0.506061] ehci_hcd 0000:00:1d.7: PCI
INT A -> GSI 23 (level, low) -> IRQ 23
Jun 6 17:39:30 node3 kernel: [ 0.506316] ehci_hcd 0000:00:1d.7: EHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.506668] ehci_hcd 0000:00:1d.7: new
USB bus registered, assigned bus number 1
Jun 6 17:39:30 node3 kernel: [ 0.511046] ehci_hcd 0000:00:1d.7:
debug port 1
Jun 6 17:39:30 node3 kernel: [ 0.511304] ehci_hcd 0000:00:1d.7: irq
23, io mem 0xfbffbc00
Jun 6 17:39:30 node3 kernel: [ 0.521020] ehci_hcd 0000:00:1d.7: USB
2.0 started, EHCI 1.00
Jun 6 17:39:30 node3 kernel: [ 0.521298] usb usb1: New USB device
found, idVendor=1d6b, idProduct=0002
Jun 6 17:39:30 node3 kernel: [ 0.521540] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.521988] usb usb1: Product: EHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.522232] usb usb1: Manufacturer:
Linux 2.6.30-krg3.0.0-1 ehci_hcd
Jun 6 17:39:30 node3 kernel: [ 0.522474] usb usb1: SerialNumber:
0000:00:1d.7
Jun 6 17:39:30 node3 kernel: [ 0.522788] usb usb1: configuration #1
chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.523090] hub 1-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.523333] hub 1-0:1.0: 8 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.523789] ohci_hcd: USB 1.1 'Open'
Host Controller (OHCI) Driver
Jun 6 17:39:30 node3 kernel: [ 0.524073] uhci_hcd: USB Universal
Host Controller Interface driver
Jun 6 17:39:30 node3 kernel: [ 0.524374] uhci_hcd 0000:00:1d.0: PCI
INT A -> GSI 23 (level, low) -> IRQ 23
Jun 6 17:39:30 node3 kernel: [ 0.524625] uhci_hcd 0000:00:1d.0: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.524972] uhci_hcd 0000:00:1d.0: new
USB bus registered, assigned bus number 2
Jun 6 17:39:30 node3 kernel: [ 0.525429] uhci_hcd 0000:00:1d.0:
detected 2 ports
Jun 6 17:39:30 node3 kernel: [ 0.525691] uhci_hcd 0000:00:1d.0: irq
23, io base 0x0000d480
Jun 6 17:39:30 node3 kernel: [ 0.525968] usb usb2: New USB device
found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.526213] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.526660] usb usb2: Product: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.526899] usb usb2: Manufacturer:
Linux 2.6.30-krg3.0.0-1 uhci_hcd
Jun 6 17:39:30 node3 kernel: [ 0.532614] usb usb2: SerialNumber:
0000:00:1d.0
Jun 6 17:39:30 node3 kernel: [ 0.532921] usb usb2: configuration #1
chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.533224] hub 2-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.533468] hub 2-0:1.0: 2 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.533873] uhci_hcd 0000:00:1d.1: PCI
INT B -> GSI 19 (level, low) -> IRQ 19
Jun 6 17:39:30 node3 kernel: [ 0.534128] uhci_hcd 0000:00:1d.1: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.534463] uhci_hcd 0000:00:1d.1: new
USB bus registered, assigned bus number 3
Jun 6 17:39:30 node3 kernel: [ 0.534911] uhci_hcd 0000:00:1d.1:
detected 2 ports
Jun 6 17:39:30 node3 kernel: [ 0.535175] uhci_hcd 0000:00:1d.1: irq
19, io base 0x0000d800
Jun 6 17:39:30 node3 kernel: [ 0.535453] usb usb3: New USB device
found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.535698] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.536152] usb usb3: Product: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.536390] usb usb3: Manufacturer:
Linux 2.6.30-krg3.0.0-1 uhci_hcd
Jun 6 17:39:30 node3 kernel: [ 0.536632] usb usb3: SerialNumber:
0000:00:1d.1
Jun 6 17:39:30 node3 kernel: [ 0.536935] usb usb3: configuration #1
chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.537235] hub 3-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.537477] hub 3-0:1.0: 2 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.537867] uhci_hcd 0000:00:1d.2: PCI
INT C -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:39:30 node3 kernel: [ 0.538120] uhci_hcd 0000:00:1d.2: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.538451] uhci_hcd 0000:00:1d.2: new
USB bus registered, assigned bus number 4
Jun 6 17:39:30 node3 kernel: [ 0.538902] uhci_hcd 0000:00:1d.2:
detected 2 ports
Jun 6 17:39:30 node3 kernel: [ 0.539174] uhci_hcd 0000:00:1d.2: irq
18, io base 0x0000d880
Jun 6 17:39:30 node3 kernel: [ 0.539450] usb usb4: New USB device
found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.539692] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.540140] usb usb4: Product: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.540378] usb usb4: Manufacturer:
Linux 2.6.30-krg3.0.0-1 uhci_hcd
Jun 6 17:39:30 node3 kernel: [ 0.540617] usb usb4: SerialNumber:
0000:00:1d.2
Jun 6 17:39:30 node3 kernel: [ 0.540924] usb usb4: configuration #1
chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.541223] hub 4-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.541467] hub 4-0:1.0: 2 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.541863] uhci_hcd 0000:00:1d.3: PCI
INT D -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.542118] uhci_hcd 0000:00:1d.3: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.542450] uhci_hcd 0000:00:1d.3: new
USB bus registered, assigned bus number 5
Jun 6 17:39:30 node3 kernel: [ 0.542904] uhci_hcd 0000:00:1d.3:
detected 2 ports
Jun 6 17:39:30 node3 kernel: [ 0.543180] uhci_hcd 0000:00:1d.3: irq
16, io base 0x0000dc00
Jun 6 17:39:30 node3 kernel: [ 0.543455] usb usb5: New USB device
found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.543696] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.544147] usb usb5: Product: UHCI
Host Controller
Jun 6 17:39:30 node3 kernel: [ 0.544387] usb usb5: Manufacturer:
Linux 2.6.30-krg3.0.0-1 uhci_hcd
Jun 6 17:39:30 node3 kernel: [ 0.544630] usb usb5: SerialNumber:
0000:00:1d.3
Jun 6 17:39:30 node3 kernel: [ 0.544939] usb usb5: configuration #1
chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.545235] hub 5-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.545475] hub 5-0:1.0: 2 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.545926] usbcore: registered new
interface driver usblp
Jun 6 17:39:30 node3 kernel: [ 0.546183] Initializing USB Mass
Storage driver...
Jun 6 17:39:30 node3 kernel: [ 0.546470] usbcore: registered new
interface driver usb-storage
Jun 6 17:39:30 node3 kernel: [ 0.546712] USB Mass Storage support
registered.
Jun 6 17:39:30 node3 kernel: [ 0.547001] usbcore: registered new
interface driver libusual
Jun 6 17:39:30 node3 kernel: [ 0.547393] PNP: No PS/2 controller
found. Probing ports directly.
Jun 6 17:39:30 node3 kernel: [ 0.550270] serio: i8042 KBD port at
0x60,0x64 irq 1
Jun 6 17:39:30 node3 kernel: [ 0.550511] serio: i8042 AUX port at
0x60,0x64 irq 12
Jun 6 17:39:30 node3 kernel: [ 0.550802] mice: PS/2 mouse device
common for all mice
Jun 6 17:39:30 node3 kernel: [ 0.551253] rtc_cmos 00:03: RTC can
wake from S4
Jun 6 17:39:30 node3 kernel: [ 0.551559] rtc_cmos 00:03: rtc core:
registered rtc_cmos as rtc0
Jun 6 17:39:30 node3 kernel: [ 0.551822] rtc0: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
Jun 6 17:39:30 node3 kernel: [ 0.552140] i801_smbus 0000:00:1f.3:
PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 6 17:39:30 node3 kernel: [ 0.552858] device-mapper: ioctl:
4.14.0-ioctl (2008-04-23) initialised: dm-devel-H+wXaHxf7aLQT0dZR+***@public.gmane.org
Jun 6 17:39:30 node3 kernel: [ 0.553408] cpuidle: using governor ladder
Jun 6 17:39:30 node3 kernel: [ 0.553648] cpuidle: using governor menu
Jun 6 17:39:30 node3 kernel: [ 0.554791] usbcore: registered new
interface driver hiddev
Jun 6 17:39:30 node3 kernel: [ 0.555072] usbcore: registered new
interface driver usbhid
Jun 6 17:39:30 node3 kernel: [ 0.555316] usbhid: v2.6:USB HID core
driver
Jun 6 17:39:30 node3 kernel: [ 0.555702] Advanced Linux Sound
Architecture Driver Version 1.0.20.
Jun 6 17:39:30 node3 kernel: [ 0.556270] HDA Intel 0000:00:1b.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.591148] hda_codec: Unknown model
for ALC883, trying auto-probe from BIOS...
Jun 6 17:39:30 node3 kernel: [ 0.595104] ALSA device list:
Jun 6 17:39:30 node3 kernel: [ 0.595348] #0: HDA Intel at
0xfbffc000 irq 16
Jun 6 17:39:30 node3 kernel: [ 0.595614] Netfilter messages via
NETLINK v0.30.
Jun 6 17:39:30 node3 kernel: [ 0.595875] nf_conntrack version 0.5.0
(16384 buckets, 65536 max)
Jun 6 17:39:30 node3 kernel: [ 0.596404] ctnetlink v0.93:
registering with nfnetlink.
Jun 6 17:39:30 node3 kernel: [ 0.597203] ip_tables: (C) 2000-2006
Netfilter Core Team
Jun 6 17:39:30 node3 kernel: [ 0.597466] TCP cubic registered
Jun 6 17:39:30 node3 kernel: [ 0.597703] NET: Registered protocol
family 17
Jun 6 17:39:30 node3 kernel: [ 0.598186] RPC: Registered udp
transport module.
Jun 6 17:39:30 node3 kernel: [ 0.598427] RPC: Registered tcp
transport module.
Jun 6 17:39:30 node3 kernel: [ 0.598679] TIPC: Activated (version
1.7.6 compiled May 31 2011 02:14:31)
Jun 6 17:39:30 node3 kernel: [ 0.599082] NET: Registered protocol
family 30
Jun 6 17:39:30 node3 kernel: [ 0.599327] TIPC: Started in single
node mode
Jun 6 17:39:30 node3 kernel: [ 0.600265] registered taskstats version 1
Jun 6 17:39:30 node3 kernel: [ 0.600632] Magic number: 15:385:693
Jun 6 17:39:30 node3 kernel: [ 0.648484] ata1.00: ATAPI:
TSSTcorpCD/DVDW SH-S182F, SB01, max UDMA/33
Jun 6 17:39:30 node3 kernel: [ 0.654234] ata1.00: configured for UDMA/33
Jun 6 17:39:30 node3 kernel: [ 0.656517] scsi 0:0:0:0: CD-ROM
TSSTcorp CD/DVDW SH-S182F SB01 PQ: 0 ANSI: 5
Jun 6 17:39:30 node3 kernel: [ 0.663985] sr0: scsi3-mmc drive:
48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 6 17:39:30 node3 kernel: [ 0.664451] Uniform CD-ROM driver
Revision: 3.20
Jun 6 17:39:30 node3 kernel: [ 0.664921] sr 0:0:0:0: Attached scsi
generic sg0 type 5
Jun 6 17:39:30 node3 kernel: [ 0.696071] ata3.00: ATA-7: MAXTOR
STM380215AS, 4.AAB, max UDMA/133
Jun 6 17:39:30 node3 kernel: [ 0.696330] ata3.00: 156301488 sectors,
multi 16: LBA48 NCQ (depth 0/32)
Jun 6 17:39:30 node3 kernel: [ 0.771065] ata3.00: configured for
UDMA/133
Jun 6 17:39:30 node3 kernel: [ 0.826891] scsi 2:0:0:0: Direct-Access
ATA MAXTOR STM380215 4.AA PQ: 0 ANSI: 5
Jun 6 17:39:30 node3 kernel: [ 0.827567] sd 2:0:0:0: [sda] 156301488
512-byte hardware sectors: (80.0 GB/74.5 GiB)
Jun 6 17:39:30 node3 kernel: [ 0.828030] sd 2:0:0:0: [sda] Write
Protect is off
Jun 6 17:39:30 node3 kernel: [ 0.828289] sd 2:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 17:39:30 node3 kernel: [ 0.828818] sda:<5>sd 2:0:0:0:
Attached scsi generic sg1 type 0
Jun 6 17:39:30 node3 kernel: [ 0.852318] sda1 sda2 < sda5 >
Jun 6 17:39:30 node3 kernel: [ 0.875945] sd 2:0:0:0: [sda] Attached
SCSI disk
Jun 6 17:39:30 node3 kernel: [ 1.101983] r8169: eth0: link down
Jun 6 17:39:30 node3 kernel: [ 1.102242] r8169: eth0: link down
Jun 6 17:39:30 node3 kernel: [ 1.876238] async/0 used greatest stack
depth: 5088 bytes left
Jun 6 17:39:30 node3 kernel: [ 2.104052] Sending DHCP requests
.<6>r8169: eth0: link up
Jun 6 17:39:30 node3 kernel: [ 5.079141] ., OK
Jun 6 17:39:30 node3 kernel: [ 5.083144] IP-Config: Got DHCP answer
from 192.168.0.2, my address is 192.168.0.5
Jun 6 17:39:30 node3 kernel: [ 5.083671] Automatic setting of
kerrighed_node_id: 5
Jun 6 17:39:30 node3 kernel: [ 5.083911] IP-Config: Complete:
Jun 6 17:39:30 node3 kernel: [ 5.083943] device=eth0,
addr=192.168.0.5, mask=255.255.255.0, gw=192.168.0.2,
Jun 6 17:39:30 node3 kernel: [ 5.084509] host=node3,
domain=kerrighed.foo.bar, nis-domain=(none),
Jun 6 17:39:30 node3 kernel: [ 5.084778]
bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=/nfsroot/kerrighed
Jun 6 17:39:30 node3 kernel: [ 5.085565] md: Waiting for all devices
to be available before autodetect
Jun 6 17:39:30 node3 kernel: [ 5.085807] md: If you don't use raid,
use raid=noautodetect
Jun 6 17:39:30 node3 kernel: [ 5.086247] md: Autodetecting RAID arrays.
Jun 6 17:39:30 node3 kernel: [ 5.086486] md: Scanned 0 and added 0
devices.
Jun 6 17:39:30 node3 kernel: [ 5.086722] md: autorun ...
Jun 6 17:39:30 node3 kernel: [ 5.086956] md: ... autorun DONE.
Jun 6 17:39:30 node3 kernel: [ 5.087220] Looking up port of RPC
100003/2 on 192.168.0.2
Jun 6 17:39:30 node3 kernel: [ 5.088440] Looking up port of RPC
100005/1 on 192.168.0.2
Jun 6 17:39:30 node3 kernel: [ 5.090972] VFS: Mounted root (nfs
filesystem) on device 0:15.
Jun 6 17:39:30 node3 kernel: [ 5.091243] Kerrighed: stage 0
Jun 6 17:39:30 node3 kernel: [ 5.091482] Kerrighed session ID : 1
Jun 6 17:39:30 node3 kernel: [ 5.091719] Kerrighed node ID : 5
Jun 6 17:39:30 node3 kernel: [ 5.091955] Kerrighed min nodes : -1
Jun 6 17:39:30 node3 kernel: [ 5.092193] Kerrighed: stage 1
Jun 6 17:39:30 node3 kernel: [ 5.092515] Kerrighed: stage 2
Jun 6 17:39:30 node3 kernel: [ 5.092750] Init Kerrighed low-level
framework...
Jun 6 17:39:30 node3 kernel: [ 5.092995] Init kerrighed syscall
mechanism
Jun 6 17:39:30 node3 kernel: [ 5.093243] Kerrighed tools - init module
Jun 6 17:39:30 node3 kernel: [ 5.093832] khelper used greatest stack
depth: 4248 bytes left
Jun 6 17:39:30 node3 kernel: [ 5.094308] TIPC: Started in network mode
Jun 6 17:39:30 node3 kernel: [ 5.094559] TIPC: Own node address
<1.1.6>, network identity 1
Jun 6 17:39:30 node3 kernel: [ 5.094809] RPC initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.095107] Init Kerrighed low-level
framework (nodeid 5) : done
Jun 6 17:39:30 node3 kernel: [ 5.095349] Init Kerrighed distributed
services...
Jun 6 17:39:30 node3 kernel: [ 5.095588] KDDM initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.095934] KDDM set init
Jun 6 17:39:30 node3 kernel: [ 5.096253] KDDM set init : done
Jun 6 17:39:30 node3 kernel: [ 5.096567] KDDM initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.096811] KerMM initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.097067] KerMM initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.097303] DVFS initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.097545] FAF: initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.097789] FAF: initialisation : done
Jun 6 17:39:30 node3 kernel: [ 5.098032] DVFS initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.098269] KrgIPC initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.098592] Shm Server configured
Jun 6 17:39:30 node3 kernel: [ 5.098830] KrgIPC initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.099077] Proc initialisation: start
Jun 6 17:39:30 node3 kernel: [ 5.099383] Proc initialisation: done
Jun 6 17:39:30 node3 kernel: [ 5.099682] EPM initialisation: start
Jun 6 17:39:30 node3 kernel: [ 5.100031] EPM initialisation: done
Jun 6 17:39:30 node3 kernel: [ 5.100269] Init Kerrighed distributed
services: done
Jun 6 17:39:30 node3 kernel: [ 5.100558] scheduler initialization
succeeded!
Jun 6 17:39:30 node3 kernel: [ 5.100796] Kerrighed... loaded!
Jun 6 17:39:30 node3 kernel: [ 5.101056] Freeing unused kernel
memory: 544k freed
Jun 6 17:39:30 node3 kernel: [ 5.101481] Write protecting the kernel
read-only data: 6828k
Jun 6 17:39:30 node3 kernel: [ 5.237111] modprobe used greatest
stack depth: 3416 bytes left
Jun 6 17:39:30 node3 kernel: [ 5.620674] create_static_n used
greatest stack depth: 3392 bytes left
Jun 6 17:39:30 node3 rsyslogd: [origin software="rsyslogd"
swVersion="3.18.6" x-pid="1732" x-info="http://www.rsyslog.com"] restart
Jun 6 17:39:30 node3 kernel: [ 8.988799] Try to enable bearer on
eth0:<5>TIPC: Enabled bearer <eth:eth0>, discovery domain <1.1.0>,
priority 10
Jun 6 17:39:30 node3 kernel: [ 8.989322] ok
Jun 6 17:39:30 node3 kernel: [ 8.989562] TIPC: Established link
<1.1.6:eth0-1.1.5:eth0> on network plane A
Jun 6 17:39:31 node3 kernel: [ 9.990828] successfully registered
scheduler_policy_type round_robin_balancer
Jun 6 17:39:31 node3 kernel: [ 10.013407] successfully registered
scheduler_policy_type mosix_load_balancer
Jun 6 17:39:31 node3 kernel: [ 10.044445] Kerrighed is running on 2
nodes: 4-5
Jun 6 14:52:07 node2 kernel: [ 792.308128] send_kerrighed_signal: 13
(events/2) -> 3887 (dup_finder6.pl)
Jun 6 14:52:07 node2 kernel: [ 792.644957] Check why the page is dirty...
Jun 6 14:52:10 node2 kernel: [ 795.299980] send_kerrighed_signal: 12
(events/1) -> 3888 (dup_finder6.pl)
Jun 6 14:52:13 node2 kernel: [ 798.291867] send_kerrighed_signal: 12
(events/1) -> 3886 (dup_finder6.pl)
Jun 6 14:52:26 node2 kernel: [ 811.256738] send_kerrighed_signal: 13
(events/2) -> 3893 (dup_finder6.pl)
Jun 6 14:52:26 node2 kernel: [ 811.484145] Check why the page is dirty...
Jun 6 14:52:27 node2 kernel: [ 811.945313] CPU 1
Jun 6 14:52:27 node2 kernel: [ 811.945566] Modules linked in:
remote_cache_filter threshold_filter freq_limit_filter
mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 6 14:52:27 node2 kernel: [ 811.946103] Pid: 2111, comm: krgrpc Not
tainted 2.6.30-krg3.0.0-1 #2 System Product Name
Jun 6 14:52:27 node2 kernel: [ 811.946608] RIP:
0010:[<ffffffff810b9342>] [<ffffffff810b9342>] __kmalloc+0xa8/0x106
Jun 6 14:52:27 node2 kernel: [ 811.947120] RSP: 0000:ffff88011d4abab0
EFLAGS: 00010006
Jun 6 14:52:27 node2 kernel: [ 811.947378] RAX: 0000000000000000 RBX:
040000000000005a RCX: ffffffff81472d13
Jun 6 14:52:27 node2 kernel: [ 811.947636] RDX: ffff88002cc27e80 RSI:
0000000000000020 RDI: 0000000000000001
Jun 6 14:52:27 node2 kernel: [ 811.947898] RBP: ffff88011d4abae0 R08:
ffff88011fc01740 R09: 0000000000000086
Jun 6 14:52:27 node2 kernel: [ 811.948156] R10: 000000000001b73b R11:
0000000000000002 R12: 0000000000000282
Jun 6 14:52:27 node2 kernel: [ 811.948417] R13: ffffffff81761330 R14:
0000000000000020 R15: 0000000000000056
Jun 6 14:52:27 node2 kernel: [ 811.948679] FS: 0000000000000000(0000)
GS:ffff88002cc1a000(0000) knlGS:0000000000000000
Jun 6 14:52:27 node2 kernel: [ 811.949180] CS: 0010 DS: 0018 ES: 0018
CR0: 000000008005003b
Jun 6 14:52:27 node2 kernel: [ 811.949437] CR2: 00007ff952ab1004 CR3:
000000011c8c4000 CR4: 00000000000006e0
Jun 6 14:52:27 node2 kernel: [ 811.949693] DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Jun 6 14:52:27 node2 kernel: [ 811.949951] DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Jun 6 14:52:27 node2 kernel: [ 811.950210] Process krgrpc (pid: 2111,
threadinfo ffff88011d4aa000, task ffff88011e799890)
Jun 6 14:52:27 node2 kernel: [ 811.950966] 0000006000000098
ffff88011a216000 0000000000000056 0000000000000001
Jun 6 14:52:27 node2 kernel: [ 811.965518] RSP <ffff88011d4abab0>
Jun 6 14:52:27 node2 kernel: [ 811.966010] ---[ end trace
381f8ba92e94bae1 ]---
Jun 6 17:54:44 node3 kernel: [ 923.045143] TIPC: Resetting link
<1.1.6:eth0-1.1.5:eth0>, peer not responding
Jun 6 17:54:44 node3 kernel: [ 923.045578] TIPC: Lost link
<1.1.6:eth0-1.1.5:eth0> on network plane A
Jun 6 17:54:44 node3 kernel: [ 923.045795] TIPC: Lost contact with <1.1.5>

Louis Rilling

2011-06-27 14:57:29 UTC

Permalink

Hello Alceu,

Just a quick update on this bug. I was able to run your program with the following results:
the IPC version ran fine (as far as I could see), but processes were massively
killed with SIGBUS before the end of the non-IPC version. I still have to find
who could generate those SIGBUS.

By the way, on the setup I used (based on KVM VMs), the IPC version ran for
almost one hour, but the non-IPC version ran for ages before actually crashing.
Do you have sets of parameters that could lead to shorter execution times, and
still trigger the bugs that you oberved?

Thanks,

Louis

Post by Alceu Rodrigues de Freitas Junior
Hello Louis,

I'm putting the complete log messages, since node booting, at the
end of the e-mail, after my signature.
If it's not enough, I can get a screenshot from it.

Post by Louis Rilling
Posting the code could help reproducing the bug actually, and collect complete
traces ;). However, I can't tell you when time will be available to try
reproducing it.

I'm not sure that posting the code and the necessary database on an
e-mail will not bother other subscribers. I'll send you by e-mail
the complete set privately. There is not problem in sharing the
code, I just think is too large for here.
Regards,
Alceu
Jun 6 14:39:47 node2 kernel: imklog 3.18.6, log source = /proc/kmsg
started.
Jun 6 14:39:47 node2 rsyslogd: [origin software="rsyslogd"
swVersion="3.18.6" x-pid="1961" x-info="http://www.rsyslog.com"] restart
Jun 6 14:39:47 node2 kernel: [ 0.000000] Initializing cgroup
subsys cpuset
Jun 6 14:39:47 node2 kernel: [ 0.000000] Initializing cgroup subsys cpu
Jun 6 14:39:47 node2 kernel: [ 0.000000] Linux version
4.3.2-1.1) ) #2 SMP Tue May 31 02:15:37 UTC 2011
root=/dev/nfs nfsroot=192.168.0.2:/nfsroot/kerrighed ip=dhcp rw
session_id=1 autonodeid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 14:39:47 node2 kernel: [ 0.000000] Intel GenuineIntel
Jun 6 14:39:47 node2 kernel: [ 0.000000] AMD AuthenticAMD
Jun 6 14:39:47 node2 kernel: [ 0.000000] Centaur CentaurHauls
0000000000000000 - 000000000009fc00 (usable)
000000000009fc00 - 00000000000a0000 (reserved)
00000000000e4000 - 0000000000100000 (reserved)
0000000000100000 - 00000000df770000 (usable)
00000000df770000 - 00000000df788000 (ACPI data)
00000000df788000 - 00000000df7dc000 (ACPI NVS)
00000000df7dc000 - 00000000e0000000 (reserved)
00000000fee00000 - 00000000fee01000 (reserved)
00000000ffe00000 - 0000000100000000 (reserved)
0000000100000000 - 0000000120000000 (usable)
Jun 6 14:39:47 node2 kernel: [ 0.000000] DMI 2.6 present.
Jun 6 14:39:47 node2 kernel: [ 0.000000] AMI BIOS detected: BIOS
may corrupt low RAM, working around it.
Jun 6 14:39:47 node2 kernel: [ 0.000000] last_pfn = 0x120000
max_arch_pfn = 0x100000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] x86 PAT enabled: cpu 0,
old 0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 0.000000] last_pfn = 0xdf770
max_arch_pfn = 0x100000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Scanning 0 areas for
low memory corruption
0000000000000000 - 0000000000010000 (reserved)
0000000000010000 - 000000000009fc00 (usable)
000000000009fc00 - 00000000000a0000 (reserved)
00000000000e4000 - 0000000000100000 (reserved)
0000000000100000 - 00000000df770000 (usable)
00000000df770000 - 00000000df788000 (ACPI data)
00000000df788000 - 00000000df7dc000 (ACPI NVS)
00000000df7dc000 - 00000000e0000000 (reserved)
00000000fee00000 - 00000000fee01000 (reserved)
00000000ffe00000 - 0000000100000000 (reserved)
0000000100000000 - 0000000120000000 (usable)
0000000000000000-00000000df770000
0000000100000000-0000000120000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: RSDP
00000000000fba20 00024 (v02 ACPIAM)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: XSDT
00000000df770100 00054 (v01 070710 XSDT1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: FACP
00000000df770290 000F4 (v03 070710 FACP1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: DSDT
00000000df7704a0 09463 (v01 A1590 A1590001 00000001 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: FACS
00000000df788000 00040
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: APIC
00000000df770390 000CC (v01 070710 APIC1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: MCFG
00000000df770460 0003C (v01 070710 OEMMCFG 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: OEMB
00000000df788040 00072 (v01 070710 OEMB1713 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: HPET
00000000df779910 00038 (v01 070710 OEMHPET 20100707 MSFT 00000097)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: SSDT
00000000df7899f0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 0.000000] No NUMA configuration found
Jun 6 14:39:47 node2 kernel: [ 0.000000] Faking a node at
0000000000000000-0000000120000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Bootmem setup node 0
0000000000000000-0000000120000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] NODE_DATA
[0000000000015000 - 0000000000019fff]
Jun 6 14:39:47 node2 kernel: [ 0.000000] bootmap
[000000000001a000 - 000000000003dfff] pages 24
Jun 6 14:39:47 node2 kernel: [ 0.000000] (7 early reservations)
==> bootmem [0000000000 - 0120000000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #1 [0000006000 -
0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #2 [0001000000 -
00018dd198] TEXT DATA BSS ==> [0001000000 - 00018dd198]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #3 [000009f800 -
0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #4 [00018de000 -
00018de2ba] BRK ==> [00018de000 - 00018de2ba]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #5 [0000010000 -
0000014000] PGTABLE ==> [0000010000 - 0000014000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] #6 [0000014000 -
0000015000] PGTABLE ==> [0000014000 - 0000015000]
Jun 6 14:39:47 node2 kernel: [ 0.000000] found SMP MP-table at
[ffff8800000ff780] ff780
Jun 6 14:39:47 node2 kernel: [ 0.000000] DMA 0x00000010
-> 0x00001000
Jun 6 14:39:47 node2 kernel: [ 0.000000] DMA32 0x00001000
-> 0x00100000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Normal 0x00100000
-> 0x00120000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Movable zone start PFN
for each node
Jun 6 14:39:47 node2 kernel: [ 0.000000] early_node_map[3]
active PFN ranges
Jun 6 14:39:47 node2 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Jun 6 14:39:47 node2 kernel: [ 0.000000] 0: 0x00000100 -> 0x000df770
Jun 6 14:39:47 node2 kernel: [ 0.000000] 0: 0x00100000 -> 0x00120000
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x00] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x04] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x03] lapic_id[0x01] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x04] lapic_id[0x05] enabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x05] lapic_id[0x84] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x06] lapic_id[0x85] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x07] lapic_id[0x86] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x08] lapic_id[0x87] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x09] lapic_id[0x88] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x0a] lapic_id[0x89] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x0b] lapic_id[0x8a] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x0c] lapic_id[0x8b] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x0d] lapic_id[0x8c] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x0e] lapic_id[0x8d] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x0f] lapic_id[0x8e] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x10] lapic_id[0x8f] disabled)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x06]
address[0xfec00000] gsi_base[0])
Jun 6 14:39:47 node2 kernel: [ 0.000000] IOAPIC[0]: apic_id 6,
version 0, address 0xfec00000, GSI 0-23
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus
0 bus_irq 0 global_irq 2 dfl dfl)
Jun 6 14:39:47 node2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus
0 bus_irq 9 global_irq 9 high level)
Jun 6 14:39:47 node2 kernel: [ 0.000000] Using ACPI (MADT) for
SMP configuration information
0x8086a701 base: 0xfed00000
Jun 6 14:39:47 node2 kernel: [ 0.000000] SMP: Allowing 16 CPUs,
12 hotplug CPUs
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e4000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000e4000 - 0000000000100000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000df770000 - 00000000df788000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000df788000 - 00000000df7dc000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000df7dc000 - 00000000e0000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000e0000000 - 00000000fee00000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fee00000 - 00000000fee01000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fee01000 - 00000000ffe00000
Jun 6 14:39:47 node2 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000ffe00000 - 0000000100000000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Allocating PCI
resources starting at e2000000 (gap: e0000000:1ee00000)
Jun 6 14:39:47 node2 kernel: [ 0.000000] NR_CPUS:64
nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
Jun 6 14:39:47 node2 kernel: [ 0.000000] PERCPU: Embedded 26
pages at ffff88002cc00000, static data 74208 bytes
Jun 6 14:39:47 node2 kernel: [ 0.000000] Built 1 zonelists in
Node order, mobility grouping on. Total pages: 1025431
Jun 6 14:39:47 node2 kernel: [ 0.000000] Policy zone: Normal
root=/dev/nfs nfsroot=192.168.0.2:/nfsroot/kerrighed ip=dhcp rw
session_id=1 autonodeid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 14:39:47 node2 kernel: [ 0.000000] Initializing CPU#0
Jun 6 14:39:47 node2 kernel: [ 0.000000] Experimental
hierarchical RCU implementation.
Jun 6 14:39:47 node2 kernel: [ 0.000000] Experimental
hierarchical RCU init done.
Jun 6 14:39:47 node2 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:536
4096 (order: 12, 32768 bytes)
Jun 6 14:39:47 node2 kernel: [ 0.000000] Extended CMOS year: 2000
Jun 6 14:39:47 node2 kernel: [ 0.000000] Fast TSC calibration using PIT
Jun 6 14:39:47 node2 kernel: [ 0.000000] Detected 3211.417 MHz
processor.
Jun 6 14:39:47 node2 kernel: [ 48.708375] Console: colour VGA+ 80x25
Jun 6 14:39:47 node2 kernel: [ 48.708377] console [tty0] enabled
Jun 6 14:39:47 node2 kernel: [ 48.747480] Checking aperture...
Jun 6 14:39:47 node2 kernel: [ 48.752641] No AGP bridge found
Jun 6 14:39:47 node2 kernel: [ 48.752960] PCI-DMA: Using software
bounce buffering for IO (SWIOTLB)
Jun 6 14:39:47 node2 kernel: [ 48.761360] Placing 64MB software
IO TLB between ffff880020000000 - ffff880024000000
Jun 6 14:39:47 node2 kernel: [ 48.761875] software IO TLB at phys
0x20000000 - 0x24000000
4032304k/4718592k available (4716k kernel code, 533508k absent,
152780k reserved, 2832k data, 544k init)
Jun 6 14:39:47 node2 kernel: [ 48.790607] SLUB: Genslabs=14,
HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Jun 6 14:39:47 node2 kernel: [ 48.791236] HPET: 8 timers in
total, 5 timers will be used for per-cpu timer
Jun 6 14:39:47 node2 kernel: [ 48.791518] Calibrating delay loop
(skipped), value calculated using timer frequency.. 6422.83 BogoMIPS
(lpj=3211417)
Jun 6 14:39:47 node2 kernel: [ 48.792300] Dentry cache hash table
entries: 524288 (order: 10, 4194304 bytes)
Jun 6 14:39:47 node2 kernel: [ 48.793617] Inode-cache hash table
entries: 262144 (order: 9, 2097152 bytes)
Jun 6 14:39:47 node2 kernel: [ 48.794264] Mount-cache hash table
entries: 256
Jun 6 14:39:47 node2 kernel: [ 48.794633] Initializing cgroup subsys ns
Jun 6 14:39:47 node2 kernel: [ 48.794909] Initializing cgroup
subsys cpuacct
Jun 6 14:39:47 node2 kernel: [ 48.795186] Initializing cgroup
subsys freezer
Jun 6 14:39:47 node2 kernel: [ 48.795551] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 48.795824] CPU: Processor Core ID: 0
Jun 6 14:39:47 node2 kernel: [ 48.796098] CPU: L1 I cache: 32K,
L1 D cache: 32K
Jun 6 14:39:47 node2 kernel: [ 48.796414] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 48.796686] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 48.796959] CPU 0/0x0 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 48.797242] CPU0: Thermal
monitoring enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 48.797519] CPU 0 MCA banks CMCI:2
CMCI:3 CMCI:5 CMCI:6
Jun 6 14:39:47 node2 kernel: [ 48.797972] using mwait in idle threads.
Jun 6 14:39:47 node2 kernel: [ 48.798264] ACPI: Core revision 20090320
Jun 6 14:39:47 node2 kernel: [ 48.831934] Setting APIC routing to flat
Jun 6 14:39:47 node2 kernel: [ 48.832532] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 6 14:39:47 node2 kernel: [ 48.842784] CPU0: Intel(R) Core(TM)
Jun 6 14:39:47 node2 kernel: [ 48.944869] Booting processor 1
APIC 0x4 ip 0x6000
Jun 6 14:39:47 node2 kernel: [ 48.955525] Initializing CPU#1
Jun 6 14:39:47 node2 kernel: [ 49.015585] Calibrating delay using
timer specific routine.. 6422.05 BogoMIPS (lpj=3211026)
Jun 6 14:39:47 node2 kernel: [ 49.015592] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.015592] CPU: Processor Core ID: 2
Jun 6 14:39:47 node2 kernel: [ 49.015594] CPU: L1 I cache: 32K,
L1 D cache: 32K
Jun 6 14:39:47 node2 kernel: [ 49.015595] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 49.015596] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 49.015597] CPU 1/0x4 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 49.015605] CPU1: Thermal
monitoring enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 49.015608] CPU 1 MCA banks CMCI:2
CMCI:3 CMCI:5 SHD:6
Jun 6 14:39:47 node2 kernel: [ 49.016160] x86 PAT enabled: cpu 1,
old 0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 49.016973] CPU1: Intel(R) Core(TM)
Jun 6 14:39:47 node2 kernel: [ 49.026340] Skipping
synchronization checks as TSC is reliable.
Jun 6 14:39:47 node2 kernel: [ 49.026688] Booting processor 2
APIC 0x1 ip 0x6000
Jun 6 14:39:47 node2 kernel: [ 49.037176] Initializing CPU#2
Jun 6 14:39:47 node2 kernel: [ 49.097353] Calibrating delay using
timer specific routine.. 6422.05 BogoMIPS (lpj=3211025)
Jun 6 14:39:47 node2 kernel: [ 49.097360] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.097361] CPU: Processor Core ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.097363] CPU: L1 I cache: 32K,
L1 D cache: 32K
Jun 6 14:39:47 node2 kernel: [ 49.097365] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 49.097365] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 49.097367] CPU 2/0x1 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 49.097376] CPU2: Thermal
monitoring enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 49.097379] CPU 2 MCA banks SHD:2
SHD:3 SHD:5 SHD:6
Jun 6 14:39:47 node2 kernel: [ 49.098092] x86 PAT enabled: cpu 2,
old 0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 49.099132] CPU2: Intel(R) Core(TM)
Jun 6 14:39:47 node2 kernel: [ 49.102762] Skipping
synchronization checks as TSC is reliable.
Jun 6 14:39:47 node2 kernel: [ 49.103108] Booting processor 3
APIC 0x5 ip 0x6000
Jun 6 14:39:47 node2 kernel: [ 49.113598] Initializing CPU#3
Jun 6 14:39:47 node2 kernel: [ 49.174135] Calibrating delay using
timer specific routine.. 6422.05 BogoMIPS (lpj=3211025)
Jun 6 14:39:47 node2 kernel: [ 49.174141] CPU: Physical Processor ID: 0
Jun 6 14:39:47 node2 kernel: [ 49.174142] CPU: Processor Core ID: 2
Jun 6 14:39:47 node2 kernel: [ 49.174144] CPU: L1 I cache: 32K,
L1 D cache: 32K
Jun 6 14:39:47 node2 kernel: [ 49.174145] CPU: L2 cache: 256K
Jun 6 14:39:47 node2 kernel: [ 49.174146] CPU: L3 cache: 4096K
Jun 6 14:39:47 node2 kernel: [ 49.174147] CPU 3/0x5 -> Node 0
Jun 6 14:39:47 node2 kernel: [ 49.174155] CPU3: Thermal
monitoring enabled (TM1)
Jun 6 14:39:47 node2 kernel: [ 49.174157] CPU 3 MCA banks SHD:2
SHD:3 SHD:5 SHD:6
Jun 6 14:39:47 node2 kernel: [ 49.174912] x86 PAT enabled: cpu 3,
old 0x7040600070406, new 0x7010600070106
Jun 6 14:39:47 node2 kernel: [ 49.176014] CPU3: Intel(R) Core(TM)
Jun 6 14:39:47 node2 kernel: [ 49.179634] Skipping
synchronization checks as TSC is reliable.
Jun 6 14:39:47 node2 kernel: [ 49.179923] Brought up 4 CPUs
Jun 6 14:39:47 node2 kernel: [ 49.180197] Total of 4 processors
activated (25688.98 BogoMIPS).
Jun 6 14:39:47 node2 kernel: [ 49.180691] khelper used greatest
stack depth: 5952 bytes left
Jun 6 14:39:47 node2 kernel: [ 49.181026] net_namespace: 1024 bytes
Jun 6 14:39:47 node2 kernel: [ 49.181466] Time: 14:39:42 Date: 06/06/11
Jun 6 14:39:47 node2 kernel: [ 49.181778] NET: Registered
protocol family 16
Jun 6 14:39:47 node2 kernel: [ 49.182308] ACPI: bus type pci registered
Jun 6 14:39:47 node2 kernel: [ 49.182657] PCI: MCFG configuration
0: base f8000000 segment 0 buses 0 - 63
Jun 6 14:39:47 node2 kernel: [ 49.182939] PCI: Not using MMCONFIG.
Jun 6 14:39:47 node2 kernel: [ 49.183215] PCI: Using
configuration type 1 for base access
Jun 6 14:39:47 node2 kernel: [ 49.186805] bio: create slab <bio-0> at 0
Jun 6 14:39:47 node2 kernel: [ 49.197919] ACPI: Interpreter enabled
Jun 6 14:39:47 node2 kernel: [ 49.198197] ACPI: (supports S0 S1 S3 S4 S5)
Jun 6 14:39:47 node2 kernel: [ 49.198661] ACPI: Using IOAPIC for
interrupt routing
Jun 6 14:39:47 node2 kernel: [ 49.198986] PCI: MCFG configuration
0: base f8000000 segment 0 buses 0 - 63
Jun 6 14:39:47 node2 kernel: [ 49.201781] PCI: MCFG area at
f8000000 reserved in ACPI motherboard resources
Jun 6 14:39:47 node2 kernel: [ 49.203173] PCI: Using MMCONFIG at
f8000000 - fbffffff
Jun 6 14:39:47 node2 kernel: [ 49.211574] ACPI Warning
(tbutils-0246): Incorrect checksum in table [OEMB] - E7, should be
E6 [20090320]
Jun 6 14:39:47 node2 kernel: [ 49.212269] ACPI: No dock devices found.
Jun 6 14:39:47 node2 kernel: [ 49.212759] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Jun 6 14:39:47 node2 kernel: [ 49.213114] pci 0000:00:01.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.213395] pci 0000:00:01.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.213764] pci 0000:00:1a.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.214046] pci 0000:00:1a.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.214381] pci 0000:00:1b.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.214662] pci 0000:00:1b.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.214977] pci 0000:00:1c.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.215259] pci 0000:00:1c.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.215577] pci 0000:00:1c.4: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.215858] pci 0000:00:1c.4: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.216217] pci 0000:00:1d.0: PME#
supported from D0 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.216497] pci 0000:00:1d.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.217323] pci 0000:02:00.0: PME#
supported from D1 D2 D3hot
Jun 6 14:39:47 node2 kernel: [ 49.217605] pci 0000:02:00.0: PME# disabled
Jun 6 14:39:47 node2 kernel: [ 49.217990] pci 0000:04:01.0: PME#
supported from D0 D1 D2 D3hot D3cold
Jun 6 14:39:47 node2 kernel: [ 49.218272] pci 0000:04:01.0: PME# disabled
transparent bridge
Jun 6 14:39:47 node2 kernel: [ 49.230667] ACPI: PCI Interrupt
Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
Jun 6 14:39:47 node2 kernel: [ 49.231438] ACPI: PCI Interrupt
Link [LNKB] (IRQs *5)
Jun 6 14:39:47 node2 kernel: [ 49.231921] ACPI: PCI Interrupt
Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
Jun 6 14:39:47 node2 kernel: [ 49.232687] ACPI: PCI Interrupt
Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
Jun 6 14:39:47 node2 kernel: [ 49.233758] ACPI: PCI Interrupt
Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
Jun 6 14:39:47 node2 kernel: [ 49.234828] ACPI: PCI Interrupt
Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
Jun 6 14:39:47 node2 kernel: [ 49.235593] ACPI: PCI Interrupt
Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
Jun 6 14:39:47 node2 kernel: [ 49.236360] ACPI: PCI Interrupt
Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
Jun 6 14:39:47 node2 kernel: [ 49.237199] SCSI subsystem initialized
Jun 6 14:39:47 node2 kernel: [ 49.237661] usbcore: registered new
interface driver usbfs
Jun 6 14:39:47 node2 kernel: [ 49.237961] usbcore: registered new
interface driver hub
Jun 6 14:39:47 node2 kernel: [ 49.238266] usbcore: registered new
device driver usb
Jun 6 14:39:47 node2 kernel: [ 49.238683] PCI: Using ACPI for IRQ routing
Jun 6 14:39:47 node2 kernel: [ 49.242026] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
Jun 6 14:39:47 node2 kernel: [ 49.242628] hpet0: 8 comparators,
64-bit 14.318180 MHz counter
Jun 6 14:39:47 node2 kernel: [ 49.248941] pnp: PnP ACPI init
Jun 6 14:39:47 node2 kernel: [ 49.249231] ACPI: bus type pnp registered
Jun 6 14:39:47 node2 kernel: [ 49.252351] pnp: PnP ACPI: found 15 devices
Jun 6 14:39:47 node2 kernel: [ 49.252625] ACPI: ACPI bus type pnp
unregistered
Jun 6 14:39:47 node2 kernel: [ 49.252906] system 00:01: iomem
range 0xfed14000-0xfed19fff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.253192] system 00:06: ioport
range 0x290-0x29f has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.253474] system 00:07: ioport
range 0x4d0-0x4d1 has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.253753] system 00:07: ioport
range 0x800-0x87f has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254036] system 00:07: ioport
range 0x500-0x57f has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254316] system 00:07: iomem
range 0xfed1c000-0xfed1ffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254597] system 00:07: iomem
range 0xfed20000-0xfed3ffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.254878] system 00:07: iomem
range 0xfed40000-0xfed8ffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.255166] system 00:0a: iomem
range 0xffc00000-0xffdfffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.255449] system 00:0c: iomem
range 0xfec00000-0xfec00fff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.255730] system 00:0c: iomem
range 0xfee00000-0xfee00fff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.256015] system 00:0d: iomem
range 0xf8000000-0xfbffffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.256294] system 00:0e: iomem
range 0x0-0x9ffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.256574] system 00:0e: iomem
range 0xc0000-0xcffff has been reserved
Jun 6 14:39:47 node2 kernel: [ 49.256854] system 00:0e: iomem
range 0xe0000-0xfffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.257139] system 00:0e: iomem
range 0x100000-0xdfffffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.257654] system 00:0e: iomem
range 0xfed90000-0xffffffff could not be reserved
Jun 6 14:39:47 node2 kernel: [ 49.262958] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
Jun 6 14:39:47 node2 kernel: [ 49.263238] pci 0000:00:01.0: IO
window: 0xc000-0xcfff
Jun 6 14:39:47 node2 kernel: [ 49.263514] pci 0000:00:01.0: MEM
window: 0xf6000000-0xf7dfffff
PREFETCH window: 0x000000e0000000-0x000000f3ffffff
Jun 6 14:39:47 node2 kernel: [ 49.264311] pci 0000:00:1c.0: PCI
bridge, secondary bus 0000:03
Jun 6 14:39:47 node2 kernel: [ 49.264589] pci 0000:00:1c.0: IO
window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.264868] pci 0000:00:1c.0: MEM
window: disabled
PREFETCH window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.265425] pci 0000:00:1c.4: PCI
bridge, secondary bus 0000:02
Jun 6 14:39:47 node2 kernel: [ 49.265705] pci 0000:00:1c.4: IO
window: 0xd000-0xdfff
Jun 6 14:39:47 node2 kernel: [ 49.265987] pci 0000:00:1c.4: MEM
window: 0xf7e00000-0xf7efffff
PREFETCH window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.266549] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:04
Jun 6 14:39:47 node2 kernel: [ 49.266829] pci 0000:00:1e.0: IO
window: 0xe000-0xefff
Jun 6 14:39:47 node2 kernel: [ 49.267109] pci 0000:00:1e.0: MEM
window: 0xf7f00000-0xf7ffffff
PREFETCH window: disabled
Jun 6 14:39:47 node2 kernel: [ 49.267679] pci 0000:00:01.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 14:39:47 node2 kernel: [ 49.267970] pci 0000:00:1c.0: PCI
INT A -> GSI 17 (level, low) -> IRQ 17
Jun 6 14:39:47 node2 kernel: [ 49.268255] pci 0000:00:1c.4: PCI
INT A -> GSI 17 (level, low) -> IRQ 17
Jun 6 14:39:47 node2 kernel: [ 49.268574] NET: Registered
protocol family 2
Jun 6 14:39:47 node2 kernel: [ 49.284978] IP route cache hash
table entries: 131072 (order: 8, 1048576 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.286116] TCP established hash
table entries: 524288 (order: 11, 8388608 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.288102] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.288562] TCP: Hash tables
configured (established 524288 bind 65536)
Jun 6 14:39:47 node2 kernel: [ 49.288845] TCP reno registered
Jun 6 14:39:47 node2 kernel: [ 49.292961] NET: Registered
protocol family 1
Jun 6 14:39:47 node2 kernel: [ 49.294357] Microcode Update
Jun 6 14:39:47 node2 kernel: [ 49.294874] Scanning for low memory
corruption every 60 seconds
Jun 6 14:39:47 node2 kernel: [ 49.295295] audit: initializing
netlink socket (disabled)
Jun 6 14:39:47 node2 kernel: [ 49.295579] type=2000
audit(1307371181.368:1): initialized
Jun 6 14:39:47 node2 kernel: [ 49.301343] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
Jun 6 14:39:47 node2 kernel: [ 49.303066] VFS: Disk quotas dquot_6.5.2
Jun 6 14:39:47 node2 kernel: [ 49.303385] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
Jun 6 14:39:47 node2 kernel: [ 49.304212] msgmni has been set to 7875
Jun 6 14:39:47 node2 kernel: [ 49.304757] alg: No test for stdrng (krng)
Jun 6 14:39:47 node2 kernel: [ 49.305096] Block layer SCSI
generic (bsg) driver version 0.4 loaded (major 252)
Jun 6 14:39:47 node2 kernel: [ 49.305608] io scheduler noop registered
Jun 6 14:39:47 node2 kernel: [ 49.305885] io scheduler
anticipatory registered
Jun 6 14:39:47 node2 kernel: [ 49.306161] io scheduler deadline
registered
Jun 6 14:39:47 node2 kernel: [ 49.306474] io scheduler cfq
registered (default)
Jun 6 14:39:47 node2 kernel: [ 49.307272] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
Jun 6 14:39:47 node2 kernel: [ 49.307717] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 6 14:39:47 node2 kernel: [ 49.308236] ACPI: Power Button [PWRF]
Jun 6 14:39:47 node2 kernel: [ 49.308563] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 6 14:39:47 node2 kernel: [ 49.309078] ACPI: Power Button [PWRB]
Jun 6 14:39:47 node2 kernel: [ 49.310151] ACPI: SSDT
00000000df7880c0 01448 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 49.311089] ACPI: SSDT
00000000df789510 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
Jun 6 14:39:47 node2 kernel: [ 49.312047] ACPI: CPU0 (power
states: C1[C1] C2[C2])
registered as cooling_device0
Jun 6 14:39:47 node2 kernel: [ 49.312958] ACPI: CPU1 (power
states: C1[C1] C2[C2])
registered as cooling_device1
Jun 6 14:39:47 node2 kernel: [ 49.319558] ACPI: CPU2 (power
states: C1[C1] C2[C2])
registered as cooling_device2
Jun 6 14:39:47 node2 kernel: [ 49.320461] ACPI: CPU3 (power
states: C1[C1] C2[C2])
registered as cooling_device3
Jun 6 14:39:47 node2 kernel: [ 49.325223] Non-volatile memory driver v1.3
Jun 6 14:39:47 node2 kernel: [ 49.325498] Linux agpgart interface v0.103
Jun 6 14:39:47 node2 kernel: [ 49.325828] [drm] Initialized drm
1.1.0 20060810
Jun 6 14:39:47 node2 kernel: [ 49.326127] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
Jun 6 14:39:47 node2 kernel: [ 49.569183] serial8250: ttyS0 at
I/O 0x3f8 (irq = 4) is a 16550A
Jun 6 14:39:47 node2 kernel: [ 49.569774] 00:0b: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
Jun 6 14:39:47 node2 kernel: [ 49.571023] brd: module loaded
Jun 6 14:39:47 node2 kernel: [ 49.571732] loop: module loaded
Jun 6 14:39:47 node2 kernel: [ 49.572062] Driver 'sd' needs
updating - please use bus_type methods
Jun 6 14:39:47 node2 kernel: [ 49.572362] Driver 'sr' needs
updating - please use bus_type methods
PCI INT D -> GSI 21 (level, low) -> IRQ 21
MAP [ P0 P2 P1 P3 ]
Jun 6 14:39:47 node2 kernel: [ 49.573538] scsi0 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.573887] scsi1 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.575345] ata1: SATA max UDMA/133
cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.575628] ata2: SATA max UDMA/133
cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.575916] work_for_cpu used
greatest stack depth: 5144 bytes left
PCI INT D -> GSI 21 (level, low) -> IRQ 21
MAP [ P0 -- P1 -- ]
Jun 6 14:39:47 node2 kernel: [ 49.577006] scsi2 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.577349] scsi3 : ata_piix
Jun 6 14:39:47 node2 kernel: [ 49.578602] ata3: SATA max UDMA/133
cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.578886] ata4: SATA max UDMA/133
cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21
Jun 6 14:39:47 node2 kernel: [ 49.579275] Intel(R) PRO/1000
Network Driver - version 7.3.21-k3-NAPI
Jun 6 14:39:47 node2 kernel: [ 49.579555] Copyright (c) 1999-2006
Intel Corporation.
Jun 6 14:39:47 node2 kernel: [ 49.579870] e100: Intel(R) PRO/100
Network Driver, 3.5.24-k2-NAPI
Jun 6 14:39:47 node2 kernel: [ 49.580157] e100: Copyright(c)
1999-2006 Intel Corporation
Jun 6 14:39:47 node2 kernel: [ 49.580478] sky2 driver version 1.22
Jun 6 14:39:47 node2 kernel: [ 49.580789]
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 14:39:47 node2 kernel: [ 49.586935] eth0: VIA Rhine III at
0x1e800, 00:22:b0:61:00:9a, IRQ 16.
Jun 6 14:39:47 node2 kernel: [ 49.587927] eth0: MII PHY found at
address 1, status 0x786d advertising 05e1 Link 45e1.
Jun 6 14:39:47 node2 kernel: [ 49.588527] console [netcon0] enabled
Jun 6 14:39:47 node2 kernel: [ 49.588802] netconsole: network
logging started
Jun 6 14:39:47 node2 kernel: [ 49.589167] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
PCI INT A -> GSI 16 (level, low) -> IRQ 16
EHCI Host Controller
new USB bus registered, assigned bus number 1
debug port 2
irq 16, io mem 0xf5ffe000
USB 2.0 started, EHCI 1.00
Jun 6 14:39:47 node2 kernel: [ 49.604285] usb usb1: New USB
device found, idVendor=1d6b, idProduct=0002
Jun 6 14:39:47 node2 kernel: [ 49.604567] usb usb1: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 14:39:47 node2 kernel: [ 49.605082] usb usb1: Product: EHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 ehci_hcd
0000:00:1a.0
Jun 6 14:39:47 node2 kernel: [ 49.605957] usb usb1: configuration
#1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 49.606272] hub 1-0:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 49.606551] hub 1-0:1.0: 2 ports detected
PCI INT A -> GSI 23 (level, low) -> IRQ 23
EHCI Host Controller
new USB bus registered, assigned bus number 2
debug port 2
irq 23, io mem 0xf5ffd000
USB 2.0 started, EHCI 1.00
Jun 6 14:39:47 node2 kernel: [ 49.622229] usb usb2: New USB
device found, idVendor=1d6b, idProduct=0002
Jun 6 14:39:47 node2 kernel: [ 49.622508] usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 14:39:47 node2 kernel: [ 49.623024] usb usb2: Product: EHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 ehci_hcd
0000:00:1d.0
Jun 6 14:39:47 node2 kernel: [ 49.623897] usb usb2: configuration
#1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 49.624210] hub 2-0:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 49.624487] hub 2-0:1.0: 2 ports detected
Jun 6 14:39:47 node2 kernel: [ 49.624861] ohci_hcd: USB 1.1
'Open' Host Controller (OHCI) Driver
Jun 6 14:39:47 node2 kernel: [ 49.625167] uhci_hcd: USB Universal
Host Controller Interface driver
Jun 6 14:39:47 node2 kernel: [ 49.625497] usbcore: registered new
interface driver usblp
Jun 6 14:39:47 node2 kernel: [ 49.625777] Initializing USB Mass
Storage driver...
Jun 6 14:39:47 node2 kernel: [ 49.626080] usbcore: registered new
interface driver usb-storage
Jun 6 14:39:47 node2 kernel: [ 49.626359] USB Mass Storage
support registered.
Jun 6 14:39:47 node2 kernel: [ 49.626659] usbcore: registered new
interface driver libusual
Jun 6 14:39:47 node2 kernel: [ 49.627023] PNP: No PS/2 controller
found. Probing ports directly.
Jun 6 14:39:47 node2 kernel: [ 49.629486] serio: i8042 KBD port
at 0x60,0x64 irq 1
Jun 6 14:39:47 node2 kernel: [ 49.629765] serio: i8042 AUX port
at 0x60,0x64 irq 12
Jun 6 14:39:47 node2 kernel: [ 49.630082] mice: PS/2 mouse device
common for all mice
Jun 6 14:39:47 node2 kernel: [ 49.630472] rtc_cmos 00:03: RTC can
wake from S4
Jun 6 14:39:47 node2 kernel: [ 49.630783] rtc_cmos 00:03: rtc
core: registered rtc_cmos as rtc0
Jun 6 14:39:47 node2 kernel: [ 49.631084] rtc0: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
Jun 6 14:39:47 node2 kernel: [ 49.631406] i801_smbus
0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 6 14:39:47 node2 kernel: [ 49.632848] cpuidle: using governor ladder
Jun 6 14:39:47 node2 kernel: [ 49.633529] cpuidle: using governor menu
Jun 6 14:39:47 node2 kernel: [ 49.634348] usbcore: registered new
interface driver hiddev
Jun 6 14:39:47 node2 kernel: [ 49.634647] usbcore: registered new
interface driver usbhid
Jun 6 14:39:47 node2 kernel: [ 49.634930] usbhid: v2.6:USB HID
core driver
Jun 6 14:39:47 node2 kernel: [ 49.635283] Advanced Linux Sound
Architecture Driver Version 1.0.20.
PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 6 14:39:47 node2 kernel: [ 49.671152] #0: HDA Intel at
0xf5ff8000 irq 22
Jun 6 14:39:47 node2 kernel: [ 49.671441] Netfilter messages via
NETLINK v0.30.
Jun 6 14:39:47 node2 kernel: [ 49.671726] nf_conntrack version
0.5.0 (16384 buckets, 65536 max)
registering with nfnetlink.
Jun 6 14:39:47 node2 kernel: [ 49.672904] ip_tables: (C)
2000-2006 Netfilter Core Team
Jun 6 14:39:47 node2 kernel: [ 49.673204] TCP cubic registered
Jun 6 14:39:47 node2 kernel: [ 49.673477] NET: Registered
protocol family 17
Jun 6 14:39:47 node2 kernel: [ 49.674023] RPC: Registered udp
transport module.
Jun 6 14:39:47 node2 kernel: [ 49.674298] RPC: Registered tcp
transport module.
Jun 6 14:39:47 node2 kernel: [ 49.674582] TIPC: Activated
(version 1.7.6 compiled May 31 2011 02:14:31)
Jun 6 14:39:47 node2 kernel: [ 49.674988] NET: Registered
protocol family 30
Jun 6 14:39:47 node2 kernel: [ 49.675265] TIPC: Started in single
node mode
Jun 6 14:39:47 node2 kernel: [ 49.677230] registered taskstats version 1
Jun 6 14:39:47 node2 kernel: [ 49.677605] Magic number: 15:67:687
Jun 6 14:39:47 node2 kernel: [ 49.893920] ata3: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 49.907197] usb 1-1: new high speed
USB device using ehci_hcd and address 2
Jun 6 14:39:47 node2 kernel: [ 50.021252] usb 1-1: New USB device
found, idVendor=8087, idProduct=0020
Jun 6 14:39:47 node2 kernel: [ 50.021532] usb 1-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.021889] usb 1-1: configuration
#1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.022350] hub 1-1:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 50.022737] hub 1-1:1.0: 6 ports detected
Jun 6 14:39:47 node2 kernel: [ 50.125601] usb 2-1: new high speed
USB device using ehci_hcd and address 2
Jun 6 14:39:47 node2 kernel: [ 50.179633] eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1
Jun 6 14:39:47 node2 kernel: [ 50.239633] usb 2-1: New USB device
found, idVendor=8087, idProduct=0020
Jun 6 14:39:47 node2 kernel: [ 50.239912] usb 2-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.240294] usb 2-1: configuration
#1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.240961] hub 2-1:1.0: USB hub found
Jun 6 14:39:47 node2 kernel: [ 50.241377] hub 2-1:1.0: 8 ports detected
Jun 6 14:39:47 node2 kernel: [ 50.334081] ata1.00: SATA link up
3.0 Gbps (SStatus 123 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 50.334402] ata1.01: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 50.353378] ata1.00: ATA-8: SAMSUNG
HD502HJ, 1AJ10001, max UDMA/133
Jun 6 14:39:47 node2 kernel: [ 50.353658] ata1.00: 976773168
sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 6 14:39:47 node2 kernel: [ 50.373259] ata1.00: configured for
UDMA/133
Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
Jun 6 14:39:47 node2 kernel: [ 50.374645] sd 0:0:0:0: Attached
scsi generic sg0 type 0
Jun 6 14:39:47 node2 kernel: [ 50.374965] sd 0:0:0:0: [sda]
976773168 512-byte hardware sectors: (500 GB/465 GiB)
Jun 6 14:39:47 node2 kernel: [ 50.375472] sd 0:0:0:0: [sda] Write
Protect is off
Jun 6 14:39:47 node2 kernel: [ 50.375757] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 6 14:39:47 node2 kernel: [ 50.376320] sda: sda1 sda2 sda3 <
sda5 sda6 sda7 >
Jun 6 14:39:47 node2 kernel: [ 50.413849] sd 0:0:0:0: [sda]
Attached SCSI disk
Jun 6 14:39:47 node2 kernel: [ 50.515762] usb 2-1.1: new low
speed USB device using ehci_hcd and address 3
Jun 6 14:39:47 node2 kernel: [ 50.607358] usb 2-1.1: New USB
device found, idVendor=0d62, idProduct=a100
Jun 6 14:39:47 node2 kernel: [ 50.607638] usb 2-1.1: New USB
device strings: Mfr=2, Product=1, SerialNumber=0
Jun 6 14:39:47 node2 kernel: [ 50.608131] usb 2-1.1: Product: USB
Optical Mouse
Jun 6 14:39:47 node2 kernel: [ 50.608419] usb 2-1.1: Manufacturer: Darfon
configuration #1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.612808] input: Darfon USB
Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
Jun 6 14:39:47 node2 kernel: [ 50.613585] generic-usb
0003:0D62:A100.0001: input,hidraw0: USB HID v1.10 Mouse [Darfon USB
Optical Mouse] on usb-0000:00:1d.0-1.1/input0
Jun 6 14:39:47 node2 kernel: [ 50.677311] usb 2-1.2: new low
speed USB device using ehci_hcd and address 4
Jun 6 14:39:47 node2 kernel: [ 50.768315] usb 2-1.2: New USB
device found, idVendor=04f3, idProduct=0103
Jun 6 14:39:47 node2 kernel: [ 50.768594] usb 2-1.2: New USB
device strings: Mfr=0, Product=0, SerialNumber=0
configuration #1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 50.773764] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3
Jun 6 14:39:47 node2 kernel: [ 50.774590] generic-usb
0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID
04f3:0103] on usb-0000:00:1d.0-1.2/input0
Jun 6 14:39:47 node2 kernel: [ 50.779700] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input4
Jun 6 14:39:47 node2 kernel: [ 50.780478] generic-usb
0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID
04f3:0103] on usb-0000:00:1d.0-1.2/input1
Jun 6 14:39:47 node2 kernel: [ 50.843857] usb 2-1.5: new low
speed USB device using ehci_hcd and address 5
Jun 6 14:39:47 node2 kernel: [ 50.967997] usb 2-1.5: New USB
device found, idVendor=051d, idProduct=0002
Jun 6 14:39:47 node2 kernel: [ 50.968277] usb 2-1.5: New USB
device strings: Mfr=3, Product=1, SerialNumber=2
Back-UPS ES 600N FW:876.Q1j.D USB FW:Q1j
Jun 6 14:39:47 node2 kernel: [ 50.969070] usb 2-1.5: Manufacturer: APC
SerialNumber: 5B1035T13167
configuration #1 chosen from 1 choice
Jun 6 14:39:47 node2 kernel: [ 51.134024] ata2.00: SATA link up
1.5 Gbps (SStatus 113 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 51.134303] ata2.01: SATA link down
(SStatus 0 SControl 300)
TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
Jun 6 14:39:47 node2 kernel: [ 51.143115] ata2.00: configured for
UDMA/100
Jun 6 14:39:47 node2 kernel: [ 51.144745] scsi 1:0:0:0: CD-ROM
TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5
32x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 6 14:39:47 node2 kernel: [ 51.153758] Uniform CD-ROM driver
Revision: 3.20
Jun 6 14:39:47 node2 kernel: [ 51.154614] sr 1:0:0:0: Attached
scsi generic sg1 type 5
Jun 6 14:39:47 node2 kernel: [ 51.177746] Sending DHCP requests ., OK
Jun 6 14:39:47 node2 kernel: [ 51.183719] IP-Config: Got DHCP
answer from 192.168.0.2, my address is 192.168.0.4
Jun 6 14:39:47 node2 kernel: [ 51.184283] Automatic setting of
kerrighed_node_id: 4
Jun 6 14:39:47 node2 kernel: [ 51.184583] device=eth0,
addr=192.168.0.4, mask=255.255.255.0, gw=192.168.0.2,
Jun 6 14:39:47 node2 kernel: [ 51.185277] host=node2,
domain=kerrighed.foo.bar, nis-domain=(none),
Jun 6 14:39:47 node2 kernel: [ 51.185576] bootserver=192.168.0.2,
rootserver=192.168.0.2, rootpath=/nfsroot/kerrighed
Jun 6 14:39:47 node2 kernel: [ 51.249621] generic-usb
0003:051D:0002.0004: hiddev96,hidraw3: USB HID v1.10 Device [APC
Back-UPS ES 600N FW:876.Q1j.D USB FW:Q1j] on
usb-0000:00:1d.0-1.5/input0
Jun 6 14:39:47 node2 kernel: [ 51.469642] ata4: SATA link down
(SStatus 0 SControl 300)
Jun 6 14:39:47 node2 kernel: [ 51.469948] md: Waiting for all
devices to be available before autodetect
Jun 6 14:39:47 node2 kernel: [ 51.470242] md: If you don't use
raid, use raid=noautodetect
Jun 6 14:39:47 node2 kernel: [ 51.470741] md: Autodetecting RAID arrays.
Jun 6 14:39:47 node2 kernel: [ 51.471063] md: Scanned 0 and added
0 devices.
Jun 6 14:39:47 node2 kernel: [ 51.471337] md: autorun ...
Jun 6 14:39:47 node2 kernel: [ 51.471610] md: ... autorun DONE.
Jun 6 14:39:47 node2 kernel: [ 51.471900] Looking up port of RPC
100003/2 on 192.168.0.2
Jun 6 14:39:47 node2 kernel: [ 51.473293] Looking up port of RPC
100005/1 on 192.168.0.2
Jun 6 14:39:47 node2 kernel: [ 51.476187] VFS: Mounted root (nfs
filesystem) on device 0:15.
Jun 6 14:39:47 node2 kernel: [ 51.476484] Kerrighed: stage 0
Jun 6 14:39:47 node2 kernel: [ 51.476756] Kerrighed session ID : 1
Jun 6 14:39:47 node2 kernel: [ 51.477030] Kerrighed node ID : 4
Jun 6 14:39:47 node2 kernel: [ 51.477302] Kerrighed min nodes : -1
Jun 6 14:39:47 node2 kernel: [ 51.477576] Kerrighed: stage 1
Jun 6 14:39:47 node2 kernel: [ 51.478033] Kerrighed: stage 2
Jun 6 14:39:47 node2 kernel: [ 51.478314] Init Kerrighed
low-level framework...
Jun 6 14:39:47 node2 kernel: [ 51.478594] Init kerrighed syscall
mechanism
Jun 6 14:39:47 node2 kernel: [ 51.478873] Kerrighed tools - init module
Jun 6 14:39:47 node2 kernel: [ 51.479633] khelper used greatest
stack depth: 4144 bytes left
Jun 6 14:39:47 node2 kernel: [ 51.480397] TIPC: Started in network mode
Jun 6 14:39:47 node2 kernel: [ 51.480686] TIPC: Own node address
<1.1.5>, network identity 1
Jun 6 14:39:47 node2 kernel: [ 51.480979] RPC initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.481341] Init Kerrighed
low-level framework (nodeid 4) : done
Jun 6 14:39:47 node2 kernel: [ 51.481620] Init Kerrighed
distributed services...
Jun 6 14:39:47 node2 kernel: [ 51.481898] KDDM initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.482264] KDDM set init
Jun 6 14:39:47 node2 kernel: [ 51.482617] KDDM set init : done
Jun 6 14:39:47 node2 kernel: [ 51.482946] KDDM initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.483224] KerMM initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.483508] KerMM initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.483783] DVFS initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.484065] FAF: initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.484343] FAF: initialisation : done
Jun 6 14:39:47 node2 kernel: [ 51.484620] DVFS initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.484893] KrgIPC initialisation : start
Jun 6 14:39:47 node2 kernel: [ 51.485258] Shm Server configured
Jun 6 14:39:47 node2 kernel: [ 51.485529] KrgIPC initialisation done
Jun 6 14:39:47 node2 kernel: [ 51.485806] Proc initialisation: start
Jun 6 14:39:47 node2 kernel: [ 51.486162] Proc initialisation: done
Jun 6 14:39:47 node2 kernel: [ 51.486474] EPM initialisation: start
Jun 6 14:39:47 node2 kernel: [ 51.486815] EPM initialisation: done
Jun 6 14:39:47 node2 kernel: [ 51.487091] Init Kerrighed
distributed services: done
Jun 6 14:39:47 node2 kernel: [ 51.487391] scheduler
initialization succeeded!
Jun 6 14:39:47 node2 kernel: [ 51.487665] Kerrighed... loaded!
Jun 6 14:39:47 node2 kernel: [ 51.487965] Freeing unused kernel
memory: 544k freed
Jun 6 14:39:47 node2 kernel: [ 51.488318] Write protecting the
kernel read-only data: 6828k
Jun 6 14:39:47 node2 kernel: [ 51.624798] modprobe used greatest
stack depth: 3312 bytes left
Jun 6 14:39:47 node2 kernel: [ 51.962710] create_static_n used
greatest stack depth: 3288 bytes left
Jun 6 14:39:47 node2 kernel: [ 54.792307] rc used greatest stack
depth: 2824 bytes left
Jun 6 14:39:48 node2 kernel: [ 55.191262] Try to enable bearer on
eth0:<5>TIPC: Enabled bearer <eth:eth0>, discovery domain <1.1.0>,
priority 10
Jun 6 14:39:48 node2 kernel: [ 55.191831] ok
Jun 6 14:39:48 node2 kernel: [ 55.225373] kerrighed: [ADD]
Setting up new nodes 4 ...
Jun 6 14:39:48 node2 kernel: [ 55.225692] kerrighed: [ADD]
Setting up new nodes succeeded.
Jun 6 14:39:48 node2 kernel: [ 55.226192] Kerrighed is running on
1 nodes: 4
Jun 6 14:39:48 node2 kernel: [ 55.266344] successfully registered
scheduler_policy_type round_robin_balancer
Jun 6 14:39:48 node2 kernel: [ 55.293075] successfully registered
scheduler_policy_type mosix_load_balancer
Jun 6 14:40:22 node2 kernel: [ 89.277794] TIPC: Established link
<1.1.5:eth0-1.1.6:eth0> on network plane A
Jun 6 14:40:23 node2 kernel: [ 90.247019] kerrighed: [ADD] Adding
nodes 5 ...
Jun 6 14:40:23 node2 kernel: [ 90.247323] kerrighed: [ADD] Adding
nodes succeeded.
Jun 6 14:40:23 node2 kernel: [ 90.247607] kerrighed: [ADD]
Setting up new nodes 5 ...
Jun 6 14:40:23 node2 kernel: [ 90.266629] kerrighed: [ADD]
Setting up new nodes succeeded.
Jun 6 14:40:23 node2 kernel: [ 90.329300] Kerrighed is running on
2 nodes: 4-5
eid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 17:39:30 node3 kernel: [ 0.000000] Intel GenuineIntel
Jun 6 17:39:30 node3 kernel: [ 0.000000] AMD AuthenticAMD
Jun 6 17:39:30 node3 kernel: [ 0.000000] Centaur CentaurHauls
0000000000000000 - 000000000009fc00 (usable)
000000000009fc00 - 00000000000a0000 (reserved)
00000000000e4000 - 0000000000100000 (reserved)
0000000000100000 - 00000000bff90000 (usable)
00000000bff90000 - 00000000bff9e000 (ACPI data)
00000000bff9e000 - 00000000bffd0000 (ACPI NVS)
00000000bffd0000 - 00000000bffde000 (reserved)
00000000bffe0000 - 00000000c0000000 (reserved)
00000000fee00000 - 00000000fee01000 (reserved)
00000000fff00000 - 0000000100000000 (reserved)
Jun 6 17:39:30 node3 kernel: [ 0.000000] DMI present.
Jun 6 17:39:30 node3 kernel: [ 0.000000] AMI BIOS detected: BIOS
may corrupt low RAM, working around it.
Jun 6 17:39:30 node3 kernel: [ 0.000000] last_pfn = 0xbff90
max_arch_pfn = 0x100000000
Jun 6 17:39:30 node3 kernel: [ 0.000000] x86 PAT enabled: cpu 0,
old 0x7040600070406, new 0x7010600070106
Jun 6 17:39:30 node3 kernel: [ 0.000000] Scanning 0 areas for
low memory corruption
0000000000000000 - 0000000000010000 (reserved)
0000000000010000 - 000000000009fc00 (usable)
000000000009fc00 - 00000000000a0000 (reserved)
00000000000e4000 - 0000000000100000 (reserved)
0000000000100000 - 00000000bff90000 (usable)
00000000bff90000 - 00000000bff9e000 (ACPI data)
00000000bff9e000 - 00000000bffd0000 (ACPI NVS)
00000000bffd0000 - 00000000bffde000 (reserved)
00000000bffe0000 - 00000000c0000000 (reserved)
00000000fee00000 - 00000000fee01000 (reserved)
00000000fff00000 - 0000000100000000 (reserved)
0000000000000000-00000000bff90000
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: RSDP
00000000000fbdf0 00014 (v00 ACPIAM)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: RSDT
00000000bff90000 0003C (v01 A_M_I_ OEMRSDT 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: FACP
00000000bff90200 00084 (v02 A_M_I_ OEMFACP 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: DSDT
00000000bff905c0 0783E (v01 A1126 A1126000 00000000 INTL 20060113)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: FACS
00000000bff9e000 00040
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: APIC
00000000bff90390 0006C (v01 A_M_I_ OEMAPIC 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: MCFG
00000000bff90400 0003C (v01 A_M_I_ OEMMCFG 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: OEMB
00000000bff9e040 00080 (v01 A_M_I_ AMI_OEM 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: HPET
00000000bff97e00 00038 (v01 A_M_I_ OEMHPET 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: GSCI
00000000bff9e0c0 02024 (v01 A_M_I_ GMCHSCI 05001019 MSFT 00000097)
Jun 6 17:39:30 node3 kernel: [ 0.000000] No NUMA configuration found
Jun 6 17:39:30 node3 kernel: [ 0.000000] Faking a node at
0000000000000000-00000000bff90000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Bootmem setup node 0
0000000000000000-00000000bff90000
Jun 6 17:39:30 node3 kernel: [ 0.000000] NODE_DATA
[0000000000013000 - 0000000000017fff]
Jun 6 17:39:30 node3 kernel: [ 0.000000] bootmap
[0000000000018000 - 000000000002fff7] pages 18
Jun 6 17:39:30 node3 kernel: [ 0.000000] (6 early reservations)
==> bootmem [0000000000 - 00bff90000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #1 [0000006000 -
0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #2 [0001000000 -
00018dd198] TEXT DATA BSS ==> [0001000000 - 00018dd198]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #3 [000009e800 -
0000100000] BIOS reserved ==> [000009e800 - 0000100000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #4 [00018de000 -
00018de284] BRK ==> [00018de000 - 00018de284]
Jun 6 17:39:30 node3 kernel: [ 0.000000] #5 [0000010000 -
0000013000] PGTABLE ==> [0000010000 - 0000013000]
Jun 6 17:39:30 node3 kernel: [ 0.000000] found SMP MP-table at
[ffff8800000ff780] ff780
Jun 6 17:39:30 node3 kernel: [ 0.000000] DMA 0x00000010
-> 0x00001000
Jun 6 17:39:30 node3 kernel: [ 0.000000] DMA32 0x00001000
-> 0x00100000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Normal 0x00100000
-> 0x00100000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Movable zone start PFN
for each node
Jun 6 17:39:30 node3 kernel: [ 0.000000] early_node_map[2]
active PFN ranges
Jun 6 17:39:30 node3 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Jun 6 17:39:30 node3 kernel: [ 0.000000] 0: 0x00000100 -> 0x000bff90
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x00] enabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x01] enabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x03] lapic_id[0x82] disabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x04] lapic_id[0x83] disabled)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
Jun 6 17:39:30 node3 kernel: [ 0.000000] IOAPIC[0]: apic_id 2,
version 0, address 0xfec00000, GSI 0-23
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus
0 bus_irq 0 global_irq 2 dfl dfl)
Jun 6 17:39:30 node3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus
0 bus_irq 9 global_irq 9 high level)
Jun 6 17:39:30 node3 kernel: [ 0.000000] Using ACPI (MADT) for
SMP configuration information
0x8086a201 base: 0xfed00000
Jun 6 17:39:30 node3 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2
hotplug CPUs
Jun 6 17:39:30 node3 kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Jun 6 17:39:30 node3 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e4000
Jun 6 17:39:30 node3 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000e4000 - 0000000000100000
Jun 6 17:39:30 node3 kernel: [ 0.000000] Allocating PCI
resources starting at c4000000 (gap: c0000000:3ee00000)
Jun 6 17:39:30 node3 kernel: [ 0.000000] NR_CPUS:64
nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
Jun 6 17:39:30 node3 kernel: [ 0.000000] PERCPU: Embedded 26
pages at ffff8800018fb000, static data 74208 bytes
Jun 6 17:39:30 node3 kernel: [ 0.000000] Built 1 zonelists in
Node order, mobility grouping on. Total pages: 772281
Jun 6 17:39:30 node3 kernel: [ 0.000000] Policy zone: DMA32
root=/dev/nfs nfsroot=192.168.0.2:/nfsroot/kerrighed ip=dhcp rw
session_id=1 autonodeid=1 BOOT_IMAGE=vmlinuz-2.6.30-krg3.0.0-1
Jun 6 17:39:30 node3 kernel: [ 0.000000] Initializing CPU#0
Jun 6 17:39:30 node3 kernel: [ 0.000000] Experimental
hierarchical RCU implementation.
Jun 6 17:39:30 node3 kernel: [ 0.000000] Experimental
hierarchical RCU init done.
Jun 6 17:39:30 node3 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:440
4096 (order: 12, 32768 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.000000] Fast TSC calibration using PIT
Jun 6 17:39:30 node3 kernel: [ 0.000000] Detected 2199.912 MHz
processor.
Jun 6 17:39:30 node3 kernel: [ 0.000999] Console: colour VGA+ 80x25
Jun 6 17:39:30 node3 kernel: [ 0.000999] console [tty0] enabled
Jun 6 17:39:30 node3 kernel: [ 0.000999] Checking aperture...
Jun 6 17:39:30 node3 kernel: [ 0.000999] No AGP bridge found
3079748k/3145280k available (4716k kernel code, 452k absent, 65080k
reserved, 2832k data, 544k init)
Jun 6 17:39:30 node3 kernel: [ 0.000999] SLUB: Genslabs=14,
HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jun 6 17:39:30 node3 kernel: [ 0.000999] HPET: 3 timers in
total, 0 timers will be used for per-cpu timer
Jun 6 17:39:30 node3 kernel: [ 0.000999] Calibrating delay loop
(skipped), value calculated using timer frequency.. 4399.82 BogoMIPS
(lpj=2199912)
Jun 6 17:39:30 node3 kernel: [ 0.001191] Dentry cache hash table
entries: 524288 (order: 10, 4194304 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.004901] Inode-cache hash table
entries: 262144 (order: 9, 2097152 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.006795] Mount-cache hash table
entries: 256
Jun 6 17:39:30 node3 kernel: [ 0.007180] Initializing cgroup subsys ns
Jun 6 17:39:30 node3 kernel: [ 0.007421] Initializing cgroup
subsys cpuacct
Jun 6 17:39:30 node3 kernel: [ 0.007660] Initializing cgroup
subsys freezer
Jun 6 17:39:30 node3 kernel: [ 0.007917] CPU: L1 I cache: 32K,
L1 D cache: 32K
Jun 6 17:39:30 node3 kernel: [ 0.008237] CPU: L2 cache: 1024K
Jun 6 17:39:30 node3 kernel: [ 0.008475] CPU 0/0x0 -> Node 0
Jun 6 17:39:30 node3 kernel: [ 0.008711] CPU: Physical Processor ID: 0
Jun 6 17:39:30 node3 kernel: [ 0.008948] CPU: Processor Core ID: 0
Jun 6 17:39:30 node3 kernel: [ 0.009006] CPU0: Thermal
monitoring enabled (TM2)
Jun 6 17:39:30 node3 kernel: [ 0.009248] using mwait in idle threads.
Jun 6 17:39:30 node3 kernel: [ 0.009507] ACPI: Core revision 20090320
Jun 6 17:39:30 node3 kernel: [ 0.020069] Setting APIC routing to flat
Jun 6 17:39:30 node3 kernel: [ 0.020612] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 6 17:39:30 node3 kernel: [ 0.030861] CPU0: Intel(R)
Jun 6 17:39:30 node3 kernel: [ 0.031995] Booting processor 1
APIC 0x1 ip 0x6000
Jun 6 17:39:30 node3 kernel: [ 0.000999] Initializing CPU#1
Jun 6 17:39:30 node3 kernel: [ 0.000999] Calibrating delay using
timer specific routine.. 4399.69 BogoMIPS (lpj=2199846)
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: L1 I cache: 32K,
L1 D cache: 32K
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: L2 cache: 1024K
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU 1/0x1 -> Node 0
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: Physical Processor ID: 0
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU: Processor Core ID: 1
Jun 6 17:39:30 node3 kernel: [ 0.000999] CPU1: Thermal
monitoring enabled (TM2)
Jun 6 17:39:30 node3 kernel: [ 0.000999] x86 PAT enabled: cpu 1,
old 0x7040600070406, new 0x7010600070106
Jun 6 17:39:30 node3 kernel: [ 0.103121] CPU1: Intel(R)
Jun 6 17:39:30 node3 kernel: [ 0.104268] checking TSC
synchronization [CPU#0 -> CPU#1]: passed.
Jun 6 17:39:30 node3 kernel: [ 0.105003] Brought up 2 CPUs
Jun 6 17:39:30 node3 kernel: [ 0.105240] Total of 2 processors
activated (8799.51 BogoMIPS).
Jun 6 17:39:30 node3 kernel: [ 0.105572] khelper used greatest
stack depth: 5872 bytes left
Jun 6 17:39:30 node3 kernel: [ 0.106057] net_namespace: 1024 bytes
Jun 6 17:39:30 node3 kernel: [ 0.106332] Time: 17:39:21 Date: 06/06/11
Jun 6 17:39:30 node3 kernel: [ 0.106414] NET: Registered
protocol family 16
Jun 6 17:39:30 node3 kernel: [ 0.107007] ACPI: bus type pci registered
Jun 6 17:39:30 node3 kernel: [ 0.107247] PCI: MCFG configuration
0: base f0000000 segment 0 buses 0 - 63
Jun 6 17:39:30 node3 kernel: [ 0.107994] PCI: Not using MMCONFIG.
Jun 6 17:39:30 node3 kernel: [ 0.108229] PCI: Using
configuration type 1 for base access
Jun 6 17:39:30 node3 kernel: [ 0.115083] bio: create slab <bio-0> at 0
Jun 6 17:39:30 node3 kernel: [ 0.124600] ACPI: Interpreter enabled
Jun 6 17:39:30 node3 kernel: [ 0.124840] ACPI: (supports S0 S1 S3 S4 S5)
Jun 6 17:39:30 node3 kernel: [ 0.125217] ACPI: Using IOAPIC for
interrupt routing
Jun 6 17:39:30 node3 kernel: [ 0.125513] PCI: MCFG configuration
0: base f0000000 segment 0 buses 0 - 63
Jun 6 17:39:30 node3 kernel: [ 0.128210] PCI: MCFG area at
f0000000 reserved in ACPI motherboard resources
Jun 6 17:39:30 node3 kernel: [ 0.129810] PCI: Using MMCONFIG at
f0000000 - f3ffffff
Jun 6 17:39:30 node3 kernel: [ 0.137108] ACPI Warning
(tbutils-0246): Incorrect checksum in table [OEMB] - 95, should be
94 [20090320]
Jun 6 17:39:30 node3 kernel: [ 0.139188] ACPI: No dock devices found.
Jun 6 17:39:30 node3 kernel: [ 0.139492] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Jun 6 17:39:30 node3 kernel: [ 0.140055] pci 0000:00:01.0: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.140296] pci 0000:00:01.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.140630] pci 0000:00:1b.0: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.140982] pci 0000:00:1b.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.141271] pci 0000:00:1c.0: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.141513] pci 0000:00:1c.0: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.142008] pci 0000:00:1c.1: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.142250] pci 0000:00:1c.1: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.142765] pci 0000:00:1d.7: PME#
supported from D0 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.142982] pci 0000:00:1d.7: PME# disabled
quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
quirk: region 0480-04bf claimed by ICH6 GPIO
Jun 6 17:39:30 node3 kernel: [ 0.143981] pci 0000:00:1f.0: ICH7
LPC Generic IO decode 1 PIO at 0294 (mask 0003)
Jun 6 17:39:30 node3 kernel: [ 0.144575] pci 0000:00:1f.2: PME#
supported from D3hot
Jun 6 17:39:30 node3 kernel: [ 0.144816] pci 0000:00:1f.2: PME# disabled
Jun 6 17:39:30 node3 kernel: [ 0.145324] pci 0000:02:00.0: PME#
supported from D0 D1 D2 D3hot D3cold
Jun 6 17:39:30 node3 kernel: [ 0.145567] pci 0000:02:00.0: PME# disabled
transparent bridge
Jun 6 17:39:30 node3 kernel: [ 0.156324] ACPI: PCI Interrupt
Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.157417] ACPI: PCI Interrupt
Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.158099] ACPI: PCI Interrupt
Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.158794] ACPI: PCI Interrupt
Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.159527] ACPI: PCI Interrupt
Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 6 17:39:30 node3 kernel: [ 0.160357] ACPI: PCI Interrupt
Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 6 17:39:30 node3 kernel: [ 0.161355] ACPI: PCI Interrupt
Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 6 17:39:30 node3 kernel: [ 0.162356] ACPI: PCI Interrupt
Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 6 17:39:30 node3 kernel: [ 0.163055] SCSI subsystem initialized
Jun 6 17:39:30 node3 kernel: [ 0.163290] usbcore: registered new
interface driver usbfs
Jun 6 17:39:30 node3 kernel: [ 0.163996] usbcore: registered new
interface driver hub
Jun 6 17:39:30 node3 kernel: [ 0.164231] usbcore: registered new
device driver usb
Jun 6 17:39:30 node3 kernel: [ 0.164231] PCI: Using ACPI for IRQ routing
Jun 6 17:39:30 node3 kernel: [ 0.167045] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 0
Jun 6 17:39:30 node3 kernel: [ 0.167411] hpet0: 3 comparators,
64-bit 14.318180 MHz counter
Jun 6 17:39:30 node3 kernel: [ 0.174016] pnp: PnP ACPI init
Jun 6 17:39:30 node3 kernel: [ 0.174273] ACPI: bus type pnp registered
Jun 6 17:39:30 node3 kernel: [ 0.177876] pnp: PnP ACPI: found 15 devices
Jun 6 17:39:30 node3 kernel: [ 0.178121] ACPI: ACPI bus type pnp
unregistered
Jun 6 17:39:30 node3 kernel: [ 0.178369] system 00:01: iomem
range 0xfed14000-0xfed19fff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.178617] system 00:06: ioport
range 0x290-0x297 has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.178862] system 00:07: ioport
range 0x4d0-0x4d1 has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179109] system 00:07: ioport
range 0x800-0x87f has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179349] system 00:07: ioport
range 0x480-0x4bf has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179590] system 00:07: iomem
range 0xfed1c000-0xfed1ffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.179833] system 00:07: iomem
range 0xfed20000-0xfed8ffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180081] system 00:0a: iomem
range 0xffc00000-0xffefffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180326] system 00:0b: iomem
range 0xfec00000-0xfec00fff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180567] system 00:0b: iomem
range 0xfee00000-0xfee00fff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.180810] system 00:0d: iomem
range 0xf0000000-0xf3ffffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.181057] system 00:0e: iomem
range 0x0-0x9ffff could not be reserved
Jun 6 17:39:30 node3 kernel: [ 0.181297] system 00:0e: iomem
range 0xc0000-0xcffff has been reserved
Jun 6 17:39:30 node3 kernel: [ 0.181538] system 00:0e: iomem
range 0xe0000-0xfffff could not be reserved
Jun 6 17:39:30 node3 kernel: [ 0.181779] system 00:0e: iomem
range 0x100000-0xbfffffff could not be reserved
Jun 6 17:39:30 node3 kernel: [ 0.187250] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
Jun 6 17:39:30 node3 kernel: [ 0.187491] pci 0000:00:01.0: IO
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.187732] pci 0000:00:01.0: MEM
window: 0xfc000000-0xfeafffff
PREFETCH window: 0x000000e0000000-0x000000efffffff
Jun 6 17:39:30 node3 kernel: [ 0.188428] pci 0000:00:1c.0: PCI
bridge, secondary bus 0000:03
Jun 6 17:39:30 node3 kernel: [ 0.188666] pci 0000:00:1c.0: IO
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.188905] pci 0000:00:1c.0: MEM
window: disabled
PREFETCH window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.189388] pci 0000:00:1c.1: PCI
bridge, secondary bus 0000:02
Jun 6 17:39:30 node3 kernel: [ 0.189627] pci 0000:00:1c.1: IO
window: 0xe000-0xefff
Jun 6 17:39:30 node3 kernel: [ 0.189867] pci 0000:00:1c.1: MEM
window: 0xfeb00000-0xfebfffff
PREFETCH window: 0x000000faf00000-0x000000faffffff
Jun 6 17:39:30 node3 kernel: [ 0.190562] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:04
Jun 6 17:39:30 node3 kernel: [ 0.190803] pci 0000:00:1e.0: IO
window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.191048] pci 0000:00:1e.0: MEM
window: disabled
PREFETCH window: disabled
Jun 6 17:39:30 node3 kernel: [ 0.191548] pci 0000:00:01.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.191798] pci 0000:00:1c.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.192057] pci 0000:00:1c.1: PCI
INT B -> GSI 17 (level, low) -> IRQ 17
Jun 6 17:39:30 node3 kernel: [ 0.192358] NET: Registered
protocol family 2
Jun 6 17:39:30 node3 kernel: [ 0.200328] IP route cache hash
table entries: 131072 (order: 8, 1048576 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.202199] TCP established hash
table entries: 524288 (order: 11, 8388608 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.209298] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.210359] TCP: Hash tables
configured (established 524288 bind 65536)
Jun 6 17:39:30 node3 kernel: [ 0.210605] TCP reno registered
Jun 6 17:39:30 node3 kernel: [ 0.213287] NET: Registered
protocol family 1
Jun 6 17:39:30 node3 kernel: [ 0.214761] Microcode Update
Jun 6 17:39:30 node3 kernel: [ 0.215243] Scanning for low memory
corruption every 60 seconds
Jun 6 17:39:30 node3 kernel: [ 0.215723] audit: initializing
netlink socket (disabled)
Jun 6 17:39:30 node3 kernel: [ 0.215973] type=2000
audit(1307381961.215:1): initialized
Jun 6 17:39:30 node3 kernel: [ 0.223626] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
Jun 6 17:39:30 node3 kernel: [ 0.226411] VFS: Disk quotas dquot_6.5.2
Jun 6 17:39:30 node3 kernel: [ 0.226739] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
Jun 6 17:39:30 node3 kernel: [ 0.227956] msgmni has been set to 6015
Jun 6 17:39:30 node3 kernel: [ 0.228633] alg: No test for stdrng (krng)
Jun 6 17:39:30 node3 kernel: [ 0.228986] Block layer SCSI
generic (bsg) driver version 0.4 loaded (major 252)
Jun 6 17:39:30 node3 kernel: [ 0.229449] io scheduler noop registered
Jun 6 17:39:30 node3 kernel: [ 0.229689] io scheduler
anticipatory registered
Jun 6 17:39:30 node3 kernel: [ 0.229928] io scheduler deadline
registered
Jun 6 17:39:30 node3 kernel: [ 0.230230] io scheduler cfq
registered (default)
Jun 6 17:39:30 node3 kernel: [ 0.231434] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
Jun 6 17:39:30 node3 kernel: [ 0.231943] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 6 17:39:30 node3 kernel: [ 0.232396] ACPI: Power Button [PWRF]
Jun 6 17:39:30 node3 kernel: [ 0.232717] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 6 17:39:30 node3 kernel: [ 0.233168] ACPI: Power Button [PWRB]
Jun 6 17:39:30 node3 kernel: [ 0.233873] ACPI: SSDT
00000000bffa00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
registered as cooling_device0
Jun 6 17:39:30 node3 kernel: [ 0.235222] ACPI: SSDT
00000000bffa0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
registered as cooling_device1
Jun 6 17:39:30 node3 kernel: [ 0.241586] Non-volatile memory driver v1.3
Jun 6 17:39:30 node3 kernel: [ 0.241828] Linux agpgart interface v0.103
Jun 6 17:39:30 node3 kernel: [ 0.242252] [drm] Initialized drm
1.1.0 20060810
Jun 6 17:39:30 node3 kernel: [ 0.242532] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
Jun 6 17:39:30 node3 kernel: [ 0.488783] serial8250: ttyS0 at
I/O 0x3f8 (irq = 4) is a 16550A
Jun 6 17:39:30 node3 kernel: [ 0.489505] 00:0c: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
Jun 6 17:39:30 node3 kernel: [ 0.491383] brd: module loaded
Jun 6 17:39:30 node3 kernel: [ 0.492433] loop: module loaded
Jun 6 17:39:30 node3 kernel: [ 0.492819] Driver 'sd' needs
updating - please use bus_type methods
Jun 6 17:39:30 node3 kernel: [ 0.493091] Driver 'sr' needs
updating - please use bus_type methods
PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jun 6 17:39:30 node3 kernel: [ 0.493886] scsi0 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.494255] scsi1 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.496010] ata1: PATA max UDMA/100
cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Jun 6 17:39:30 node3 kernel: [ 0.496252] ata2: PATA max UDMA/100
cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Jun 6 17:39:30 node3 kernel: [ 0.496502] work_for_cpu used
greatest stack depth: 5144 bytes left
PCI INT B -> GSI 19 (level, low) -> IRQ 19
MAP [ P0 P2 P1 P3 ]
Jun 6 17:39:30 node3 kernel: [ 0.497617] scsi2 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.497970] scsi3 : ata_piix
Jun 6 17:39:30 node3 kernel: [ 0.499695] ata3: SATA max UDMA/133
cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
Jun 6 17:39:30 node3 kernel: [ 0.499939] ata4: SATA max UDMA/133
cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
Jun 6 17:39:30 node3 kernel: [ 0.500445] Intel(R) PRO/1000
Network Driver - version 7.3.21-k3-NAPI
Jun 6 17:39:30 node3 kernel: [ 0.500688] Copyright (c) 1999-2006
Intel Corporation.
Jun 6 17:39:30 node3 kernel: [ 0.501017] e100: Intel(R) PRO/100
Network Driver, 3.5.24-k2-NAPI
Jun 6 17:39:30 node3 kernel: [ 0.501257] e100: Copyright(c)
1999-2006 Intel Corporation
Jun 6 17:39:30 node3 kernel: [ 0.501565] sky2 driver version 1.22
Jun 6 17:39:30 node3 kernel: [ 0.501979] r8169 Gigabit Ethernet
driver 2.3LK-NAPI loaded
Jun 6 17:39:30 node3 kernel: [ 0.502231] r8169 0000:02:00.0: PCI
INT A -> GSI 17 (level, low) -> IRQ 17
Jun 6 17:39:30 node3 kernel: [ 0.502816] eth0: RTL8102e at
0xffffc2000066c000, 20:cf:30:a5:ec:80, XID 24c00000 IRQ 27
Jun 6 17:39:30 node3 kernel: [ 0.505117] console [netcon0] enabled
Jun 6 17:39:30 node3 kernel: [ 0.505358] netconsole: network
logging started
Jun 6 17:39:30 node3 kernel: [ 0.505767] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
PCI INT A -> GSI 23 (level, low) -> IRQ 23
EHCI Host Controller
new USB bus registered, assigned bus number 1
debug port 1
irq 23, io mem 0xfbffbc00
USB 2.0 started, EHCI 1.00
Jun 6 17:39:30 node3 kernel: [ 0.521298] usb usb1: New USB
device found, idVendor=1d6b, idProduct=0002
Jun 6 17:39:30 node3 kernel: [ 0.521540] usb usb1: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.521988] usb usb1: Product: EHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 ehci_hcd
0000:00:1d.7
Jun 6 17:39:30 node3 kernel: [ 0.522788] usb usb1: configuration
#1 chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.523090] hub 1-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.523333] hub 1-0:1.0: 8 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.523789] ohci_hcd: USB 1.1
'Open' Host Controller (OHCI) Driver
Jun 6 17:39:30 node3 kernel: [ 0.524073] uhci_hcd: USB Universal
Host Controller Interface driver
PCI INT A -> GSI 23 (level, low) -> IRQ 23
UHCI Host Controller
new USB bus registered, assigned bus number 2
detected 2 ports
irq 23, io base 0x0000d480
Jun 6 17:39:30 node3 kernel: [ 0.525968] usb usb2: New USB
device found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.526213] usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.526660] usb usb2: Product: UHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 uhci_hcd
0000:00:1d.0
Jun 6 17:39:30 node3 kernel: [ 0.532921] usb usb2: configuration
#1 chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.533224] hub 2-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.533468] hub 2-0:1.0: 2 ports detected
PCI INT B -> GSI 19 (level, low) -> IRQ 19
UHCI Host Controller
new USB bus registered, assigned bus number 3
detected 2 ports
irq 19, io base 0x0000d800
Jun 6 17:39:30 node3 kernel: [ 0.535453] usb usb3: New USB
device found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.535698] usb usb3: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.536152] usb usb3: Product: UHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 uhci_hcd
0000:00:1d.1
Jun 6 17:39:30 node3 kernel: [ 0.536935] usb usb3: configuration
#1 chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.537235] hub 3-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.537477] hub 3-0:1.0: 2 ports detected
PCI INT C -> GSI 18 (level, low) -> IRQ 18
UHCI Host Controller
new USB bus registered, assigned bus number 4
detected 2 ports
irq 18, io base 0x0000d880
Jun 6 17:39:30 node3 kernel: [ 0.539450] usb usb4: New USB
device found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.539692] usb usb4: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.540140] usb usb4: Product: UHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 uhci_hcd
0000:00:1d.2
Jun 6 17:39:30 node3 kernel: [ 0.540924] usb usb4: configuration
#1 chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.541223] hub 4-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.541467] hub 4-0:1.0: 2 ports detected
PCI INT D -> GSI 16 (level, low) -> IRQ 16
UHCI Host Controller
new USB bus registered, assigned bus number 5
detected 2 ports
irq 16, io base 0x0000dc00
Jun 6 17:39:30 node3 kernel: [ 0.543455] usb usb5: New USB
device found, idVendor=1d6b, idProduct=0001
Jun 6 17:39:30 node3 kernel: [ 0.543696] usb usb5: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Jun 6 17:39:30 node3 kernel: [ 0.544147] usb usb5: Product: UHCI
Host Controller
Linux 2.6.30-krg3.0.0-1 uhci_hcd
0000:00:1d.3
Jun 6 17:39:30 node3 kernel: [ 0.544939] usb usb5: configuration
#1 chosen from 1 choice
Jun 6 17:39:30 node3 kernel: [ 0.545235] hub 5-0:1.0: USB hub found
Jun 6 17:39:30 node3 kernel: [ 0.545475] hub 5-0:1.0: 2 ports detected
Jun 6 17:39:30 node3 kernel: [ 0.545926] usbcore: registered new
interface driver usblp
Jun 6 17:39:30 node3 kernel: [ 0.546183] Initializing USB Mass
Storage driver...
Jun 6 17:39:30 node3 kernel: [ 0.546470] usbcore: registered new
interface driver usb-storage
Jun 6 17:39:30 node3 kernel: [ 0.546712] USB Mass Storage
support registered.
Jun 6 17:39:30 node3 kernel: [ 0.547001] usbcore: registered new
interface driver libusual
Jun 6 17:39:30 node3 kernel: [ 0.547393] PNP: No PS/2 controller
found. Probing ports directly.
Jun 6 17:39:30 node3 kernel: [ 0.550270] serio: i8042 KBD port
at 0x60,0x64 irq 1
Jun 6 17:39:30 node3 kernel: [ 0.550511] serio: i8042 AUX port
at 0x60,0x64 irq 12
Jun 6 17:39:30 node3 kernel: [ 0.550802] mice: PS/2 mouse device
common for all mice
Jun 6 17:39:30 node3 kernel: [ 0.551253] rtc_cmos 00:03: RTC can
wake from S4
Jun 6 17:39:30 node3 kernel: [ 0.551559] rtc_cmos 00:03: rtc
core: registered rtc_cmos as rtc0
Jun 6 17:39:30 node3 kernel: [ 0.551822] rtc0: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
Jun 6 17:39:30 node3 kernel: [ 0.552140] i801_smbus
0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 6 17:39:30 node3 kernel: [ 0.553408] cpuidle: using governor ladder
Jun 6 17:39:30 node3 kernel: [ 0.553648] cpuidle: using governor menu
Jun 6 17:39:30 node3 kernel: [ 0.554791] usbcore: registered new
interface driver hiddev
Jun 6 17:39:30 node3 kernel: [ 0.555072] usbcore: registered new
interface driver usbhid
Jun 6 17:39:30 node3 kernel: [ 0.555316] usbhid: v2.6:USB HID
core driver
Jun 6 17:39:30 node3 kernel: [ 0.555702] Advanced Linux Sound
Architecture Driver Version 1.0.20.
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 6 17:39:30 node3 kernel: [ 0.591148] hda_codec: Unknown
model for ALC883, trying auto-probe from BIOS...
Jun 6 17:39:30 node3 kernel: [ 0.595348] #0: HDA Intel at
0xfbffc000 irq 16
Jun 6 17:39:30 node3 kernel: [ 0.595614] Netfilter messages via
NETLINK v0.30.
Jun 6 17:39:30 node3 kernel: [ 0.595875] nf_conntrack version
0.5.0 (16384 buckets, 65536 max)
registering with nfnetlink.
Jun 6 17:39:30 node3 kernel: [ 0.597203] ip_tables: (C)
2000-2006 Netfilter Core Team
Jun 6 17:39:30 node3 kernel: [ 0.597466] TCP cubic registered
Jun 6 17:39:30 node3 kernel: [ 0.597703] NET: Registered
protocol family 17
Jun 6 17:39:30 node3 kernel: [ 0.598186] RPC: Registered udp
transport module.
Jun 6 17:39:30 node3 kernel: [ 0.598427] RPC: Registered tcp
transport module.
Jun 6 17:39:30 node3 kernel: [ 0.598679] TIPC: Activated
(version 1.7.6 compiled May 31 2011 02:14:31)
Jun 6 17:39:30 node3 kernel: [ 0.599082] NET: Registered
protocol family 30
Jun 6 17:39:30 node3 kernel: [ 0.599327] TIPC: Started in single
node mode
Jun 6 17:39:30 node3 kernel: [ 0.600265] registered taskstats version 1
Jun 6 17:39:30 node3 kernel: [ 0.600632] Magic number: 15:385:693
TSSTcorpCD/DVDW SH-S182F, SB01, max UDMA/33
Jun 6 17:39:30 node3 kernel: [ 0.654234] ata1.00: configured for UDMA/33
Jun 6 17:39:30 node3 kernel: [ 0.656517] scsi 0:0:0:0: CD-ROM
TSSTcorp CD/DVDW SH-S182F SB01 PQ: 0 ANSI: 5
48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 6 17:39:30 node3 kernel: [ 0.664451] Uniform CD-ROM driver
Revision: 3.20
Jun 6 17:39:30 node3 kernel: [ 0.664921] sr 0:0:0:0: Attached
scsi generic sg0 type 5
Jun 6 17:39:30 node3 kernel: [ 0.696071] ata3.00: ATA-7: MAXTOR
STM380215AS, 4.AAB, max UDMA/133
Jun 6 17:39:30 node3 kernel: [ 0.696330] ata3.00: 156301488
sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 6 17:39:30 node3 kernel: [ 0.771065] ata3.00: configured for
UDMA/133
Direct-Access ATA MAXTOR STM380215 4.AA PQ: 0 ANSI: 5
Jun 6 17:39:30 node3 kernel: [ 0.827567] sd 2:0:0:0: [sda]
156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
Jun 6 17:39:30 node3 kernel: [ 0.828030] sd 2:0:0:0: [sda] Write
Protect is off
Jun 6 17:39:30 node3 kernel: [ 0.828289] sd 2:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Attached scsi generic sg1 type 0
Jun 6 17:39:30 node3 kernel: [ 0.852318] sda1 sda2 < sda5 >
Jun 6 17:39:30 node3 kernel: [ 0.875945] sd 2:0:0:0: [sda]
Attached SCSI disk
Jun 6 17:39:30 node3 kernel: [ 1.101983] r8169: eth0: link down
Jun 6 17:39:30 node3 kernel: [ 1.102242] r8169: eth0: link down
Jun 6 17:39:30 node3 kernel: [ 1.876238] async/0 used greatest
stack depth: 5088 bytes left
Jun 6 17:39:30 node3 kernel: [ 2.104052] Sending DHCP requests
.<6>r8169: eth0: link up
Jun 6 17:39:30 node3 kernel: [ 5.079141] ., OK
Jun 6 17:39:30 node3 kernel: [ 5.083144] IP-Config: Got DHCP
answer from 192.168.0.2, my address is 192.168.0.5
Jun 6 17:39:30 node3 kernel: [ 5.083671] Automatic setting of
kerrighed_node_id: 5
Jun 6 17:39:30 node3 kernel: [ 5.083943] device=eth0,
addr=192.168.0.5, mask=255.255.255.0, gw=192.168.0.2,
Jun 6 17:39:30 node3 kernel: [ 5.084509] host=node3,
domain=kerrighed.foo.bar, nis-domain=(none),
Jun 6 17:39:30 node3 kernel: [ 5.084778] bootserver=192.168.0.2,
rootserver=192.168.0.2, rootpath=/nfsroot/kerrighed
Jun 6 17:39:30 node3 kernel: [ 5.085565] md: Waiting for all
devices to be available before autodetect
Jun 6 17:39:30 node3 kernel: [ 5.085807] md: If you don't use
raid, use raid=noautodetect
Jun 6 17:39:30 node3 kernel: [ 5.086247] md: Autodetecting RAID arrays.
Jun 6 17:39:30 node3 kernel: [ 5.086486] md: Scanned 0 and added
0 devices.
Jun 6 17:39:30 node3 kernel: [ 5.086722] md: autorun ...
Jun 6 17:39:30 node3 kernel: [ 5.086956] md: ... autorun DONE.
Jun 6 17:39:30 node3 kernel: [ 5.087220] Looking up port of RPC
100003/2 on 192.168.0.2
Jun 6 17:39:30 node3 kernel: [ 5.088440] Looking up port of RPC
100005/1 on 192.168.0.2
Jun 6 17:39:30 node3 kernel: [ 5.090972] VFS: Mounted root (nfs
filesystem) on device 0:15.
Jun 6 17:39:30 node3 kernel: [ 5.091243] Kerrighed: stage 0
Jun 6 17:39:30 node3 kernel: [ 5.091482] Kerrighed session ID : 1
Jun 6 17:39:30 node3 kernel: [ 5.091719] Kerrighed node ID : 5
Jun 6 17:39:30 node3 kernel: [ 5.091955] Kerrighed min nodes : -1
Jun 6 17:39:30 node3 kernel: [ 5.092193] Kerrighed: stage 1
Jun 6 17:39:30 node3 kernel: [ 5.092515] Kerrighed: stage 2
Jun 6 17:39:30 node3 kernel: [ 5.092750] Init Kerrighed
low-level framework...
Jun 6 17:39:30 node3 kernel: [ 5.092995] Init kerrighed syscall
mechanism
Jun 6 17:39:30 node3 kernel: [ 5.093243] Kerrighed tools - init module
Jun 6 17:39:30 node3 kernel: [ 5.093832] khelper used greatest
stack depth: 4248 bytes left
Jun 6 17:39:30 node3 kernel: [ 5.094308] TIPC: Started in network mode
Jun 6 17:39:30 node3 kernel: [ 5.094559] TIPC: Own node address
<1.1.6>, network identity 1
Jun 6 17:39:30 node3 kernel: [ 5.094809] RPC initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.095107] Init Kerrighed
low-level framework (nodeid 5) : done
Jun 6 17:39:30 node3 kernel: [ 5.095349] Init Kerrighed
distributed services...
Jun 6 17:39:30 node3 kernel: [ 5.095588] KDDM initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.095934] KDDM set init
Jun 6 17:39:30 node3 kernel: [ 5.096253] KDDM set init : done
Jun 6 17:39:30 node3 kernel: [ 5.096567] KDDM initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.096811] KerMM initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.097067] KerMM initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.097303] DVFS initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.097545] FAF: initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.097789] FAF: initialisation : done
Jun 6 17:39:30 node3 kernel: [ 5.098032] DVFS initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.098269] KrgIPC initialisation : start
Jun 6 17:39:30 node3 kernel: [ 5.098592] Shm Server configured
Jun 6 17:39:30 node3 kernel: [ 5.098830] KrgIPC initialisation done
Jun 6 17:39:30 node3 kernel: [ 5.099077] Proc initialisation: start
Jun 6 17:39:30 node3 kernel: [ 5.099383] Proc initialisation: done
Jun 6 17:39:30 node3 kernel: [ 5.099682] EPM initialisation: start
Jun 6 17:39:30 node3 kernel: [ 5.100031] EPM initialisation: done
Jun 6 17:39:30 node3 kernel: [ 5.100269] Init Kerrighed
distributed services: done
Jun 6 17:39:30 node3 kernel: [ 5.100558] scheduler
initialization succeeded!
Jun 6 17:39:30 node3 kernel: [ 5.100796] Kerrighed... loaded!
Jun 6 17:39:30 node3 kernel: [ 5.101056] Freeing unused kernel
memory: 544k freed
Jun 6 17:39:30 node3 kernel: [ 5.101481] Write protecting the
kernel read-only data: 6828k
Jun 6 17:39:30 node3 kernel: [ 5.237111] modprobe used greatest
stack depth: 3416 bytes left
Jun 6 17:39:30 node3 kernel: [ 5.620674] create_static_n used
greatest stack depth: 3392 bytes left
Jun 6 17:39:30 node3 rsyslogd: [origin software="rsyslogd"
swVersion="3.18.6" x-pid="1732" x-info="http://www.rsyslog.com"] restart
Jun 6 17:39:30 node3 kernel: [ 8.988799] Try to enable bearer on
eth0:<5>TIPC: Enabled bearer <eth:eth0>, discovery domain <1.1.0>,
priority 10
Jun 6 17:39:30 node3 kernel: [ 8.989322] ok
Jun 6 17:39:30 node3 kernel: [ 8.989562] TIPC: Established link
<1.1.6:eth0-1.1.5:eth0> on network plane A
Jun 6 17:39:31 node3 kernel: [ 9.990828] successfully registered
scheduler_policy_type round_robin_balancer
Jun 6 17:39:31 node3 kernel: [ 10.013407] successfully registered
scheduler_policy_type mosix_load_balancer
Jun 6 17:39:31 node3 kernel: [ 10.044445] Kerrighed is running on
2 nodes: 4-5
13 (events/2) -> 3887 (dup_finder6.pl)
Jun 6 14:52:07 node2 kernel: [ 792.644957] Check why the page is dirty...
12 (events/1) -> 3888 (dup_finder6.pl)
12 (events/1) -> 3886 (dup_finder6.pl)
13 (events/2) -> 3893 (dup_finder6.pl)
Jun 6 14:52:26 node2 kernel: [ 811.484145] Check why the page is dirty...
Jun 6 14:52:27 node2 kernel: [ 811.945313] CPU 1
remote_cache_filter threshold_filter freq_limit_filter
mosix_load_balancer migration_probe mosix_probe round_robin_balancer
Jun 6 14:52:27 node2 kernel: [ 811.946103] Pid: 2111, comm: krgrpc
Not tainted 2.6.30-krg3.0.0-1 #2 System Product Name
0010:[<ffffffff810b9342>] [<ffffffff810b9342>] __kmalloc+0xa8/0x106
0000:ffff88011d4abab0 EFLAGS: 00010006
Jun 6 14:52:27 node2 kernel: [ 811.947378] RAX: 0000000000000000
RBX: 040000000000005a RCX: ffffffff81472d13
Jun 6 14:52:27 node2 kernel: [ 811.947636] RDX: ffff88002cc27e80
RSI: 0000000000000020 RDI: 0000000000000001
Jun 6 14:52:27 node2 kernel: [ 811.947898] RBP: ffff88011d4abae0
R08: ffff88011fc01740 R09: 0000000000000086
Jun 6 14:52:27 node2 kernel: [ 811.948156] R10: 000000000001b73b
R11: 0000000000000002 R12: 0000000000000282
Jun 6 14:52:27 node2 kernel: [ 811.948417] R13: ffffffff81761330
R14: 0000000000000020 R15: 0000000000000056
0000000000000000(0000) GS:ffff88002cc1a000(0000)
knlGS:0000000000000000
0018 CR0: 000000008005003b
Jun 6 14:52:27 node2 kernel: [ 811.949437] CR2: 00007ff952ab1004
CR3: 000000011c8c4000 CR4: 00000000000006e0
Jun 6 14:52:27 node2 kernel: [ 811.949693] DR0: 0000000000000000
DR1: 0000000000000000 DR2: 0000000000000000
Jun 6 14:52:27 node2 kernel: [ 811.949951] DR3: 0000000000000000
DR6: 00000000ffff0ff0 DR7: 0000000000000400
2111, threadinfo ffff88011d4aa000, task ffff88011e799890)
Jun 6 14:52:27 node2 kernel: [ 811.950966] 0000006000000098
ffff88011a216000 0000000000000056 0000000000000001
Jun 6 14:52:27 node2 kernel: [ 811.965518] RSP <ffff88011d4abab0>
Jun 6 14:52:27 node2 kernel: [ 811.966010] ---[ end trace
381f8ba92e94bae1 ]---
Jun 6 17:54:44 node3 kernel: [ 923.045143] TIPC: Resetting link
<1.1.6:eth0-1.1.5:eth0>, peer not responding
Jun 6 17:54:44 node3 kernel: [ 923.045578] TIPC: Lost link
<1.1.6:eth0-1.1.5:eth0> on network plane A
Jun 6 17:54:44 node3 kernel: [ 923.045795] TIPC: Lost contact with <1.1.5>

--
Dr Louis Rilling Kerlabs
Skype: louis.rilling Batiment Germanium
Phone: (+33|0) 6 80 89 08 23 80 avenue des Buttes de Coesmes
http://www.kerlabs.com/ 35700 Rennes

Alceu Rodrigues de Freitas Junior

2011-06-28 02:18:58 UTC

Permalink

Hello Louis,

Post by Louis Rilling
the IPC version ran fine (as far as I could see), but processes were massively
killed with SIGBUS before the end of the non-IPC version. I still have to find
who could generate those SIGBUS.

Strange... maybe I should create two separated programs so you could
narrow the possibilities. Please let me know if you think this method is
worth trying.

Post by Louis Rilling
By the way, on the setup I used (based on KVM VMs), the IPC version ran for
almost one hour, but the non-IPC version ran for ages before actually crashing.
Do you have sets of parameters that could lead to shorter execution times, and
still trigger the bugs that you oberved?

That's is expected. Running the same code in a multicore PC showed
something like 50% better performance for the IPC version.

Here is something to illustrate the test I have executed:

./dup_finder6.pl -n 5 -s 90 -f 4 -d database.txt -t /home/jackal/tmp >
results.txt

This command will repeat the tests 5 times using 4 child process. If you
want to execute the tests even faster, try to use a file with a small
amount of lines (something like 5000 lines should run fast). Simple
using head or tail in a shell will do it.

Running the non-IPC version against the sequentially processing all the
data showed really bad performance for the parallel code inside
Kerrighed. The best execution that I could get was using the following
capabilities configuration:

Permitted Capabilities: 01067
CHANGE_KERRIGHED_CAP, CAN_MIGRATE, DISTANT_FORK, CHECKPOINTABLE
USE_REMOTE_MEMORY, SEE_LOCAL_PROC_STAT
Effective Capabilities: 05
CHANGE_KERRIGHED_CAP, DISTANT_FORK
Inheritable Permitted Capabilities: 01067
67
CHANGE_KERRIGHED_CAP, CAN_MIGRATE, DISTANT_FORK, CHECKPOINTABLE
USE_REMOTE_MEMORY, SEE_LOCAL_PROC_STAT
Inheritable Effective Capabilities: 03
CHANGE_KERRIGHED_CAP, CAN_MIGRATE

Of course, the non-IPC version spawns lot's and lot's of child process
that are short lived, so the costs of using such technique is much
higher inside the cluster compared to the context switch by the Linux
scheduler in a multicore box.

Regards,
Alceu

Continue reading on narkive:

Search results for 'failure of cluster while using IPC shared memory' (Questions and Answers)

replies

who win the match for jonh and randy ortan?

started 2007-08-19 06:00:21 UTC

rugby league